Scott Lahteine
90c7d28055
Extrudrboard support for Printrboard Rev.F
2017-11-13 15:47:03 -06:00
Scott Lahteine
8b684637bc
Merge pull request #8397 from RowanMeara/rm-M428-1.1.x
...
[1.1.x] Fix M428
2017-11-13 15:11:36 -06:00
Rowan Meara
d2df00bfca
[1.1.x] Fix compilation warnings ( #8395 )
...
* Fix up Travis CI and compile warnings/errors
* No ULTRA_LCD with REPRAP_DISCOUNT_SMART_CONTROLLER
* No point in setting all the endstop plugs
2017-11-13 04:18:19 -06:00
Scott Lahteine
25ec0fecfa
Apply native workspace fixes to G92, G53-59
2017-11-13 01:53:44 -06:00
RowanMeara
227b96b28b
Fix M428
...
This fixes the old implementation of M428 which was broken, did not
match the website, and made no sense.
2017-11-13 01:34:43 -06:00
Scott Lahteine
a2c013c8c7
Fix LCD pins for Printrboard v1
2017-11-13 00:10:27 -06:00
Scott Lahteine
f27196214b
Fix Printrboard pins for parity with 2.0
2017-11-13 00:03:11 -06:00
Scott Lahteine
aa616cd410
No leveling data in M114 without leveling
2017-11-12 23:06:16 -06:00
Scott Lahteine
5926159890
Fix report_current_position
...
Thanks @RowanMeara!
2017-11-12 22:57:57 -06:00
Roxy-3D
c9f88297b8
Provide more clearance for BL-Touch probe
2017-11-12 13:09:10 -06:00
Scott Lahteine
5cc87abb3a
Merge pull request #8381 from thinkyhead/bf1_native_followup
...
[1.1] Remove offsets from soft endstops, tool change
2017-11-11 23:13:40 -06:00
Scott Lahteine
355dfed437
Coding standard patch of M290
2017-11-11 22:16:13 -06:00
Scott Lahteine
802ae73b13
Turn off laser power pin when PWM goes to 0
2017-11-11 22:02:19 -06:00
Scott Lahteine
549c814e8d
Remove offsets from soft endstops, tool change
2017-11-11 21:28:32 -06:00
Scott Lahteine
564fbc8dec
M290 constrain patch
2017-11-11 20:50:16 -06:00
Scott Lahteine
df44bcc5ae
Use do_blocking_move_to where possible
2017-11-10 20:37:41 -06:00
Scott Lahteine
3293823642
Add pre-calculated planner.e_factor
2017-11-10 20:09:59 -06:00
Scott Lahteine
24b302c001
Fix cold/lengthy extrusion handling
2017-11-10 20:09:59 -06:00
Thomas Moore
4714fb8fcb
Normalize load/unload length in M600
2017-11-10 19:59:26 -06:00
Scott Lahteine
b0ff3a4c6d
Cleanup around updatePID
2017-11-10 19:17:46 -06:00
Scott Lahteine
7aadfe32e7
Prevent position_is_reachable disaster
2017-11-10 19:17:45 -06:00
LVD-AC
8ce9306b27
PROBE_SELECTED etc.
2017-11-10 19:17:45 -06:00
Scott Lahteine
80682ec61e
Updates Traditional Chinese, rebase for bugfix-1.1.x
2017-11-10 04:49:09 -06:00
Scott Lahteine
deaa70c2cc
Update macros for parity with 2.0.x
2017-11-10 04:32:27 -06:00
Scott Lahteine
7535c21894
Remove some trailing white-space
2017-11-10 03:38:58 -06:00
Roxy-3D
8327667988
Correct gMax 1.5+ nozzle size to the right number
...
Also... Doing a 'Direct Commit' to see if that is 'acceptable' for small changes like this. I want to look at the commit history and see how the logs handle this type of change.
2017-11-09 20:00:55 -06:00
Scott Lahteine
b6b4bf0959
Merge pull request #8345 from tcm0116/1.1.x-delta_height
...
[1.1.x] Add delta_height variable in lieu of using home_offset
2017-11-09 01:19:48 -06:00
Thomas Moore
658e1ebe5a
Add delta_height variable in lieu of using home_offset
2017-11-08 23:21:02 -06:00
Scott Lahteine
54963cc898
Fix _manual_goto_xy on kinematic systems
2017-11-08 23:18:55 -06:00
Scott Lahteine
ad879a1f90
Clarify some motion code
2017-11-08 23:18:55 -06:00
Scott Lahteine
513f25d42c
Remove redundant dual stepper driver entries
2017-11-08 20:26:54 -06:00
Scott Lahteine
2559745f54
Tweaks to core motion code
2017-11-08 20:08:20 -06:00
Scott Lahteine
7326fe1136
Fix tilt_mesh_based_on_probed_grid output bug
2017-11-08 20:07:02 -06:00
Scott Lahteine
97a43f0c2f
Fix G26 Y position argument
2017-11-08 19:19:21 -06:00
Scott Lahteine
87b655e59e
Fix gcode_get_destination E axis
2017-11-08 12:50:40 -06:00
Roxy-3D
677d490b5c
Add defaults for basic extrusion to Configuration.h files ( #8331 )
2017-11-08 11:02:47 -06:00
Roxy-3D
6ee4ba6932
We need motion even with !HAS_MESH ( #8330 )
...
Thank You MagoKimbra !
2017-11-08 09:58:18 -06:00
Scott Lahteine
4a857f1af6
Followup to G33/LCD patch #8318
2017-11-08 00:46:30 -06:00
Scott Lahteine
1d0739d6d1
Patch G33 misuse of PROBE_MANUALLY
2017-11-07 22:28:54 -06:00
Scott Lahteine
69a7d4e0a5
Conditionals updates from #7979
2017-11-07 21:20:38 -06:00
Scott Lahteine
5fe15c7f10
Patch abuse of sprintf_P in G33
2017-11-07 17:35:32 -06:00
Rowan Meara
094bebcc2d
[1.1.x] Update Thermal Protection Documentation ( #8282 )
...
* Fix thermal protection documentation.
Even before the recent thermal protection changes, the documentation of
the thermal protection feature in the config files did not match the
implementation. I fixed the documentation and reconciled the M303
implementation with the documentation.
* Applied documentation changes to sample config files
* Renamed hysteresis to watch_temp_increase
* Added gcodes back into documentation.
2017-11-07 15:52:28 -06:00
Scott Lahteine
abb15bc30a
Followup patch for G92
2017-11-07 13:08:38 -06:00
Scott Lahteine
8e18e05d1d
Merge pull request #8309 from thinkyhead/bf1_fixes_for_117
...
[1.1] Fix G92 for native workspace
2017-11-07 12:52:55 -06:00
Scott Lahteine
aa80882bdf
Merge pull request #8306 from Kaibob2/patch-4
...
Length fix and translation
2017-11-07 12:27:37 -06:00
Scott Lahteine
e4466b55b5
Fix G92 for native workspace
2017-11-07 12:27:05 -06:00
Kai
b60efb4230
Length fix and translation
...
If #define MSG_Z_FADE_HEIGHT is xx.xx then the last character is crashing into the value
2017-11-07 18:16:30 +01:00
Thomas Moore
2f4a42b313
Fix Delta EEPROM
2017-11-07 16:55:06 +00:00
Scott Lahteine
e1ab285435
Fix some section sizes in EEPROM head comment
2017-11-06 22:41:27 -06:00
Scott Lahteine
26ebeadfaa
Eliminate some compiler warnings
2017-11-06 22:41:27 -06:00
Scott Lahteine
30e4b85587
Fix M118 parameters, with strict guideline
2017-11-06 22:41:27 -06:00
Scott Lahteine
44edffa0a9
Fix SLOW_PWM_HEATERS, issues already patched in 2.0.x
2017-11-06 22:40:44 -06:00
Scott Lahteine
ddf5d68815
Fix non-extended font option
2017-11-06 21:43:18 -06:00
Scott Lahteine
298863c2d0
Tweak an EEPROM loop
2017-11-06 20:16:57 -06:00
Rowan Meara
8e8787ad63
Fixed EEPROM CRC ( #8283 )
...
Fix EEPROM reversion.
2017-11-06 19:18:42 -06:00
Roxy-3D
12151e62ee
Fix G26's circle drawing... ( #8291 )
...
* Fix G26's circle drawing...
This mostly catches the bugfix-v1.1.x branch up to bugfix-v2.0.0
I'll have to do something similar to get bugfix-v2.0.0 caught up to
bugfix-v1.1.x
* only use planner.leveling_active if appropriate
2017-11-06 18:26:47 -06:00
Scott Lahteine
efc1029226
Update bilinear for native workspace
2017-11-06 17:03:34 -06:00
Scott Lahteine
1b09733e7c
Fix FWRETRACT un-hop
2017-11-05 18:33:10 -06:00
Scott Lahteine
d8ef9bda18
Fix point_t pointer in Nozzle::zigzag
2017-11-05 18:32:32 -06:00
Scott Lahteine
267c247da7
Cleanup Nozzle class, fix XY vs Z move order
2017-11-05 18:14:18 -06:00
Scott Lahteine
8ab368559a
Implement CNC_COORDINATE_SYSTEMS
2017-11-04 22:30:23 -05:00
Scott Lahteine
bb111b928b
Add CNC_COORDINATE_SYSTEMS to configs
2017-11-04 22:30:23 -05:00
Scott Lahteine
91abf07087
Cleanup and fix G33
2017-11-04 22:30:23 -05:00
Scott Lahteine
e642a64b68
Prettify some EEPROM code
2017-11-04 22:00:45 -05:00
Scott Lahteine
64f077fd2a
Remove I2CPEM workspace offset
2017-11-04 22:00:45 -05:00
Scott Lahteine
5fefa200ba
Tweaks to cubic_b_sline code style
2017-11-04 22:00:45 -05:00
Kris Kersey
46c2841904
Added support for Anet LCD on Ramps board.
...
Working pin map for Anet LCD display.
Pins 1 and 2 must be swapped on cable.
2017-11-04 21:30:08 -05:00
Scott Lahteine
f9f0ee0f21
Update G2/G3 Workspace Planes
2017-11-04 14:35:25 -05:00
Scott Lahteine
640526f0c8
Operate in Native Machine Space
2017-11-03 22:40:30 -05:00
Scott Lahteine
9af9596f69
Merge pull request #8241 from machaj/fix-links-to-probes
...
Fix probes configuration url
2017-11-03 13:36:20 -05:00
Jan Macháček
0c4e9980fb
Fix probes configuration url
2017-11-03 14:42:02 +01:00
AnHardt
13a3fb1acc
Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()'
...
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
2017-11-03 12:16:42 +01:00
Scott Lahteine
343dd1c0b8
Remove G33 trailing whitespace
2017-11-03 04:06:38 -05:00
Scott Lahteine
64029ef8a6
Merge pull request #8179 from thinkyhead/bf1_config_tweak
...
[1.1.x] Faster menu navigation for Anet A8
2017-11-03 03:59:21 -05:00
Scott Lahteine
524f4ee0cf
Tweak to M330 thermal protection
2017-11-03 03:57:11 -05:00
Scott Lahteine
34aeaec553
Remove ADKey steps acceleration
2017-11-03 03:42:52 -05:00
Luc Van Daele
0e4b6b373d
[1.1.x] G33 magic numbers ( #8173 )
...
* [1.1.x] G33 magic numbers
* oops
* comments
* oops
* warning
* better comment section
* remarks
* extra grids
2017-11-03 03:35:53 -05:00
Scott Lahteine
193a0e9273
pid_autotune parity with 2.0.x
2017-11-03 03:26:47 -05:00
Rowan Meara
39cc36d3f1
[1.1.x] M303 thermal runaway protection ( #8209 )
...
* Added M303 thermal runaway protection
Currently, thermal runaway protection is not available during M303.
Therefore, if someone plugs the thermistors in incorrectly and goes to
autotune their printer, the printer temperature could runaway and damage
could occur.
* Replace removed line, clarifying its logic
2017-11-03 03:16:39 -05:00
Scott Lahteine
87d3a1ae4d
Merge pull request #8228 from tcm0116/1.0.x-dual_stepper
...
[1.1.x] Fix automatic stepper assignment for X/Y/Z dual stepper drivers
2017-11-03 03:08:43 -05:00
AnHardt
dcd7949544
Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR
2017-11-03 04:45:13 +01:00
Thomas Moore
277eb16d67
Fix automatic stepper assignment for X/Y/Z dual stepper drivers
2017-11-02 18:50:25 -05:00
jmdearras
c9980c0a5c
Restore MKS_GEN_L
...
Removed by accident, I presume, when the file was cleaned up
2017-11-02 12:14:54 -04:00
jmdearras
3e9504d306
Fix case light "off" function ( #8205 )
...
* Fix case light "off" function
It would only turn the light off if brightness was 255
* Update Marlin_main.cpp
2017-11-01 21:17:23 -05:00
Scott Lahteine
4bf0e15653
Allow asterisks in G-Code commands
...
Addressing #6655
2017-10-31 21:14:56 -05:00
Scott Lahteine
f02ca2a9a3
Organize boards.h by architecture
2017-10-31 16:12:07 -05:00
Scott Lahteine
4fb3ce4739
Support for SilverGate Board
2017-10-31 15:26:27 -05:00
Scott Lahteine
704640bf98
Faster menu navigation for Anet A8
...
Addressing #8166
2017-10-31 14:44:48 -05:00
Scott Lahteine
db6de76acb
Only show custom bootscreen once
2017-10-31 01:52:35 -05:00
GMagician
15be1cb9a9
[1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour ( #8177 )
...
* [1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour
NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed
* Update Marlin_main.cpp
* Update Marlin_main.cpp
* Update Marlin_main.cpp
2017-10-30 22:50:50 -05:00
Scott Lahteine
893092ff7f
Kinematic clamp_to_software_endstops
2017-10-30 16:24:45 -05:00
Scott Lahteine
8b7c1e9cec
Fix for MAX_VFAT_ENTRIES sanity check
2017-10-30 16:24:45 -05:00
Scott Lahteine
393ceb28fc
The plural of 'axis' is 'axes'
2017-10-30 14:49:51 -05:00
Scott Lahteine
d9cb7be444
Merge pull request #8160 from thinkyhead/bf1_fixup_sd_reprint
...
[1.1.x] Simplify SD_REPRINT_LAST_SELECTED_FILE
2017-10-29 23:57:44 -05:00
Scott Lahteine
5837f067cf
Tweak to QUICK_HOME comment
2017-10-29 23:50:02 -05:00
Scott Lahteine
5e5a177934
No hacks needed for SD_REPRINT_LAST_SELECTED_FILE
2017-10-29 22:44:03 -05:00
Scott Lahteine
0b5b03d9dc
Tweak for soft endstops
2017-10-29 20:16:22 -05:00
Scott Lahteine
9288d80613
Merge pull request #8156 from thinkyhead/bf1_anet_10_servo
...
[1.1.x] Define a default SERVO0_PIN for Anet 1.0
2017-10-29 19:53:49 -05:00
Scott Lahteine
6698db29de
Update LCD draw condition
2017-10-29 19:17:32 -05:00
Scott Lahteine
25e86a520d
Merge pull request #8114 from thinkyhead/bf1_print_sd_file_again
...
[1.1.x] Cleanup for SD Print Again
2017-10-29 19:09:34 -05:00
Scott Lahteine
b0e282a74b
Cleanups for SD_REPRINT_LAST_SELECTED_FILE
2017-10-29 19:02:17 -05:00
Scott Lahteine
46ed54cd8e
Include time scale in some planner vars
2017-10-29 18:48:14 -05:00
Scott Lahteine
9c870baf84
Add a hidden 8s watchdog option for easier debugging
2017-10-29 18:34:57 -05:00
Scott Lahteine
471c2b5d5c
Provide a default SERVO0_PIN for Anet 1.0
2017-10-29 18:34:57 -05:00
Scott Lahteine
e792c2b234
Followup to #8123 - to match 2.0.x changes
2017-10-29 05:39:44 -05:00
Scott Lahteine
daa85f71e1
Merge pull request #8123 from thinkyhead/bf1_dual_xyz_endstops
...
[1.1.x] Dual endstops XYZ
2017-10-29 04:36:09 -05:00
Rowan Meara
9850ba0cbd
[1.1.x] Fix M303 thermal protection #8103 ( #8126 )
...
* Fixed M303 thermal protection
The temperature sanity checking logic was not being applied during M303
(pid autotuning) because instead of setting a target temperature, it
directly manipulated the pwm values. When PIDTEMP/PIDTEMPBED is
enabled, PWM values rather than the target temperature determine whether
the heater is on. I changed this to look directly at the PWM amount
when pid is enabled.
* Turn off heaters on M303 error
Currently, PID autotuning stops if it overshoots the temperature by 20C
or if if the temperature does not change for 20 minutes and it times
out. I added calls to disable the heaters in these scenarios.
* Removed unnecessary if statement.
Added changes suggested by GMagician.
* Update temperature.cpp
* Update temperature.cpp
* Update temperature.cpp
2017-10-29 04:34:47 -05:00
Scott Lahteine
318c419f77
Implement support for Dual X and Y endstops
2017-10-29 03:49:45 -05:00
Scott Lahteine
7e1232269a
Add Dual Steppers / Endstops to configs
2017-10-29 03:49:45 -05:00
Scott Lahteine
62d52d62dc
Cleanup for DIGIPOTS settings
2017-10-29 03:49:32 -05:00
LVD-AC
77cf42588f
(1.1.x) serious bug G33
2017-10-29 00:22:55 +02:00
Scott Lahteine
a979c428ee
Revert default BABYSTEP_MULTIPLICATOR to 1
2017-10-27 19:42:51 -05:00
jmdearras
6920769a9a
Added MKS GEN L board ( #8088 )
...
[1.1.x] Add MKS GEN L board
2017-10-27 02:13:41 -05:00
Scott Lahteine
410aa0716d
Concise SD_REPRINT_LAST_SELECTED_FILE description
2017-10-27 00:10:04 -05:00
Scott Lahteine
445a7f65cd
Clean up trailing whitespace
2017-10-27 00:02:35 -05:00
Luc Van Daele
e64cfb13b8
(1.1.x) auto tune calibration parameters ( #8031 )
...
* auto tune calibration parameters
* solve warnings
* Tweaks to formatting
* review Thinkyhead
* Error
2017-10-26 23:49:20 -05:00
Scott Lahteine
2296d98845
Tweak neopixel self-test
2017-10-26 22:46:11 -05:00
Scott Lahteine
9aac3d8773
Add some Polish translations
...
Thanks @SCiunczyk
2017-10-26 22:44:23 -05:00
Scott Lahteine
6569b9ba56
Fix FWRETRACT logic, apply common sense
2017-10-26 22:36:41 -05:00
Bob-the-Kuhn
7ab9abe4ef
Merge pull request #8107 from Bob-the-Kuhn/1.1.x-reduced-font-fix
...
(bug fix) 1.1.x - save 1400 bytes of FLASH by using reduced font for some languages
2017-10-26 16:09:52 -05:00
Bob-the-Kuhn
3357170b18
give this language an unique name
2017-10-26 15:48:00 -05:00
Roxy-3D
2e746f2b8b
Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE ( #8104 )
...
* Initial conflict resolution
All previous items resolved:
- Use of ELAPSED() on timer code
- Switch to use of defer_return_to_status=true as much as possible
- Update & Clean Up of Max7219 routines
* Resolve non-SD case in ultralcd.cpp
2017-10-26 11:44:55 -05:00
Bob-the-Kuhn
594c075377
1.1.x - save 1400 bytes of FLASH by using reduced font for some languages ( #8095 )
...
* use reduced sized font for some languages
* Fit Portuguese language files to existing scheme
* Rename language_pl-DOGM.h to language_pl_utf8.h
* Rename language_pl_utf8.h to language_pl-DOGM.h
* Update dogm_font_data_ISO10646_1.h
* Update dogm_font_data_ISO10646_1.h
2017-10-25 18:32:38 -05:00
Scott Lahteine
8bb1e91afd
More specific M100 description
2017-10-25 16:11:09 -05:00
Scott Lahteine
a12d1b21b5
Merge pull request #8048 from madmo/mks-mini-gt2560
...
[1.1.x] Add MKS MINI 12864 support to GT2560
2017-10-25 01:13:07 -05:00
Scott Lahteine
5bed2f351a
Fix spacing, use single instances of similar pins
2017-10-24 19:12:40 -05:00
Scott Lahteine
ec9d7b639d
Encourage users to re-examine their configs
2017-10-24 18:33:31 -05:00
Scott Lahteine
1c97c1582c
Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h
2017-10-24 18:25:50 -05:00
Scott Lahteine
f06f4b40b8
Apply physical limits to mesh bounds
2017-10-24 16:49:00 -05:00
Scott Lahteine
3235beef6d
Merge pull request #8073 from thinkyhead/bf1_fix_M600
...
[1.1.x] Fix position sync in M600 pause/resume
2017-10-24 14:56:01 -05:00
Scott Lahteine
e5ab783b08
Merge pull request #8061 from thinkyhead/bf1_general_cleanup
...
[1.1.x] Patch up some verbiage in configs
2017-10-24 14:44:31 -05:00
Scott Lahteine
355ebec92d
Fix position sync in M600 pause/resume
2017-10-24 14:41:54 -05:00
montri2025
fa157f08ff
lcd <20 disply Bed Temperature cast ty ( #8068 )
2017-10-23 23:46:26 -05:00
Scott Lahteine
39a545b3f8
Patch up some verbiage in configs
2017-10-22 17:14:50 -05:00
Roxy-3D
e9bc9a2ab4
change to better (more clear) names ( #8049 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
2017-10-21 10:58:17 -05:00
Moritz Bitsch
b22c87183f
Add MKS MINI 12864 support for GT2560
2017-10-21 13:05:21 +02:00
tweichselbaumer
fa44130734
Add M290 babystepping ( #8014 )
...
* Add M290 babystepping
* Allow `Z` for `M290`
* fix spacing
* Support BABYSTEP_XY in M290
* Not just Z
* Extend M290 for BABYSTEP_ZPROBE_OFFSET
* tweak
2017-10-21 03:58:53 -05:00
MetalSearch
9b3f27f02a
Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 ( #8041 )
...
[1.1.x] Fix EndStops don't work with BOARD_RAMPS_14_EFB on Micromake C1
2017-10-21 00:24:22 -05:00
Scott Lahteine
a7398a0459
Prevent SDCARD_SORT_ALPHA from exploding
2017-10-20 19:14:11 -05:00
Scott Lahteine
91c5c2538a
Add SCROLL_LONG_FILENAMES advanced option
...
Based on #7637 by @marcio-ao
2017-10-20 19:14:10 -05:00
Scott Lahteine
259cf1b0b2
BQ enables this in the config. Remove here
2017-10-18 23:23:56 -05:00
Scott Lahteine
2338632270
Simplify Cartesian probing bounds
...
Followup to #8011
2017-10-18 17:16:14 -05:00
Luc Van Daele
2a88a3fd33
boolval revised ( #8017 )
2017-10-18 14:19:01 -05:00
Thomas Moore
84470f6b2a
Update UBL mesh boundaries to accomidate beds centered at 0, 0 ( #8011 )
2017-10-18 10:03:00 -05:00
studiodyne
e04902f589
Add EXTRA_FAN_SPEED feature
2017-10-16 02:32:30 -05:00
Scott Lahteine
d63d08ef8b
Merge pull request #7948 from gallynero/patch-1
...
Enable change feedrate in delta
2017-10-15 16:28:45 -05:00
Scott Lahteine
5c2ff6ed19
Add Capability BUILD_PERCENT
2017-10-15 03:01:36 -05:00
Scott Lahteine
5f708d47ce
Add LCD_SET_PROGRESS_MANUALLY
2017-10-15 02:21:09 -05:00
Scott Lahteine
3b4b9c6d68
Unaccented French for Character Display
2017-10-14 20:17:29 -05:00
MetalSearch
8df47d76c7
Add control board MAKEBOARD Mini
...
+Add French language without accent for japanese LCD
2017-10-14 20:10:03 -05:00
Scott Lahteine
be55a49946
Merge pull request #7980 from thinkyhead/bf1_granular_sw_endstops
...
[1.1.x] Software endstop options by axis
2017-10-14 17:37:35 -05:00
Scott Lahteine
e05af35678
Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs
2017-10-14 17:14:19 -05:00
Scott Lahteine
060d16d26b
Split the software endstop capability by axis.
...
Based on #7975 and #7979
2017-10-14 17:14:08 -05:00
Scott Lahteine
8dc10fb4c2
Version 1.1.6
2017-10-14 16:04:53 -05:00
Scott Lahteine
3571dd0ad6
Fix Emergency Parser
...
Followup to #7459
2017-10-14 16:04:53 -05:00
Scott Lahteine
e17869ca20
Fix Emergency Parser
...
Followup to #7459
2017-10-14 15:58:07 -05:00
Scott Lahteine
662105c1b6
ADC sensor fix inspired by 'Evgen2' on Twitter
2017-10-14 02:39:13 -05:00
Scott Lahteine
b8ddae61e2
ubl_state no longer needed
2017-10-14 02:39:13 -05:00
Scott Lahteine
ece14af556
Improve LCD leveling value edits
2017-10-14 02:39:13 -05:00
Scott Lahteine
b07a2aa23c
Add HAS_MESH conditional
2017-10-14 02:39:12 -05:00
Scott Lahteine
88857e8028
Move fade_scaling_factor_for_z to Planner
2017-10-14 02:10:46 -05:00
Scott Lahteine
8e808fcadc
General cleanup, apply const
2017-10-13 16:13:36 -05:00
Scott Lahteine
da93a272a0
Move leveling_is_active to a macro
2017-10-13 16:11:27 -05:00
Scott Lahteine
3d5b10735f
Remove obsolete UBL z_offset
2017-10-13 08:23:01 -05:00
gallynero
94228d4522
Enable change feedrate in delta
...
Enable change the relative feedrate on a printing job in delta machines with UBL
2017-10-12 01:55:51 +02:00
Scott Lahteine
22c968ee32
Merge remote-tracking branch 'upstream/bugfix-1.1.x' into 1.1.x
2017-10-10 02:47:02 -05:00
Slawomir Ciunczyk
167058b61f
Different NEOPIXEL types
...
Changes to support NEOPIXEL LED strips
- Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h
- ability to setup startup brightness
- ability to define sequential/non-sequential transition of color change during heating-up
- additional parameter to M150 P<brightness>
2017-10-10 01:58:40 -05:00
Scott Lahteine
f835245ee1
Merge pull request #7908 from thinkyhead/bf1_goodbye_legacy_advance
...
[1.1.x] Remove legacy ADVANCE feature
2017-10-10 00:31:39 -05:00
Scott Lahteine
38110e220d
Segmented manual moves for kinematics
2017-10-09 23:10:17 -05:00
deram
9239fcf0da
Allow UBL G29 and G26 to build without a probe
2017-10-09 18:37:53 -05:00
Scott Lahteine
381ebc043f
Add support for ST7565-64128N
...
Based on #7447 by @Bob-the-Kuhn
2017-10-09 17:39:03 -05:00
jmdearras
c7e0a49c94
Add some new LCD displays
...
- Original CR-10
- MKS Mini Display
2017-10-09 17:39:03 -05:00
Scott Lahteine
067622fcc6
Apply some tweaks based on 2.0.x
2017-10-09 17:39:03 -05:00
Scott Lahteine
ae256576e1
Bring configs into parity with 2.0.x
2017-10-09 17:38:39 -05:00
Scott Lahteine
cbfcce09fa
Remove legacy ADVANCE feature
2017-10-09 04:27:45 -05:00
Scott Lahteine
a21201a713
LCD filename already concatentated
2017-10-07 15:14:58 -05:00
Scott Lahteine
53f2f188f2
LCD filename already concatenated
2017-10-07 15:11:28 -05:00
Scott Lahteine
a6e95c7d25
Fix display issue with SD_ALPHA_SORT caching
2017-10-07 15:07:05 -05:00
Dave Johnson
97e6663bb3
[1.1.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled ( #7878 )
...
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled
If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM.
add HD44780 too
* Reduce lines used
* Reduce lines used
2017-10-07 15:00:56 -05:00
Scott Lahteine
e2ceb1b800
Merge pull request #7632 from GMagician/Wrong-sanitycheck-message-fix
...
Addressing #7612
2017-10-07 02:25:35 -05:00
Scott Lahteine
8c93295d62
Merge pull request #7873 from thinkyhead/bf1_anet_encoder_pulses
...
[1.1.x] Fixing ANET encoder pulses
2017-10-07 01:21:14 -05:00
Phr3d13
c26242a553
Fixing #7833
2017-10-07 00:07:24 -05:00
Scott Lahteine
dac5f20a01
Patch SD file draw bug
2017-10-06 23:53:08 -05:00
Scott Lahteine
b211fa4e1f
Remove extra NEWPANEL settings in Conditionals_LCD.h
2017-10-06 17:23:32 -05:00
LVD-AC
355cba4aa7
Fixes for G33
2017-10-06 15:52:53 -05:00
Scott Lahteine
e287e14354
Tweak spacing in utf8_mapper.h
2017-10-06 15:11:27 -05:00
Scott Lahteine
5e63ba970d
Merge pull request #7862 from thinkyhead/bf1_mapper_c2c3c4_sk
...
[1.1.x] Added Slovak C2C3C4 mapper implementation.
2017-10-06 14:56:26 -05:00
Roman Moravčík
2a46ab288e
Added Slovak C2C3C4 mapper implementation.
2017-10-06 14:40:15 -05:00
Scott Lahteine
7999249a5c
Set TEMP_SENSOR_0 to 1 in CR-10 example config
...
As pointed out in #7692 by @totalitarian
2017-10-06 14:29:00 -05:00
Scott Lahteine
0ec9a7f090
Fix xon_xoff_state initialization
2017-10-04 12:10:15 -05:00
Scott Lahteine
a47c5c093d
Merge pull request #7459 from ejtagle/xon-xoff-sdxfer
...
[1.1.x] XON/XOFF serial handshake (for faster transfers to SD)
2017-10-02 23:52:41 -05:00
Scott Lahteine
bcb8722513
Fix DUAL_X_CARRIAGE manual move
...
Addressing #7745
2017-10-02 23:28:52 -05:00
Scott Lahteine
4c34b3ad9c
Stop redundant E4_IS_TMC2130 current control
2017-10-02 23:10:34 -05:00
Scott Lahteine
1b8b5c4b06
Make prepare_move_to_destination_dualx a full move function
2017-10-02 23:10:18 -05:00
Scott Lahteine
4e19ff75b6
XON/XOFF corrections, tweaks, formatting, etc.
2017-10-02 03:52:42 -05:00
Scott Lahteine
94caabf89a
Add XON/XOFF options to example configs
2017-10-02 03:52:41 -05:00
Scott Lahteine
f365448338
Merge pull request #7811 from thinkyhead/bf1_fix_resume_print
...
[1.1.x] Fix broken M600 resume_print
2017-10-01 22:54:34 -05:00
GMagician
8ab426c3a4
Updated all examples configurations
...
Forgot to update examples configurations. Done now
2017-10-01 21:04:12 -05:00
GMagician
33d28c24bf
Implementing [FR] #7548
...
Added new configuration to inhibit XYZ movements when home is not done
2017-10-01 21:02:42 -05:00
Scott Lahteine
ac70048945
Only MarlinConfig.h ahead of feature block
2017-10-01 20:55:14 -05:00
MasterPIC
40a4a716e1
Fix filament change bug in resume_print
...
Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion.
Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position.
So the extrusion step is mixed with the movement required to go back to the printing position.
The provided code seems to be working but probably a better fix is required.
2017-10-01 18:42:29 -05:00
Scott Lahteine
802f147686
Remove some excess whitepsace
2017-10-01 18:25:04 -05:00
Scott Lahteine
80a0f935a1
Fix G10-G11 by adding a synchronize
...
Based on #7792 by @tcm0116
2017-09-30 17:46:31 -05:00
MasterPIC
7f8ff0a724
Show leveling status on character LCD
2017-09-27 12:18:41 -05:00
Scott Lahteine
723a34d9c7
Add confirmation to Init EEPROM command
2017-09-27 11:27:47 -05:00
Scott Lahteine
2efd5b119d
Add USER_SCRIPT_RETURN option
2017-09-27 11:23:34 -05:00
Scott Lahteine
b105e47cb5
Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled
...
Based on #7769
2017-09-27 10:39:44 -05:00
DecoyPlatypus
41dcbe89dd
Fixed ST7920_DELAY typo
...
Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3
2017-09-27 03:01:09 -05:00
DecoyPlatypus
70a64355f6
Fixed LCD_FOR_MELZI SanityCheck
...
Sanity Check for LCD_FOR_MELZI would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.
2017-09-27 03:01:09 -05:00
Scott Lahteine
e37a1ded0d
Increase BABYSTEP_MULTIPLICATOR to 100
...
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
2017-09-27 00:14:26 -05:00
Scott Lahteine
3e28243076
No need for LCD_PINS_Dn when unused
2017-09-27 00:12:20 -05:00
Scott Lahteine
bbb94b8f68
babystepping tweak
2017-09-27 00:12:20 -05:00
Scott Lahteine
a277b43e30
Fix babystep menu display
2017-09-27 00:12:20 -05:00
Scott Lahteine
8a994fb1b1
Fix encoder pulses for G3D_PANEL
2017-09-27 00:12:20 -05:00
Scott Lahteine
ac2ac99e15
Fix bad logic in autostart
...
As pointed out by @marcio-ao in #7638
2017-09-24 17:52:35 -05:00
Scott Lahteine
c1cc79176c
Full-featured Creality configs
2017-09-24 16:52:42 -05:00
Scott Lahteine
f25dccd6d1
Disable BABYSTEP_XY by default in all configs
2017-09-24 16:52:42 -05:00
Scott Lahteine
cd09a83cfa
Add size note to SDSORT_LIMIT
2017-09-24 16:52:41 -05:00
Scott Lahteine
9bbc2df217
General code cleanup, spacing
2017-09-24 16:52:41 -05:00
Luc Van Daele
74d430cb97
matrix names update ( #7697 )
...
* matrix names update
* symplified names
* new angle normalization
* ABC
* axis
* least squares
* recalc_delta_settings
* endstop_adj
* 0p
* bug
2017-09-24 01:45:31 -05:00
Scott Lahteine
9d4d53e2fd
Update links to old wiki page
2017-09-23 22:06:45 -05:00
Scott Lahteine
00896f1713
Fix LEVEL_BED_CORNERS (No leveling required)
2017-09-23 22:00:45 -05:00
Scott Lahteine
c3a9e95a5f
Define drawmenu items once, in ultralcd.cpp
2017-09-23 22:00:45 -05:00
Scott Lahteine
0afd25a010
Fix caselight compile issues
2017-09-23 22:00:44 -05:00
GMagician
5b87843fae
Addressing #7612
...
Replaced extruder with hotend
2017-09-07 19:07:36 +02:00
Scott Lahteine
386b74f8c2
Merge pull request #7593 from marcio-ao/bugfix-1.1.x
...
Added option for graphical overlay for Z-offset (Resubmission of #7350 and #7586 )
2017-09-02 00:01:38 -05:00
Tannoo
2a963fb5d1
UBL LCD Bugfixes ( #7598 )
2017-09-01 16:59:06 -05:00
Marcio Teixeira
d69c5317df
Added option for graphical overlay for Z-offset
2017-08-31 14:21:39 -06:00
Scott Lahteine
367e1b54ba
Merge pull request #7591 from thinkyhead/bf1_misc_patches
...
M111: no args reports current flags
2017-08-31 15:19:29 -05:00
Scott Lahteine
8a184a526a
Marlin: Patch G33, allow M111 to give status
2017-08-31 14:35:00 -05:00
Scott Lahteine
353c23b16e
Enforce BED_CENTER_AT_0_0 on Delta, SCARA
2017-08-31 14:34:59 -05:00
Scott Lahteine
898f48e331
CNC workspace planes for G5
...
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
2017-08-31 14:29:29 -05:00
Scott Lahteine
5851c2d36f
MAX7219 followup ( #7564 )
...
* Add MAX7219_DEBUG to Travis CI testing
* Tweak config and use standard pin naming for MAX7219_DEBUG
* MAX7219: Apply coding standards, use macros, etc.
* Make code work...
2017-08-31 11:44:43 -05:00
Scott Lahteine
9c00cff898
Version 1.1.5
2017-08-28 18:46:39 -05:00
Scott Lahteine
f9b9df2497
Merge branch 'bugfix-1.1.x' into new_release_115
2017-08-28 18:42:13 -05:00
Scott Lahteine
52073f21c5
Merge pull request #7556 from thinkyhead/bf1_slovak_language
...
Slovak UTF-8 translation
2017-08-27 21:05:53 -05:00
Scott Lahteine
321f98f867
Fix servo delay in Folgertech config
2017-08-27 20:53:27 -05:00
jneilliii
36771e9492
Fixes required for Creality CR-10
2017-08-27 20:39:16 -05:00
Roxy-3D
3f0b38ed5d
Add Max7219 LED Matrix Debug Support ( #7563 )
...
* Add Max7219 LED Matrix Debug Support
The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.
The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.
* Try to keep Makefile up to date.
2017-08-25 17:03:07 -05:00
GMagician
0067bb2840
Addressing #7552
...
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
2017-08-25 03:23:16 -05:00
Scott Lahteine
2b12093589
Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben
...
New feature: Part-Cooling Fan Multiplexer
2017-08-25 03:16:40 -05:00
Michal Holes
54d48130f3
Slovak UTF-8 translation
...
Slovak UTF-8 translation
2017-08-23 19:14:35 -05:00
Scott Lahteine
86c024ce98
Organize, document pins.h include lines
2017-08-23 18:33:00 -05:00
Scott Lahteine
c7b07d20f2
Minor patches to pins files
2017-08-23 18:32:59 -05:00
Scott Lahteine
356af7dcb0
Tweak Sanguinololu-related pins files
2017-08-23 18:32:59 -05:00
Scott Lahteine
11a724d8fc
Sanguinololu example configuration
2017-08-23 18:32:59 -05:00
Scott Lahteine
e337df2e98
Miscellaneous tweaks to serial outputs, code cleanups
2017-08-23 18:32:58 -05:00
Vben
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
2017-08-18 15:59:04 -05:00
Scott Lahteine
e82e9073d6
Merge pull request #7530 from GMagician/Code-reduction
...
Code reduction with some configurations
2017-08-18 13:57:59 -05:00
GMagician
6127154af3
Fix identation by tab
...
There was a tab instead of spaces
2017-08-18 11:34:55 +02:00
GMagician
b94a1c6b9f
Code reduction this some configurations
...
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
2017-08-18 11:11:00 +02:00
GMagician
405a2132f3
#7529 compile fix
...
I made an error in previous fix
2017-08-17 22:04:28 +02:00
GMagician
869d7f3703
#7504 missing part
...
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
2017-08-17 21:43:47 +02:00
Scott Lahteine
101ba70517
Merge pull request #7505 from thinkyhead/bf1_anet_1_pio
...
Add Anet 1.0 to Platformio.ini
2017-08-17 00:33:20 -05:00
Vben
4817b39d98
Added new feature for AutoParking Extruder (APE)
2017-08-16 17:33:11 -05:00
Scott Lahteine
6772e33ef6
Use [XY]_CENTER for error correction
...
Followup to #7512
2017-08-16 16:13:09 -05:00
Scott Lahteine
385f1bb9e5
Merge pull request #7504 from thinkyhead/bf1_servo_delays
...
Individual servo delays
2017-08-16 16:05:22 -05:00
Scott Lahteine
2a31c9f2ce
Merge pull request #7515 from cdedwards/bugfix-1.1.x
...
Fix for G26 spam output
2017-08-16 16:01:10 -05:00
MTrab
5fa61c0ad3
Add Anet 1.0 to Platformio.ini
...
Added env:anet10 to platformio.ini for easy compile and upload to this board
2017-08-16 15:59:20 -05:00
Scott Lahteine
b3f59ec945
Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16
...
Add "Level Corners" menu item
2017-08-16 15:58:15 -05:00
Tannoo
b33739d493
UBL_Language_Update ( #7520 )
...
* UBL_Language_Update
Translatable strings
* Use slightly better wording...
* Use slightly better wording...
2017-08-16 09:49:04 -05:00
Scott Lahteine
a1878cd1c0
Add "Level Corners" menu option
2017-08-16 02:54:33 -05:00
Scott Lahteine
0a18fb735e
Use "PSU" label to fit on screen
2017-08-16 02:51:00 -05:00
Scott Lahteine
30887feae3
Tweak some formatting in ABL G29
2017-08-16 02:51:00 -05:00
Thomas Moore
257b693ab0
Advanced pause fixes ( #7518 )
...
* Disallow filament change while paused
* Use kinematic movemements in pause_print and resume_print
2017-08-15 22:57:13 -05:00
Tannoo
ab2ac1af71
UBL_LCD_storage_corrections ( #7517 )
...
Correcting the storage selection.
Also EEPROM error handling on the LCD.
2017-08-15 21:01:11 -05:00
cdedwards
f1843211e6
Fix for G26 spam output
...
while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.
2017-08-15 17:04:53 -06:00
Roxy-3D
be5ca34215
Allow G29 to work correctly even if nozzle is off the mesh. ( #7512 )
...
* work around previous regressions...
2017-08-15 17:04:52 -05:00
Scott Lahteine
06541ec885
Merge pull request #7448 from thinkyhead/bf1_delta_fixes
...
Prevent damage if DELTA_HEIGHT is set badly
2017-08-15 16:35:09 -05:00
GMagician
e9c72978c7
Implement SERVO_DELAY as array
...
This modify give SERVO_DELAY x servo basis
2017-08-15 00:28:47 -05:00
Scott Lahteine
96ae53cf41
Use MOVE_SERVO macro where possible
2017-08-15 00:28:39 -05:00
Scott Lahteine
3be9c19f12
Hold on move axis screens
2017-08-14 22:51:47 -05:00
Scott Lahteine
8fd58cd6dc
Patch goto labels for consistency
2017-08-14 22:51:47 -05:00
Scott Lahteine
75e6f72c89
Fix hexadecimal number formatting
2017-08-14 22:50:44 -05:00
Scott Lahteine
ac76101ec3
Eliminate goto in gcode_M48
2017-08-11 17:00:40 -05:00
Scott Lahteine
75e6ead5fd
Eliminate goto in gcode_G33
2017-08-11 17:00:40 -05:00
Scott Lahteine
6bd63d27b5
Updates to G29 for probe error handling
2017-08-11 17:00:40 -05:00
Thomas Moore
f54e0fc90f
Prevent damage if DELTA_HEIGHT is incorrect
2017-08-11 16:09:14 -05:00
Scott Lahteine
0938c62b48
Neater position_is_reachable call
2017-08-11 15:55:32 -05:00
Scott Lahteine
9d95b1b4df
Tweak Conditionals_post.h
2017-08-11 15:55:32 -05:00
Scott Lahteine
35d5a7bdff
Tweak CR-10 config/pins
2017-08-11 15:55:31 -05:00
Scott Lahteine
419c8969a7
Merge pull request #7479 from thinkyhead/bf1_fix_italian
...
Fix Italian string length
2017-08-10 18:42:35 -05:00
Frederik Kemner
25a11cd485
Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 ( #7480 )
2017-08-10 16:53:04 -05:00
Scott Lahteine
7f3406d47b
Fix Italian string length
...
Addressing #7264
2017-08-10 15:41:35 -05:00
etagle
2864ef8c7f
Slight improvement to the line parsing logic, saving 8 cycles per character
2017-08-08 02:57:55 -03:00
etagle
534bbb81ff
Adding XON/XOFF and STATISTICS implementation
2017-08-08 02:46:37 -03:00
etagle
3e5485de92
Enforcing requirements so XON/XOFF software handshake works and no drops of data are experienced while transferring data to an SD Card. I tested this with a CH340 USB to serial adapter (quite typical) at baudrates as high as 1000000 on a Atmega2560 running at 16Mhz, with no problems at all. We need a 1024 byte RX buffer. Less than that and we will have drops, higher than that is not needed
2017-08-08 02:30:04 -03:00
etagle
9e147e9ac4
Adding XON/XOFF and STATISTICS configuration settings and proper documentation on their usage for serial port
2017-08-08 02:22:33 -03:00
etagle
8ab2e420f6
Adding separate RX_BUFFER_SIZE configuration setting and proper documentation on its usage
2017-08-08 02:18:42 -03:00
etagle
b4c53af07d
Adding a new macro to be able to determine if a given integer value is a power of 2
2017-08-08 02:09:50 -03:00
Jozsef Kiraly
97c21e9007
Support for Geeetech GT2560 Rev.A/Rev.A+
2017-08-06 00:42:54 -05:00
Scott Lahteine
b2822a59f9
Add a sanity check for valid bed size
2017-08-05 03:49:04 -05:00
Scott Lahteine
a7e5c1bf19
Use float to init TMC2133 steps-per-mm
2017-08-05 03:48:52 -05:00
Scott Lahteine
dd66d21749
Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check
...
As proposed in #7429
2017-08-05 03:48:52 -05:00
richarddeweerd
b370906031
Example config for Geeetech I3 Pro X with GT2560 controller
2017-08-05 03:48:52 -05:00
Scott Lahteine
804818b4d9
Bring configs up to date
2017-08-05 03:48:52 -05:00
Scott Lahteine
dd841a3675
Merge pull request #7410 from benlye/user-script-feedback
...
Make audible user script feedback optional
2017-08-05 02:59:56 -05:00
Florian Heilmann
0fd2923a9f
Fix compilation with ADVANCED_PAUSE_FEATURE without SDSUPPORT ( #7412 )
...
* Fix compilation of ADVANCED_PAUSE_FEATURE without SDSUPPORT
* Fix Identation
* Make use of IS_SD_PRINTING macro
as per @MagoKimbra
2017-08-05 02:58:38 -05:00
benlye
24af9e1bf4
Make audible user script feedback optional
...
Add a parameter to enable/disable audible user script feedback
2017-08-04 17:24:10 +01:00
Florian Heilmann
6827a162bb
Update language_de.h
...
Add
MSG_BLTOUCH
MSG_DELTA_SETTINGS
MSG_UBL_MESH_EDIT
MSG_UBL_OUTPUT_MAP_BACKUP
MSG_UBL_STEP_BY_STEP_MENU
MSG_Z_FADE_HEIGHT
2017-08-04 09:35:21 +02:00
