MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,195 Commits 1 Branch 0 Tags 96 MiB
e9d374dd54
Commit Graph

7590 Commits

Author SHA1 Message Date
Scott Lahteine
64029ef8a6
Merge pull request #8179 from thinkyhead/bf1_config_tweak 
[1.1.x] Faster menu navigation for Anet A8
 2017-11-03 03:59:21 -05:00
Scott Lahteine
524f4ee0cf Tweak to M330 thermal protection 2017-11-03 03:57:11 -05:00
Scott Lahteine
34aeaec553 Remove ADKey steps acceleration 2017-11-03 03:42:52 -05:00
Luc Van Daele
0e4b6b373d [1.1.x] G33 magic numbers (#8173) 
* [1.1.x] G33 magic numbers

* oops

* comments

* oops

* warning

* better comment section

* remarks

* extra grids
 2017-11-03 03:35:53 -05:00
Scott Lahteine
193a0e9273
pid_autotune parity with 2.0.x 2017-11-03 03:26:47 -05:00
Rowan Meara
39cc36d3f1 [1.1.x] M303 thermal runaway protection (#8209) 
* Added M303 thermal runaway protection

Currently, thermal runaway protection is not available during M303.
Therefore, if someone plugs the thermistors in incorrectly and goes to
autotune their printer, the printer temperature could runaway and damage
could occur.

* Replace removed line, clarifying its logic
 2017-11-03 03:16:39 -05:00
Scott Lahteine
87d3a1ae4d
Merge pull request #8228 from tcm0116/1.0.x-dual_stepper 
[1.1.x] Fix automatic stepper assignment for X/Y/Z dual stepper drivers
 2017-11-03 03:08:43 -05:00
AnHardt
dcd7949544 Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR 2017-11-03 04:45:13 +01:00
Thomas Moore
277eb16d67 Fix automatic stepper assignment for X/Y/Z dual stepper drivers 2017-11-02 18:50:25 -05:00
jmdearras
c9980c0a5c Restore MKS_GEN_L 
Removed by accident, I presume, when the file was cleaned up
 2017-11-02 12:14:54 -04:00
jmdearras
3e9504d306 Fix case light "off" function (#8205) 
* Fix case light "off" function

It would only turn the light off if brightness was 255

* Update Marlin_main.cpp
 2017-11-01 21:17:23 -05:00
Scott Lahteine
4bf0e15653 Allow asterisks in G-Code commands 
Addressing #6655
 2017-10-31 21:14:56 -05:00
Scott Lahteine
f02ca2a9a3 Organize boards.h by architecture 2017-10-31 16:12:07 -05:00
Scott Lahteine
4fb3ce4739 Support for SilverGate Board 2017-10-31 15:26:27 -05:00
Scott Lahteine
704640bf98 Faster menu navigation for Anet A8 
Addressing #8166
 2017-10-31 14:44:48 -05:00
Scott Lahteine
db6de76acb Only show custom bootscreen once 2017-10-31 01:52:35 -05:00
GMagician
15be1cb9a9 [1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour (#8177) 
* [1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour

NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed

* Update Marlin_main.cpp

* Update Marlin_main.cpp

* Update Marlin_main.cpp
 2017-10-30 22:50:50 -05:00
Scott Lahteine
893092ff7f Kinematic clamp_to_software_endstops 2017-10-30 16:24:45 -05:00
Scott Lahteine
8b7c1e9cec Fix for MAX_VFAT_ENTRIES sanity check 2017-10-30 16:24:45 -05:00
Scott Lahteine
393ceb28fc The plural of 'axis' is 'axes' 2017-10-30 14:49:51 -05:00
Scott Lahteine
d9cb7be444
Merge pull request #8160 from thinkyhead/bf1_fixup_sd_reprint 
[1.1.x] Simplify SD_REPRINT_LAST_SELECTED_FILE
 2017-10-29 23:57:44 -05:00
Scott Lahteine
5837f067cf Tweak to QUICK_HOME comment 2017-10-29 23:50:02 -05:00
Scott Lahteine
5e5a177934 No hacks needed for SD_REPRINT_LAST_SELECTED_FILE 2017-10-29 22:44:03 -05:00
Scott Lahteine
0b5b03d9dc Tweak for soft endstops 2017-10-29 20:16:22 -05:00
Scott Lahteine
9288d80613
Merge pull request #8156 from thinkyhead/bf1_anet_10_servo 
[1.1.x] Define a default SERVO0_PIN for Anet 1.0
 2017-10-29 19:53:49 -05:00
Scott Lahteine
6698db29de
Update LCD draw condition 2017-10-29 19:17:32 -05:00
Scott Lahteine
25e86a520d
Merge pull request #8114 from thinkyhead/bf1_print_sd_file_again 
[1.1.x] Cleanup for SD Print Again
 2017-10-29 19:09:34 -05:00
Scott Lahteine
b0e282a74b Cleanups for SD_REPRINT_LAST_SELECTED_FILE 2017-10-29 19:02:17 -05:00
Scott Lahteine
46ed54cd8e Include time scale in some planner vars 2017-10-29 18:48:14 -05:00
Scott Lahteine
9c870baf84 Add a hidden 8s watchdog option for easier debugging 2017-10-29 18:34:57 -05:00
Scott Lahteine
471c2b5d5c Provide a default SERVO0_PIN for Anet 1.0 2017-10-29 18:34:57 -05:00
Scott Lahteine
e792c2b234 Followup to #8123 - to match 2.0.x changes 2017-10-29 05:39:44 -05:00
Scott Lahteine
daa85f71e1
Merge pull request #8123 from thinkyhead/bf1_dual_xyz_endstops 
[1.1.x] Dual endstops XYZ
 2017-10-29 04:36:09 -05:00
Rowan Meara
9850ba0cbd [1.1.x] Fix M303 thermal protection #8103 (#8126) 
* Fixed M303 thermal protection

The temperature sanity checking logic was not being applied during M303
(pid autotuning) because instead of setting a target temperature, it
directly manipulated the pwm values.  When PIDTEMP/PIDTEMPBED is
enabled, PWM values rather than the target temperature determine whether
the heater is on.  I changed this to look directly at the PWM amount
when pid is enabled.

* Turn off heaters on M303 error

Currently, PID autotuning stops if it overshoots the temperature by 20C
or if if the temperature does not change for 20 minutes and it times
out.  I added calls to disable the heaters in these scenarios.

* Removed unnecessary if statement.

Added changes suggested by GMagician.

* Update temperature.cpp

* Update temperature.cpp

* Update temperature.cpp
 2017-10-29 04:34:47 -05:00
Scott Lahteine
318c419f77 Implement support for Dual X and Y endstops 2017-10-29 03:49:45 -05:00
Scott Lahteine
7e1232269a Add Dual Steppers / Endstops to configs 2017-10-29 03:49:45 -05:00
Scott Lahteine
62d52d62dc Cleanup for DIGIPOTS settings 2017-10-29 03:49:32 -05:00
LVD-AC
77cf42588f (1.1.x) serious bug G33 2017-10-29 00:22:55 +02:00
Scott Lahteine
a979c428ee Revert default BABYSTEP_MULTIPLICATOR to 1 2017-10-27 19:42:51 -05:00
jmdearras
6920769a9a Added MKS GEN L board (#8088) 
[1.1.x] Add MKS GEN L board
 2017-10-27 02:13:41 -05:00
Scott Lahteine
410aa0716d Concise SD_REPRINT_LAST_SELECTED_FILE description 2017-10-27 00:10:04 -05:00
Scott Lahteine
445a7f65cd Clean up trailing whitespace 2017-10-27 00:02:35 -05:00
Luc Van Daele
e64cfb13b8 (1.1.x) auto tune calibration parameters (#8031) 
* auto tune calibration parameters

* solve warnings

* Tweaks to formatting

* review Thinkyhead

* Error
 2017-10-26 23:49:20 -05:00
Scott Lahteine
2296d98845 Tweak neopixel self-test 2017-10-26 22:46:11 -05:00
Scott Lahteine
9aac3d8773 Add some Polish translations 
Thanks @SCiunczyk
 2017-10-26 22:44:23 -05:00
Scott Lahteine
6569b9ba56 Fix FWRETRACT logic, apply common sense 2017-10-26 22:36:41 -05:00
Bob-the-Kuhn
7ab9abe4ef Merge pull request #8107 from Bob-the-Kuhn/1.1.x-reduced-font-fix 
(bug fix) 1.1.x - save 1400 bytes of FLASH by using reduced font for some languages
 2017-10-26 16:09:52 -05:00
Bob-the-Kuhn
3357170b18 give this language an unique name 2017-10-26 15:48:00 -05:00
Roxy-3D
2e746f2b8b Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE (#8104) 
* Initial conflict resolution

All previous items resolved:
- Use of ELAPSED() on timer code
- Switch to use of defer_return_to_status=true as much as possible
- Update & Clean Up of Max7219 routines

* Resolve non-SD case in ultralcd.cpp
 2017-10-26 11:44:55 -05:00
Bob-the-Kuhn
594c075377 1.1.x - save 1400 bytes of FLASH by using reduced font for some languages (#8095) 
* use reduced sized font for some languages

* Fit Portuguese language files to existing scheme

* Rename language_pl-DOGM.h to language_pl_utf8.h

* Rename language_pl_utf8.h to language_pl-DOGM.h

* Update dogm_font_data_ISO10646_1.h

* Update dogm_font_data_ISO10646_1.h
 2017-10-25 18:32:38 -05:00
Scott Lahteine
8bb1e91afd More specific M100 description 2017-10-25 16:11:09 -05:00
Scott Lahteine
a12d1b21b5 Merge pull request #8048 from madmo/mks-mini-gt2560 
[1.1.x] Add MKS MINI 12864 support to GT2560
 2017-10-25 01:13:07 -05:00
Scott Lahteine
5bed2f351a Fix spacing, use single instances of similar pins 2017-10-24 19:12:40 -05:00
Scott Lahteine
ec9d7b639d Encourage users to re-examine their configs 2017-10-24 18:33:31 -05:00
Scott Lahteine
1c97c1582c Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h 2017-10-24 18:25:50 -05:00
Scott Lahteine
f06f4b40b8 Apply physical limits to mesh bounds 2017-10-24 16:49:00 -05:00
Scott Lahteine
3235beef6d Merge pull request #8073 from thinkyhead/bf1_fix_M600 
[1.1.x] Fix position sync in M600 pause/resume
 2017-10-24 14:56:01 -05:00
Scott Lahteine
e5ab783b08 Merge pull request #8061 from thinkyhead/bf1_general_cleanup 
[1.1.x] Patch up some verbiage in configs
 2017-10-24 14:44:31 -05:00
Scott Lahteine
355ebec92d Fix position sync in M600 pause/resume 2017-10-24 14:41:54 -05:00
montri2025
fa157f08ff lcd <20 disply Bed Temperature cast ty (#8068) 2017-10-23 23:46:26 -05:00
Scott Lahteine
39a545b3f8 Patch up some verbiage in configs 2017-10-22 17:14:50 -05:00
Roxy-3D
e9bc9a2ab4 change to better (more clear) names (#8049) 
set_destination_to_current() changed to set_destination_from_current()

set_current_to_destination() changed to set_current_from_destination()
 2017-10-21 10:58:17 -05:00
Moritz Bitsch
b22c87183f Add MKS MINI 12864 support for GT2560 2017-10-21 13:05:21 +02:00
tweichselbaumer
fa44130734 Add M290 babystepping (#8014) 
* Add M290 babystepping

* Allow `Z` for `M290`

* fix spacing

* Support BABYSTEP_XY in M290

* Not just Z

* Extend M290 for BABYSTEP_ZPROBE_OFFSET

* tweak
 2017-10-21 03:58:53 -05:00
MetalSearch
9b3f27f02a Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041) 
[1.1.x] Fix EndStops don't work with BOARD_RAMPS_14_EFB on Micromake C1
 2017-10-21 00:24:22 -05:00
Scott Lahteine
a7398a0459 Prevent SDCARD_SORT_ALPHA from exploding 2017-10-20 19:14:11 -05:00
Scott Lahteine
91c5c2538a Add SCROLL_LONG_FILENAMES advanced option 
Based on #7637 by @marcio-ao
 2017-10-20 19:14:10 -05:00
Scott Lahteine
259cf1b0b2 BQ enables this in the config. Remove here 2017-10-18 23:23:56 -05:00
Scott Lahteine
2338632270 Simplify Cartesian probing bounds 
Followup to #8011
 2017-10-18 17:16:14 -05:00
Luc Van Daele
2a88a3fd33 boolval revised (#8017) 2017-10-18 14:19:01 -05:00
Thomas Moore
84470f6b2a Update UBL mesh boundaries to accomidate beds centered at 0, 0 (#8011) 2017-10-18 10:03:00 -05:00
studiodyne
e04902f589 Add EXTRA_FAN_SPEED feature 2017-10-16 02:32:30 -05:00
Scott Lahteine
d63d08ef8b Merge pull request #7948 from gallynero/patch-1 
Enable change feedrate in delta
 2017-10-15 16:28:45 -05:00
Scott Lahteine
5c2ff6ed19 Add Capability BUILD_PERCENT 2017-10-15 03:01:36 -05:00
Scott Lahteine
5f708d47ce Add LCD_SET_PROGRESS_MANUALLY 2017-10-15 02:21:09 -05:00
Scott Lahteine
3b4b9c6d68 Unaccented French for Character Display 2017-10-14 20:17:29 -05:00
MetalSearch
8df47d76c7 Add control board MAKEBOARD Mini 
+Add French language without accent for japanese LCD
 2017-10-14 20:10:03 -05:00
Scott Lahteine
be55a49946 Merge pull request #7980 from thinkyhead/bf1_granular_sw_endstops 
[1.1.x] Software endstop options by axis
 2017-10-14 17:37:35 -05:00
Scott Lahteine
e05af35678 Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs 2017-10-14 17:14:19 -05:00
Scott Lahteine
060d16d26b Split the software endstop capability by axis. 
Based on #7975 and #7979
 2017-10-14 17:14:08 -05:00
Scott Lahteine
e17869ca20 Fix Emergency Parser 
Followup to #7459
 2017-10-14 15:58:07 -05:00
Scott Lahteine
662105c1b6 ADC sensor fix inspired by 'Evgen2' on Twitter 2017-10-14 02:39:13 -05:00
Scott Lahteine
b8ddae61e2 ubl_state no longer needed 2017-10-14 02:39:13 -05:00
Scott Lahteine
ece14af556 Improve LCD leveling value edits 2017-10-14 02:39:13 -05:00
Scott Lahteine
b07a2aa23c Add HAS_MESH conditional 2017-10-14 02:39:12 -05:00
Scott Lahteine
88857e8028 Move fade_scaling_factor_for_z to Planner 2017-10-14 02:10:46 -05:00
Scott Lahteine
8e808fcadc General cleanup, apply const 2017-10-13 16:13:36 -05:00
Scott Lahteine
da93a272a0 Move leveling_is_active to a macro 2017-10-13 16:11:27 -05:00
Scott Lahteine
3d5b10735f Remove obsolete UBL z_offset 2017-10-13 08:23:01 -05:00
gallynero
94228d4522 Enable change feedrate in delta 
Enable change the relative feedrate on a printing job in delta machines with UBL
 2017-10-12 01:55:51 +02:00
Slawomir Ciunczyk
167058b61f Different NEOPIXEL types 
Changes to support NEOPIXEL LED strips
- Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h
- ability to setup startup brightness
- ability to define sequential/non-sequential transition of color change during heating-up
- additional parameter to M150 P<brightness>
 2017-10-10 01:58:40 -05:00
Scott Lahteine
f835245ee1 Merge pull request #7908 from thinkyhead/bf1_goodbye_legacy_advance 
[1.1.x] Remove legacy ADVANCE feature
 2017-10-10 00:31:39 -05:00
Scott Lahteine
38110e220d Segmented manual moves for kinematics 2017-10-09 23:10:17 -05:00
deram
9239fcf0da Allow UBL G29 and G26 to build without a probe 2017-10-09 18:37:53 -05:00
Scott Lahteine
381ebc043f Add support for ST7565-64128N 
Based on #7447 by @Bob-the-Kuhn
 2017-10-09 17:39:03 -05:00
jmdearras
c7e0a49c94 Add some new LCD displays 
- Original CR-10
- MKS Mini Display
 2017-10-09 17:39:03 -05:00
Scott Lahteine
067622fcc6 Apply some tweaks based on 2.0.x 2017-10-09 17:39:03 -05:00
Scott Lahteine
ae256576e1 Bring configs into parity with 2.0.x 2017-10-09 17:38:39 -05:00
Scott Lahteine
cbfcce09fa Remove legacy ADVANCE feature 2017-10-09 04:27:45 -05:00
Scott Lahteine
a21201a713 LCD filename already concatentated 2017-10-07 15:14:58 -05:00
Scott Lahteine
53f2f188f2 LCD filename already concatenated 2017-10-07 15:11:28 -05:00
Scott Lahteine
a6e95c7d25 Fix display issue with SD_ALPHA_SORT caching 2017-10-07 15:07:05 -05:00
Dave Johnson
97e6663bb3 [1.1.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled (#7878) 
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled

If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print.  Saves 60 bytes PROGMEM.
add HD44780 too

* Reduce lines used

* Reduce lines used
 2017-10-07 15:00:56 -05:00
Scott Lahteine
e2ceb1b800 Merge pull request #7632 from GMagician/Wrong-sanitycheck-message-fix 
Addressing #7612
 2017-10-07 02:25:35 -05:00
Scott Lahteine
8c93295d62 Merge pull request #7873 from thinkyhead/bf1_anet_encoder_pulses 
[1.1.x] Fixing ANET encoder pulses
 2017-10-07 01:21:14 -05:00
Phr3d13
c26242a553 Fixing #7833 2017-10-07 00:07:24 -05:00
Scott Lahteine
dac5f20a01 Patch SD file draw bug 2017-10-06 23:53:08 -05:00
Scott Lahteine
b211fa4e1f Remove extra NEWPANEL settings in Conditionals_LCD.h 2017-10-06 17:23:32 -05:00
LVD-AC
355cba4aa7 Fixes for G33 2017-10-06 15:52:53 -05:00
Scott Lahteine
e287e14354 Tweak spacing in utf8_mapper.h 2017-10-06 15:11:27 -05:00
Scott Lahteine
5e63ba970d Merge pull request #7862 from thinkyhead/bf1_mapper_c2c3c4_sk 
[1.1.x] Added Slovak C2C3C4 mapper implementation.
 2017-10-06 14:56:26 -05:00
Roman Moravčík
2a46ab288e Added Slovak C2C3C4 mapper implementation. 2017-10-06 14:40:15 -05:00
Scott Lahteine
7999249a5c Set TEMP_SENSOR_0 to 1 in CR-10 example config 
As pointed out in #7692 by @totalitarian
 2017-10-06 14:29:00 -05:00
Scott Lahteine
0ec9a7f090 Fix xon_xoff_state initialization 2017-10-04 12:10:15 -05:00
Scott Lahteine
a47c5c093d Merge pull request #7459 from ejtagle/xon-xoff-sdxfer 
[1.1.x] XON/XOFF serial handshake (for faster transfers to SD)
 2017-10-02 23:52:41 -05:00
Scott Lahteine
bcb8722513 Fix DUAL_X_CARRIAGE manual move 
Addressing #7745
 2017-10-02 23:28:52 -05:00
Scott Lahteine
4c34b3ad9c Stop redundant E4_IS_TMC2130 current control 2017-10-02 23:10:34 -05:00
Scott Lahteine
1b8b5c4b06 Make prepare_move_to_destination_dualx a full move function 2017-10-02 23:10:18 -05:00
Scott Lahteine
4e19ff75b6 XON/XOFF corrections, tweaks, formatting, etc. 2017-10-02 03:52:42 -05:00
Scott Lahteine
94caabf89a Add XON/XOFF options to example configs 2017-10-02 03:52:41 -05:00
Scott Lahteine
f365448338 Merge pull request #7811 from thinkyhead/bf1_fix_resume_print 
[1.1.x] Fix broken M600 resume_print
 2017-10-01 22:54:34 -05:00
GMagician
8ab426c3a4 Updated all examples configurations 
Forgot to update examples configurations. Done now
 2017-10-01 21:04:12 -05:00
GMagician
33d28c24bf Implementing [FR] #7548 
Added new configuration to inhibit XYZ movements when home is not done
 2017-10-01 21:02:42 -05:00
Scott Lahteine
ac70048945 Only MarlinConfig.h ahead of feature block 2017-10-01 20:55:14 -05:00
MasterPIC
40a4a716e1 Fix filament change bug in resume_print 
Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion.

Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position.
So the extrusion step is mixed with the movement required to go back to the printing position.

The provided code seems to be working but probably a better fix is required.
 2017-10-01 18:42:29 -05:00
Scott Lahteine
802f147686 Remove some excess whitepsace 2017-10-01 18:25:04 -05:00
Scott Lahteine
80a0f935a1 Fix G10-G11 by adding a synchronize 
Based on #7792 by @tcm0116
 2017-09-30 17:46:31 -05:00
MasterPIC
7f8ff0a724 Show leveling status on character LCD 2017-09-27 12:18:41 -05:00
Scott Lahteine
723a34d9c7 Add confirmation to Init EEPROM command 2017-09-27 11:27:47 -05:00
Scott Lahteine
2efd5b119d Add USER_SCRIPT_RETURN option 2017-09-27 11:23:34 -05:00
Scott Lahteine
b105e47cb5 Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled 
Based on #7769
 2017-09-27 10:39:44 -05:00
DecoyPlatypus
41dcbe89dd Fixed ST7920_DELAY typo 
Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3
 2017-09-27 03:01:09 -05:00
DecoyPlatypus
70a64355f6 Fixed LCD_FOR_MELZI SanityCheck 
Sanity Check for LCD_FOR_MELZI  would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.
 2017-09-27 03:01:09 -05:00
Scott Lahteine
e37a1ded0d Increase BABYSTEP_MULTIPLICATOR to 100 
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
 2017-09-27 00:14:26 -05:00
Scott Lahteine
3e28243076 No need for LCD_PINS_Dn when unused 2017-09-27 00:12:20 -05:00
Scott Lahteine
bbb94b8f68 babystepping tweak 2017-09-27 00:12:20 -05:00
Scott Lahteine
a277b43e30 Fix babystep menu display 2017-09-27 00:12:20 -05:00
Scott Lahteine
8a994fb1b1 Fix encoder pulses for G3D_PANEL 2017-09-27 00:12:20 -05:00
Scott Lahteine
ac2ac99e15 Fix bad logic in autostart 
As pointed out by @marcio-ao in #7638
 2017-09-24 17:52:35 -05:00
Scott Lahteine
c1cc79176c Full-featured Creality configs 2017-09-24 16:52:42 -05:00
Scott Lahteine
f25dccd6d1 Disable BABYSTEP_XY by default in all configs 2017-09-24 16:52:42 -05:00
Scott Lahteine
cd09a83cfa Add size note to SDSORT_LIMIT 2017-09-24 16:52:41 -05:00
Scott Lahteine
9bbc2df217 General code cleanup, spacing 2017-09-24 16:52:41 -05:00
Luc Van Daele
74d430cb97 matrix names update (#7697) 
* matrix names update

* symplified names

* new angle normalization

* ABC

* axis

* least squares

* recalc_delta_settings

* endstop_adj

* 0p

* bug
 2017-09-24 01:45:31 -05:00
Scott Lahteine
9d4d53e2fd Update links to old wiki page 2017-09-23 22:06:45 -05:00
Scott Lahteine
00896f1713 Fix LEVEL_BED_CORNERS (No leveling required) 2017-09-23 22:00:45 -05:00
Scott Lahteine
c3a9e95a5f Define drawmenu items once, in ultralcd.cpp 2017-09-23 22:00:45 -05:00
Scott Lahteine
0afd25a010 Fix caselight compile issues 2017-09-23 22:00:44 -05:00
GMagician
5b87843fae Addressing #7612 
Replaced extruder with hotend
 2017-09-07 19:07:36 +02:00
Scott Lahteine
386b74f8c2 Merge pull request #7593 from marcio-ao/bugfix-1.1.x 
Added option for graphical overlay for Z-offset (Resubmission of #7350 and #7586)
 2017-09-02 00:01:38 -05:00
Tannoo
2a963fb5d1 UBL LCD Bugfixes (#7598) 2017-09-01 16:59:06 -05:00
Marcio Teixeira
d69c5317df Added option for graphical overlay for Z-offset 2017-08-31 14:21:39 -06:00
Scott Lahteine
367e1b54ba Merge pull request #7591 from thinkyhead/bf1_misc_patches 
M111: no args reports current flags
 2017-08-31 15:19:29 -05:00
Scott Lahteine
8a184a526a Marlin: Patch G33, allow M111 to give status 2017-08-31 14:35:00 -05:00
Scott Lahteine
353c23b16e Enforce BED_CENTER_AT_0_0 on Delta, SCARA 2017-08-31 14:34:59 -05:00
Scott Lahteine
898f48e331 CNC workspace planes for G5 
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
 2017-08-31 14:29:29 -05:00
Scott Lahteine
5851c2d36f MAX7219 followup (#7564) 
* Add MAX7219_DEBUG to Travis CI testing

* Tweak config and use standard pin naming for MAX7219_DEBUG

* MAX7219: Apply coding standards, use macros, etc.

* Make code work...
 2017-08-31 11:44:43 -05:00
Scott Lahteine
52073f21c5 Merge pull request #7556 from thinkyhead/bf1_slovak_language 
Slovak UTF-8 translation
 2017-08-27 21:05:53 -05:00
Scott Lahteine
321f98f867 Fix servo delay in Folgertech config 2017-08-27 20:53:27 -05:00
jneilliii
36771e9492 Fixes required for Creality CR-10 2017-08-27 20:39:16 -05:00
Roxy-3D
3f0b38ed5d Add Max7219 LED Matrix Debug Support (#7563) 
* Add Max7219 LED Matrix Debug Support

The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.

The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.

* Try to keep Makefile up to date.
 2017-08-25 17:03:07 -05:00
GMagician
0067bb2840 Addressing #7552 
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
 2017-08-25 03:23:16 -05:00
Scott Lahteine
2b12093589 Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben 
New feature: Part-Cooling Fan Multiplexer
 2017-08-25 03:16:40 -05:00
Michal Holes
54d48130f3 Slovak UTF-8 translation 
Slovak UTF-8 translation
 2017-08-23 19:14:35 -05:00
Scott Lahteine
86c024ce98 Organize, document pins.h include lines 2017-08-23 18:33:00 -05:00
Scott Lahteine
c7b07d20f2 Minor patches to pins files 2017-08-23 18:32:59 -05:00
Scott Lahteine
356af7dcb0 Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
Scott Lahteine
11a724d8fc Sanguinololu example configuration 2017-08-23 18:32:59 -05:00
Scott Lahteine
e337df2e98 Miscellaneous tweaks to serial outputs, code cleanups 2017-08-23 18:32:58 -05:00
Vben
c0409b85e7 New feature: Part-Cooling Fan Multiplexer 2017-08-18 15:59:04 -05:00
Scott Lahteine
e82e9073d6 Merge pull request #7530 from GMagician/Code-reduction 
Code reduction with some configurations
 2017-08-18 13:57:59 -05:00
GMagician
6127154af3 Fix identation by tab 
There was a tab instead of spaces
 2017-08-18 11:34:55 +02:00
GMagician
b94a1c6b9f Code reduction this some configurations 
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
 2017-08-18 11:11:00 +02:00
GMagician
405a2132f3 #7529 compile fix 
I made an error in previous fix
 2017-08-17 22:04:28 +02:00
GMagician
869d7f3703 #7504 missing part 
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
 2017-08-17 21:43:47 +02:00
Scott Lahteine
101ba70517 Merge pull request #7505 from thinkyhead/bf1_anet_1_pio 
Add Anet 1.0 to Platformio.ini
 2017-08-17 00:33:20 -05:00
Vben
4817b39d98 Added new feature for AutoParking Extruder (APE) 2017-08-16 17:33:11 -05:00
Scott Lahteine
6772e33ef6 Use [XY]_CENTER for error correction 
Followup to #7512
 2017-08-16 16:13:09 -05:00
Scott Lahteine
385f1bb9e5 Merge pull request #7504 from thinkyhead/bf1_servo_delays 
Individual servo delays
 2017-08-16 16:05:22 -05:00
Scott Lahteine
2a31c9f2ce Merge pull request #7515 from cdedwards/bugfix-1.1.x 
Fix for G26 spam output
 2017-08-16 16:01:10 -05:00
MTrab
5fa61c0ad3 Add Anet 1.0 to Platformio.ini 
Added env:anet10 to platformio.ini for easy compile and upload to this board
 2017-08-16 15:59:20 -05:00
Scott Lahteine
b3f59ec945 Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16 
Add "Level Corners" menu item
 2017-08-16 15:58:15 -05:00
Tannoo
b33739d493 UBL_Language_Update (#7520) 
* UBL_Language_Update

Translatable strings

* Use slightly better wording...

* Use slightly better wording...
 2017-08-16 09:49:04 -05:00
Scott Lahteine
a1878cd1c0 Add "Level Corners" menu option 2017-08-16 02:54:33 -05:00
Scott Lahteine
0a18fb735e Use "PSU" label to fit on screen 2017-08-16 02:51:00 -05:00
Scott Lahteine
30887feae3 Tweak some formatting in ABL G29 2017-08-16 02:51:00 -05:00
Thomas Moore
257b693ab0 Advanced pause fixes (#7518) 
* Disallow filament change while paused

* Use kinematic movemements in pause_print and resume_print
 2017-08-15 22:57:13 -05:00
Tannoo
ab2ac1af71 UBL_LCD_storage_corrections (#7517) 
Correcting the storage selection.
Also EEPROM error handling on the LCD.
 2017-08-15 21:01:11 -05:00
cdedwards
f1843211e6 Fix for G26 spam output 
while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.
 2017-08-15 17:04:53 -06:00
Roxy-3D
be5ca34215 Allow G29 to work correctly even if nozzle is off the mesh. (#7512) 
* work around previous regressions...
 2017-08-15 17:04:52 -05:00
Scott Lahteine
06541ec885 Merge pull request #7448 from thinkyhead/bf1_delta_fixes 
Prevent damage if DELTA_HEIGHT is set badly
 2017-08-15 16:35:09 -05:00
GMagician
e9c72978c7 Implement SERVO_DELAY as array 
This modify give SERVO_DELAY x servo basis
 2017-08-15 00:28:47 -05:00
Scott Lahteine
96ae53cf41 Use MOVE_SERVO macro where possible 2017-08-15 00:28:39 -05:00
Scott Lahteine
3be9c19f12 Hold on move axis screens 2017-08-14 22:51:47 -05:00
Scott Lahteine
8fd58cd6dc Patch goto labels for consistency 2017-08-14 22:51:47 -05:00
Scott Lahteine
75e6f72c89 Fix hexadecimal number formatting 2017-08-14 22:50:44 -05:00
Scott Lahteine
ac76101ec3 Eliminate goto in gcode_M48 2017-08-11 17:00:40 -05:00
Scott Lahteine
75e6ead5fd Eliminate goto in gcode_G33 2017-08-11 17:00:40 -05:00
Scott Lahteine
6bd63d27b5 Updates to G29 for probe error handling 2017-08-11 17:00:40 -05:00
Thomas Moore
f54e0fc90f Prevent damage if DELTA_HEIGHT is incorrect 2017-08-11 16:09:14 -05:00
Scott Lahteine
0938c62b48 Neater position_is_reachable call 2017-08-11 15:55:32 -05:00
Scott Lahteine
9d95b1b4df Tweak Conditionals_post.h 2017-08-11 15:55:32 -05:00
Scott Lahteine
35d5a7bdff Tweak CR-10 config/pins 2017-08-11 15:55:31 -05:00
Scott Lahteine
419c8969a7 Merge pull request #7479 from thinkyhead/bf1_fix_italian 
Fix Italian string length
 2017-08-10 18:42:35 -05:00
Frederik Kemner
25a11cd485 Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 (#7480) 2017-08-10 16:53:04 -05:00
Scott Lahteine
7f3406d47b Fix Italian string length 
Addressing #7264
 2017-08-10 15:41:35 -05:00
etagle
2864ef8c7f Slight improvement to the line parsing logic, saving 8 cycles per character 2017-08-08 02:57:55 -03:00
etagle
534bbb81ff Adding XON/XOFF and STATISTICS implementation 2017-08-08 02:46:37 -03:00
etagle
3e5485de92 Enforcing requirements so XON/XOFF software handshake works and no drops of data are experienced while transferring data to an SD Card. I tested this with a CH340 USB to serial adapter (quite typical) at baudrates as high as 1000000 on a Atmega2560 running at 16Mhz, with no problems at all. We need a 1024 byte RX buffer. Less than that and we will have drops, higher than that is not needed 2017-08-08 02:30:04 -03:00
etagle
9e147e9ac4 Adding XON/XOFF and STATISTICS configuration settings and proper documentation on their usage for serial port 2017-08-08 02:22:33 -03:00
etagle
8ab2e420f6 Adding separate RX_BUFFER_SIZE configuration setting and proper documentation on its usage 2017-08-08 02:18:42 -03:00
etagle
b4c53af07d Adding a new macro to be able to determine if a given integer value is a power of 2 2017-08-08 02:09:50 -03:00
Jozsef Kiraly
97c21e9007 Support for Geeetech GT2560 Rev.A/Rev.A+ 2017-08-06 00:42:54 -05:00
Scott Lahteine
b2822a59f9 Add a sanity check for valid bed size 2017-08-05 03:49:04 -05:00
Scott Lahteine
a7e5c1bf19 Use float to init TMC2133 steps-per-mm 2017-08-05 03:48:52 -05:00
Scott Lahteine
dd66d21749 Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check 
As proposed in #7429
 2017-08-05 03:48:52 -05:00
richarddeweerd
b370906031 Example config for Geeetech I3 Pro X with GT2560 controller 2017-08-05 03:48:52 -05:00
Scott Lahteine
804818b4d9 Bring configs up to date 2017-08-05 03:48:52 -05:00
Scott Lahteine
dd841a3675 Merge pull request #7410 from benlye/user-script-feedback 
Make audible user script feedback optional
 2017-08-05 02:59:56 -05:00
Florian Heilmann
0fd2923a9f Fix compilation with ADVANCED_PAUSE_FEATURE without SDSUPPORT (#7412) 
* Fix compilation of ADVANCED_PAUSE_FEATURE without SDSUPPORT

* Fix Identation

* Make use of IS_SD_PRINTING macro

as per @MagoKimbra
 2017-08-05 02:58:38 -05:00
benlye
24af9e1bf4 Make audible user script feedback optional 
Add a parameter to enable/disable audible user script feedback
 2017-08-04 17:24:10 +01:00
Florian Heilmann
6827a162bb Update language_de.h 
Add
MSG_BLTOUCH                    
MSG_DELTA_SETTINGS            
MSG_UBL_MESH_EDIT                
MSG_UBL_OUTPUT_MAP_BACKUP        
MSG_UBL_STEP_BY_STEP_MENU       
MSG_Z_FADE_HEIGHT
 2017-08-04 09:35:21 +02:00
Scott Lahteine
3497153cf1 Followup cleanup patch 
Fix regression in #7428
 2017-08-03 14:55:22 -05:00
Scott Lahteine
16f8c4865a Merge pull request #7409 from FHeilmann/bf_update_ru_translation 
Update Russian Translation
 2017-08-03 14:54:40 -05:00
Scott Lahteine
622048ffb0 Clean up whitespace, trailing space, bad tab conversion, etc. 2017-08-03 11:20:03 -05:00
Roxy-3D
2cbdc0ebb6 Fix large Z corrections when nozzle moves off of UBL mesh (#7415) 2017-08-02 16:51:04 -05:00
Florian Heilmann
650e5274c4 Update Russian Translation 2017-08-02 21:19:15 +02:00
Scott Lahteine
ce65c13a97 Merge pull request #7398 from fiveangle/bf_lcd_bed_level_requirements 
Clarify LCD_BED_LEVELING requirements
 2017-08-01 17:46:07 -05:00
Dave Johnson
936dfb965c Clarify LCD_BED_LEVELING requirements 
LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled.  See #7396
 2017-08-01 14:13:54 -07:00
Kai
ffe3013bb5 Fix for #7395 
Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395
 2017-08-01 21:45:41 +02:00
Øystein Krog
e948f77cf9 Fix DUAL_X_CARRIAGE not moving at all 
Axis would only move when homing.
Bug introduced in 91841d75c9.
Fixes #6956, fixes #7050 and fixes #7291
 2017-07-31 18:44:26 +02:00
Scott Lahteine
08b0456d91 Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor 
Manual Bed Leveling: Goto previous Z height at each probe point
 2017-07-30 05:41:12 -05:00
teemuatlut
936d00dda8 Implement probing delay for piezo sensors 2017-07-29 21:46:40 -05:00
Scott Lahteine
29eef360d0 Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv 
Fixes for FWRETRACT
 2017-07-29 21:20:19 -05:00
Wilfried Chauveau
894608f8a3 Manual Bed Leveling: Goto previous Z height at each probe point 2017-07-29 21:15:37 -05:00
Scott Lahteine
ff06e1a030 Merge pull request #7372 from tcm0116/delta_calib_menu 
Move Delta Calibration menu to the Prepare menu
 2017-07-29 21:05:03 -05:00
Thomas Moore
15e009b6ca Move Delta Calibration menu to the Prepare menu 2017-07-28 08:33:18 -05:00
Scott Lahteine
bfd396c13a Patch to fix some compiler warnings 2017-07-28 02:27:16 -05:00
Scott Lahteine
48c5f3dddf Tweak kill action #ifdef 2017-07-27 23:42:01 -05:00
Scott Lahteine
be7a9a07c5 Don't reset grid with G29 Q + PROBE_MANUALLY 2017-07-27 22:47:43 -05:00
Scott Lahteine
dfe670247d Merge pull request #7363 from marcio-ao/bugfix-1.1.x 
Makefile fixes and U8G support.
 2017-07-27 21:31:56 -05:00
Marcio Teixeira
af83c512b8 Added support for U8G. 2017-07-27 07:49:25 -06:00
Scott Lahteine
4eff18854b Rename options with swap_ prefix 2017-07-27 04:14:29 -05:00
Scott Lahteine
14482d2f2a Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo 2017-07-27 04:14:29 -05:00
Scott Lahteine
9fc72422e4 Don't let the flow multiplier affect retract/recover length 2017-07-27 04:14:29 -05:00
Scott Lahteine
fee696db5d Improve retract() for G10/G11/autoretract 2017-07-27 04:14:29 -05:00
Scott Lahteine
423b0f3a1e Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT 2017-07-27 04:14:29 -05:00
Scott Lahteine
51864fd365 Add bed size as a configuration option 2017-07-26 23:04:54 -05:00
Scott Lahteine
dc7c95e07b Remove @ section fwretract 2017-07-26 22:46:16 -05:00
Dave Johnson
4718c09c48 Remove extraneous USBCON defines for AT90USB boards 
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h.  Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
 2017-07-23 16:41:48 -07:00
C. Scott Ananian
890e7a16a9 Add support for Printrbot Neopixel RGBW strip. 
Connected as described at http://printrbot.com/shop/led-strip/

Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
 2017-07-22 16:07:55 -05:00
Scott Lahteine
a059e95463 Bring Infitary i3 config up to date 2017-07-21 20:49:19 -05:00
Scott Lahteine
d6d6043548 Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin 
MKS 1.3+: Add pin mapping for PS_ON
 2017-07-21 20:00:26 -05:00
Alexey Shvetsov
851f9f5399 Update Russian translation - Part 1 
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
 2017-07-21 19:32:37 -05:00
Scott Lahteine
b7a16e4468 Merge pull request #7315 from fixoid/patch-1 
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
 2017-07-21 19:10:54 -05:00
Alexey Shvetsov
f38b8c5bf8 MKS 1.3+: Add pin mapping for PS_ON 
This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4).

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
 2017-07-21 18:50:05 -05:00
Scott Lahteine
8a3bc6be4d Improve FWRETRACT config options and commentary 
Add more details as requested in #7198
 2017-07-20 22:57:50 -05:00
Scott Lahteine
b0173ccdb9 Drop extra initializers for vars initialized by EEPROM code 2017-07-20 22:57:49 -05:00
Scott Lahteine
7afafb05b8 Split G10/G11 into separate functions 2017-07-20 02:24:13 -05:00
Scott Lahteine
c45798694f Add some more requirements to the G-code list 2017-07-20 02:24:13 -05:00
Scott Lahteine
72de280c1e BARICUDA valve pressure consistently uint8_t 2017-07-20 02:21:40 -05:00
Scott Lahteine
4d98e3f0a7 General cleanup 2017-07-20 02:21:40 -05:00
fixoid
e530c67349 Fixing SWITCHING_EXTRUDER feature 2017-07-19 21:15:26 +03:00
Tannoo
2ad3ca5d8a Bugfix (#7310) 2017-07-18 22:55:14 -05:00
Roxy-3D
37a6833d7e Allow the sampled point to be added into the Least Squares Best Fit (#7289) 
Without this...  The LSF won't work because none of the sampled points
in this code block get added.
 2017-07-13 16:33:02 -05:00
C. Scott Ananian
a519b093b9 Fix build by replacing qr_solve by least_squares_fit. (#7285) 
This was broken by 9af67e2446.
 2017-07-13 12:02:15 -05:00
Scott Lahteine
0873c667fa Apply coding standards to recent merges 2017-07-13 00:46:16 -05:00
Scott Lahteine
8c2907d10f Fix ABL broken by recent change 2017-07-12 22:56:18 -05:00
Roxy-3D
9af67e2446 Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR (#7276) 
We can save more and a pile of RAM by eleminating the eqnBVector and
EqnAMatrix arrays next.
 2017-07-10 19:05:11 -05:00
Scott Lahteine
76e90b93b7 Volatile keyword not needed for parser.seen 2017-07-10 15:38:54 -05:00
Jamie Bainbridge
00e4ced58e Stay in User Menu after command. Add feedback. 
When a user executes a User Menu command, the LCD returns to the main menu. If the user has multiple menu items they want to run, such as one menu item per bed leveling corner, then it's better to stay in the User Menu rather than return to the main menu.

This PR modifies Marlin to stay in the User Menu after a command.
 2017-07-10 13:47:12 -05:00
Scott Lahteine
1066b17457 Merge pull request #7260 from thinkyhead/bf_G33_update_27 
Updates to G33 and its LCD code
 2017-07-10 13:39:36 -05:00
Tannoo
e927941c06 Bugfix (#7265) 
Fix compile error when UBL is enabled but there is no LCD Panel.
 2017-07-08 09:44:50 -05:00
Scott Lahteine
68aea9c01d Merge pull request #7261 from thinkyhead/bf_configs_by_vendor 
Arrange more example configs by vendor
 2017-07-07 15:46:22 -05:00
Tannoo
aaacef9441 Corrections (#7231) 
20x4 map integration.    Also some minor changes to the UBL Menu layout.     Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.
 2017-07-07 11:05:08 -05:00
LVD-AC
4bc79ec877 Updates for G33-LCD interface 2017-07-07 05:00:59 -05:00
Scott Lahteine
186580b55f Arrange example configurations by vendor 2017-07-07 04:48:23 -05:00
Scott Lahteine
6be369f3ea Add some config names to AUTHOR 2017-07-07 04:46:33 -05:00
Scott Lahteine
7fc31a7940 Merge pull request #7258 from thinkyhead/bf_cleanups_jbrazio 
Add support for BQ heated bed kit with Hephestos 2
 2017-07-07 04:11:07 -05:00
Scott Lahteine
11e376e920 Merge pull request #7256 from thinkyhead/bf_cleanup_july_6 
Assign -1 to LCD_PINS_D4-7 if not defined
 2017-07-07 03:22:47 -05:00
João Brázio
2065591daf Add support for BQ heated bed kit with Hephestos 2 2017-07-07 03:10:38 -05:00
essgcee
61be28133d Support for Creality CR-10 
Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)
 2017-07-06 23:08:10 -05:00
Scott Lahteine
9248a90a4c Assign -1 to LCD_PINS_D4-7 if not defined 2017-07-06 22:47:51 -05:00
Scott Lahteine
5ef1e5ef60 Tweaks for M43 2017-07-06 21:47:50 -05:00
Scott Lahteine
c7732db99d Fix: Use of digitalRead, digitalWrite breaks on AT90USB 2017-07-06 21:25:56 -05:00
Scott Lahteine
f713f25fa5 Clean up excess whitespace 2017-07-06 21:24:30 -05:00
Scott Lahteine
fc9ce65095 Add BUSY_WHILE_HEATING for hosts that need it 2017-07-06 16:28:57 -05:00
Scott Lahteine
c6d430670a Clear SHOW_BOOTSCREEN with no LCD 2017-07-06 14:21:27 -05:00
Scott Lahteine
11c589c3ec Fix compile issue with G38 
Fixes #7250
 2017-07-06 14:21:27 -05:00
Scott Lahteine
678914be25 Patch M23 to work around Simplify3D bug 
Addressing #7227
 2017-07-06 14:00:58 -05:00
LVD-AC
3efe4aeef8 Add PROBE_MANUALLY support to G33 2017-07-04 18:06:54 -05:00
Scott Lahteine
cca1cca3a5 Merge pull request #7237 from thinkyhead/bf_cz_mapper 
UTF-8 mapper for Czech
 2017-07-04 16:45:13 -05:00
Scott Lahteine
a2babb532d Merge pull request #7217 from benlye/add-kill-action 
Add configurable action command to send when printer is killed
 2017-07-04 16:44:08 -05:00
Petr Zahradník
8c34233452 UTF-8 mapper for Czech 2017-07-04 15:51:23 -05:00
Dave Johnson
20f6676d63 DISABLE_[XYZ] compatibility check 
DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING
 2017-07-03 17:23:53 -07:00
Ben Lye
c28749a567 Add kill action 
Sends pre-defined string as action command when printer is kill.
 2017-07-03 23:45:19 +01:00
Scott Lahteine
df87278fce Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output 2017-07-03 15:59:06 -05:00
Scott Lahteine
4be8d7720e Fix spelling of "Chinese" 2017-07-03 15:24:49 -05:00
LVD-AC
567941e341 Fix for issues #6997 and #7152 
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
 2017-07-03 02:53:49 -05:00
Scott Lahteine
57fff2e95e Merge pull request #7219 from thinkyhead/bf_update_git_scripts 
Update Marlin+git helper scripts
 2017-07-03 01:49:27 -05:00
Scott Lahteine
6a3967ee33 Corrections for probe_pt parameters 2017-07-03 01:34:27 -05:00
Scott Lahteine
534bffa7a9 Correct comment on ABL G29 2017-07-03 01:13:07 -05:00
Scott Lahteine
e1e1a0c344 Provide a default CUSTOM_BOOTSCREEN_TIMEOUT 2017-07-03 01:13:07 -05:00
Scott Lahteine
69297b2d7b Make all EEPROM optimization options available 2017-07-02 20:47:03 -05:00
Scott Lahteine
d609489b22 Drop setup_homepin 2017-07-02 02:27:09 -05:00
Scott Lahteine
167169e1bf Sanity check for a real probe with M48 2017-07-02 02:27:09 -05:00
Scott Lahteine
395a9f59ac Merge pull request #7211 from thinkyhead/bf_lcd_bootscreen 
Use lcd_bootscreen for both
 2017-07-02 02:11:07 -05:00
Scott Lahteine
14663efe0d Merge pull request #7210 from fiveangle/printrboard_revf_cleanup 
Printrboard RevF cleanup
 2017-07-02 01:02:26 -05:00
Scott Lahteine
ae5923a3d0 Make lcd_bootscreen common to both 2017-07-02 00:47:36 -05:00
Scott Lahteine
859248433f Patch for gcode debug 2017-07-02 00:47:35 -05:00
Dave Johnson
09c90c2f6c Printrboard RevF Cleanup 
-Update Arduino IDE extension descriptions
-Set default motor currents if not defined in Configuration_adv.h
-Support for MINIPANEL LCD
-Support for choosing internal or panel SD
 2017-07-01 22:33:39 -07:00
Scott Lahteine
232a10410d LCD_FOR_MELZI 2017-07-01 22:32:20 -05:00
Scott Lahteine
76c92a1fab Clean up some trailing spaces 2017-07-01 22:32:20 -05:00
Scott Lahteine
cf96109056 Implement the EEPROM_CHITCHAT option 2017-07-01 21:48:18 -05:00
Scott Lahteine
dcec7178d1 Expose DISABLE_M503 option as a test option 2017-07-01 21:31:28 -05:00
Scott Lahteine
3e78a01262 Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd 
UBL radar map corrections
 2017-07-01 20:59:03 -05:00
Tom
1ff7d10c80 Add configuration for Infitary M508 (i3 clone) 
Based on Infitary's own firmware settings.
 2017-07-01 20:04:08 -05:00
Scott Lahteine
4cb45c10dd Patch ubl lcd mesh map indentation 2017-07-01 19:47:52 -05:00
Scott Lahteine
abd6ba62b4 Some cleanups for ubl lcd mesh map 2017-07-01 19:47:49 -05:00
Scott Lahteine
f17bae1f70 Changes for ubl_lcd_map_control patch 2017-07-01 19:47:02 -05:00
Tannoo
8e0f3b7eba UBL radar map corrections 2017-07-01 19:00:44 -05:00
Bob-the-Kuhn
fcceed5be6 intermittent Teensy & G26 compile problem 
===============================================

also an issue with ubl_motion.cpp
 2017-07-01 14:41:24 -05:00
Scott Lahteine
30b327d24c Finish the solution for #7166 2017-06-29 15:17:39 -05:00
Scott Lahteine
6c97c5595c Add a sanity check for DELTA_AUTO_CALIBRATION 2017-06-29 15:03:19 -05:00
Bob-the-Kuhn
e6e3132f79 make LETTTER_OFF return values that match param indices range 2017-06-29 09:01:58 -05:00
Bob-the-Kuhn
bfbf5f8200 correct value_bool() when FASTER_GCODE_PARSER is enabled 
Also corrected compile issue when DEBUG_GCODE_PARSER and
AUTO_BED_LEVELING_UBL are both enabled.
 2017-06-28 19:51:08 -05:00
Scott Lahteine
406ef69702 Move Anet A8 config to subfolder 2017-06-28 16:58:57 -05:00
Scott Lahteine
379926961c Add Anet A6 config, edit Anet A8 config 2017-06-28 16:58:57 -05:00
Scott Lahteine
5b03f23fa2 Bring configurations up to date, fix some comments 2017-06-28 16:41:49 -05:00
Scott Lahteine
e3cedfa0ec Fix a compiler warning 2017-06-28 16:41:46 -05:00
Scott Lahteine
bb0508b6cf Fix comment in M115 code 2017-06-28 13:08:33 -05:00
Scott Lahteine
85777a56c6 Add A (action) and E (echo) parameters to M118 2017-06-28 02:07:59 -05:00
Scott Lahteine
d1e8d4cd9d Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update 
UBL Map Cleanup and LCD display
 2017-06-28 01:20:22 -05:00
Scott Lahteine
b492e0878d Changes to reduce and simplify 2017-06-28 01:10:30 -05:00
Ben Lye
98d362c2da Adding M118 command to send text to serial 
Allows the user to send text to the serial console in order to
communicate with a host - sending debuging information or action
commands, for example.  Text must begin with '//' and this is added if
it is not already present at the beginning of the string.
 2017-06-28 00:55:20 -05:00
Tannoo
80abc872f3 Updated to better support the coming "radar" 2017-06-27 22:51:58 -05:00
Tannoo
e90cbf5c16 UBL Map Cleanup 2017-06-27 22:51:58 -05:00
Scott Lahteine
fc140c4962 Followup for I2C_POSITION_ENCODERS 2017-06-27 20:46:40 -05:00
Scott Lahteine
f4246dc8ff Merge pull request #7165 from thinkyhead/bf_parser_shorthand 
Use parser.seenval, add shorthand functions
 2017-06-27 18:57:48 -05:00
Scott Lahteine
bd776df8c1 Optimize seen_axis by moving 'X' to index 24 2017-06-27 18:47:11 -05:00
Scott Lahteine
05449cf6ee Add shorthand value accessors to gcode.h 2017-06-27 18:39:41 -05:00
Scott Lahteine
12f092c812 Cleanups to gcode.h, use seenval() 2017-06-27 17:57:00 -05:00
Scott Lahteine
941943c167 Apply const, spacing, etc. 2017-06-27 05:23:49 -05:00
Scott Lahteine
5b11b33854 Add support for Průša MK2 Multiplexer 2017-06-27 04:55:30 -05:00
Scott Lahteine
a4a587a897 Fix spelling of Průša 2017-06-27 04:46:46 -05:00
Scott Lahteine
ba1706a265 Fix spacing in gcode.cpp 
Followup to #6940
 2017-06-27 04:46:46 -05:00
Scott Lahteine
c2c8aafda2 Merge pull request #7157 from thinkyhead/bf_g33_f_parameter 
G33 F and Height bug fix
 2017-06-27 04:36:22 -05:00
Scott Lahteine
627afb29df Merge pull request #7109 from tnw513/fix-italian 
added missing italian translation
 2017-06-27 04:12:30 -05:00
Scott Lahteine
f0f9fb7465 Remove line that does nothing 2017-06-27 04:08:50 -05:00
LVD-AC
99592c8458 Update G33: Add F, fix height bug 2017-06-27 04:02:02 -05:00
Ben Lye
31514f453a Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug 
Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries
to enumerate pins 46 and 47 (which don't exist) because `#ifdef
AVR_AT90USB1286_FAMILY ` doesn't work as expected.
 2017-06-27 08:04:40 +01:00
Scott Lahteine
134116b874 Merge pull request #7153 from thinkyhead/bf_czech_update 
Updated Czech language
 2017-06-26 17:34:15 -05:00
Petr Zahradník
e80958b631 CZ Translate BLTouch and UBL 
Fixup length
 2017-06-26 16:15:31 -05:00
Scott Lahteine
fe7e890b09 Fix issues with ADC_KEYPAD 
Fixes #7150
 2017-06-26 16:08:31 -05:00
dot-bob
a1632cfa0a Added option 'H' to G29 P4. 
- Added `H` to set a nozzle height adjustment to surface of the bed.
- Updated G29 P4 comments to reflect changes.
 2017-06-25 17:14:08 -05:00
Scott Lahteine
e687782875 Merge pull request #7134 from thinkyhead/bf_skynet_a3_ready 
Add Skynet/ANET A10 support
 2017-06-25 14:35:22 -05:00
dot-bob
b3c36c98fd Edit digipot currents via LCD, save to EEPROM 2017-06-25 01:02:36 -05:00
Scott Lahteine
3c7bfe798d Various cleanups ahead of digipot save 2017-06-24 23:56:24 -05:00
Bob-the-Kuhn
9651d01e1a Add Skynet/ANET A10 support 2017-06-24 19:07:03 -05:00
Scott Lahteine
eb314373bb Config spacing & consistency, group custom LCDs 2017-06-24 14:33:40 -05:00
Scott Lahteine
6c45fa7dcc Apply #elif in LCD conditionals 2017-06-24 13:56:33 -05:00
Scott Lahteine
afbc6e3e2f Update DELTA/SCARA config comments 2017-06-24 12:47:17 -05:00
Paweł Stawicki
1e47c17b46 Fix: set digipot mcp4018 Vrefmax to 1.666V 2017-06-24 12:35:34 -05:00
Scott Lahteine
80a232419d CNC workspace planes and 'P' argument for G2/G3 2017-06-23 14:53:03 -05:00
Scott Lahteine
5fb0d401eb Formatting tweaks 2017-06-23 14:53:02 -05:00
Scott Lahteine
ed04d0b6be Label DualXMode enums 2017-06-23 14:53:02 -05:00
Scott Lahteine
786cdea124 Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined 2017-06-23 14:53:01 -05:00
Scott Lahteine
ee7163fd3a Fix pinsDebug compile errors 2017-06-23 14:53:01 -05:00
Scott Lahteine
a9f8e518bf Fix FILAMENT_WIDTH_SENSOR infinite loop issue 
Addressing #6992 and #5851
 2017-06-23 14:53:01 -05:00
Scott Lahteine
254a11b083 Merge pull request #7120 from thinkyhead/bf_sainsmart_link 
Add link to F. Malpartida LiquidCrystal library
 2017-06-22 14:04:23 -05:00
Scott Lahteine
aeb6d465a4 Merge pull request #7118 from thinkyhead/bf_french_update 
French update
 2017-06-22 13:10:07 -05:00
Bob-the-Kuhn
325f09ea6c Add link to custom LiquidCrystal library by F. Malpartida 2017-06-22 13:07:08 -05:00
MagoKimbra
d26c8cc5c8 fix_planner_refresh_e_positioning (#7103) 
* fix_planner_refresh_e_positioning

* Fix
 2017-06-22 12:59:22 -05:00
Gege2B
c7f04fbcc7 French translation 2017-06-22 12:49:23 -05:00
Silvio Didonna
4171520729 added missing italian translation 2017-06-21 11:08:39 +02:00
Bob-the-Kuhn
41bfff14e2 Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping 
Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check
 2017-06-20 16:36:22 -05:00
Scott Lahteine
424d0bae8b Merge pull request #7100 from thinkyhead/bf_HAL_prepare 
Apply maths macros and type changes ahead of HAL
 2017-06-20 01:15:23 -05:00
Scott Lahteine
5c59ee4e93 Use current (raw) Z if omitted from G29 WXY or G29 WIJ. 2017-06-20 00:10:52 -05:00
Scott Lahteine
37bc0fce62 Make G29 compatible with M206 Z and G92 Z 
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.

To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.

What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
 2017-06-20 00:09:59 -05:00
Scott Lahteine
6c45d0fd81 Apply maths macros and type changes ahead of HAL 2017-06-19 22:57:42 -05:00
Scott Lahteine
8a51e2960c Improve the experience of editing steps_per_mm 2017-06-19 22:17:15 -05:00
Scott Lahteine
725d9d9a56 Fix and improve LCD value editing display 
- Fix: When "100.0" changes to "99.0" the LCD shows "199.0"
- Use 2 rows if needed on character LCD, (allowing longer labels…
Germany, et. al.)
- Known issue: A certain length label combined with a certain value
drawing function could, for example, display 99.0 on 1 line, but 100.0
on two lines. Workaround would be to pass a nominal value size argument.
 2017-06-19 22:17:15 -05:00
Scott Lahteine
499bb85a95 Clean up, put ubl menu itemization closer at hand 2017-06-19 22:17:14 -05:00
Tannoo
90f5f82926 Step-by-Step Menu addition 2017-06-19 20:15:11 -05:00
Scott Lahteine
0c616700f3 Merge pull request #7097 from thinkyhead/bf_dac_percents_fix 
Convert DAC percent to uint8_t
 2017-06-19 17:58:55 -05:00
Florian Heilmann
6dcf42f1a7 Add Z Fade Height to M420 output if it is enabled (#7042) 
* Add Z Fade Height to M420 Output

Echo the z-fade height when M420 is called, if it is enabled.

* Fix Whitespace

* Fix Compiler complaint

* Missing semi-colon
 2017-06-19 17:53:07 -05:00
Bob-the-Kuhn
a1c65fd3d5 convert DAC percent to uint8_t 
=====================

add test to Travis
 2017-06-19 17:46:41 -05:00
Scott Lahteine
907cafcbfd Support for two switching extruders 2017-06-19 17:20:59 -05:00
Ross Allan
cfcd069501 Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0 2017-06-19 14:02:17 -05:00
Scott Lahteine
b8b7ef1902 Merge pull request #7090 from thinkyhead/bf_italian_refix 
Fix Italian language mapper
 2017-06-19 09:27:13 -05:00
Scott Lahteine
42f7f9e013 Merge pull request #7060 from bgort/i2cpefix 
I2C Position Encoders Example Configs
 2017-06-19 01:08:42 -05:00
Scott Lahteine
0b49bddec2 Fix Italian language mapper 2017-06-19 01:01:40 -05:00
Silvio Didonna
2e26a7c752 Added missing Italian translations 2017-06-18 23:37:48 -05:00
Scott Lahteine
4c3dc8bf07 Remove set_current_to_destination from resume_print 
Addressing #7057
 2017-06-18 23:01:13 -05:00
Scott Lahteine
4857a3ba48 Formatting and spelling 2017-06-18 23:01:12 -05:00
Thomas Moore
3d24c329af M600 fixes 2017-06-18 23:00:56 -05:00
Bob-the-Kuhn
8fb30aaed6 warn user of an invalid combination 2017-06-17 15:04:47 -05:00
Bob-the-Kuhn
6cb9bb27fe Move lcd_refresh_zprobe_zoffset definition 2017-06-16 21:46:33 -05:00
Scott Lahteine
d4270f15a9 Spacing tweak in setup() 2017-06-16 14:21:05 -05:00
Scott Lahteine
c61c0a9aeb Fix status message missing "blink" 2017-06-16 14:18:19 -05:00
Scott Lahteine
062131554f Followup to #7045 2017-06-16 14:18:19 -05:00
Jim Brown
3d043976f7 Add option to disallow filament change without homing first 2017-06-16 13:32:17 -05:00
Scott Lahteine
93da4e83f7 One more space on a short status message 2017-06-16 12:58:25 -05:00
Scott Lahteine
7c95f762f2 Show LCD bed options even without thermal protection 2017-06-15 15:29:56 -05:00
Scott Lahteine
92eb55f246 Reject generous donation of trailing whitespace 2017-06-15 15:25:24 -05:00
Scott Lahteine
428be27893 Formatting adjustments 2017-06-15 15:25:24 -05:00
Scott Lahteine
8d5a37fb3d Support for a 5th stepper in stepper code 2017-06-15 15:25:23 -05:00
Scott Lahteine
7769a22064 Tweaks to temperature code 2017-06-15 15:25:23 -05:00
Scott Lahteine
d9da126776 Cleanups for UBL / ultralcd.cpp 2017-06-15 15:22:36 -05:00
Scott Lahteine
499d5c3b24 Fix scrolling lcd message for DOGM 2017-06-15 15:07:39 -05:00
Scott Lahteine
7164fd499e Tweak to G33 P error 2017-06-15 14:43:40 -05:00
Scott Lahteine
c10d763d98 Simpler prepare move conditions 2017-06-15 14:43:40 -05:00
Scott Lahteine
4ebff8eaa5 Drop fastio timer cruft 2017-06-15 14:43:40 -05:00
Scott Lahteine
09bc34f4dc Allow arbitrarily long retraction 2017-06-15 14:43:30 -05:00
Scott Lahteine
4414825e0d Merge pull request #7038 from thinkyhead/bf_PCA9632 
PCA9632 PWM color LED support
 2017-06-15 14:41:24 -05:00
Bob-the-Kuhn
9dda022705 fix compile errors 
================================

Changed to conditional compile for AT90USB issue
 2017-06-15 13:18:14 -05:00
Bob-the-Kuhn
b3338ccb01 Merge pull request #6954 from Bob-the-Kuhn/Software-SPI-for-all-CPUs 
SD card soft SPI - allow all CPU families to use it
 2017-06-15 01:03:39 -05:00
Brian
40bb0cbf7a example configurations, etc. 2017-06-14 18:04:28 -04:00
Jim Brown
26d20ebcfc Don't allow filament change without homing first (#7054) 2017-06-13 17:11:37 -05:00
Roxy-3D
824f71d503 LCD Panel Interactive Mesh Editing (#7045) 
Original Mesh Bed Leveling replacement put at top of UBL Menu Options to
help facilitate the removal of the Original Mesh Bed Leveling.

Radar display (and control) of the UBL Interactive Mesh Editing.
 2017-06-12 18:26:49 -05:00
Scott Lahteine
445227c807 Fix missing LCD_STR_REFRESH 2017-06-12 01:28:52 -05:00
Scott Lahteine
699aa35df6 Code cleanup for G33 2017-06-12 01:25:40 -05:00
dot-bob
0bc66bf22c PCA9632 PWM color LED support 
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
 2017-06-12 01:09:24 -05:00
Luc Van Daele
896dfa0577 G33 eccentric probe fixes (#6850) 
* excentric probe config fix

* undo last commit

* eccentric probe fix

* oops

* !stow after each probe

* deploy/stow fix

* E parameter + bit of cleanup

* comment

* LCD menu fix
 2017-06-12 01:07:19 -05:00
Thomas Moore
e47029199e Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF (#7000) 
* Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF

* Add HEATER_IDLE_HANDLER conditional
 2017-06-12 00:22:31 -05:00
Scott Lahteine
8326c1c279 Merge pull request #7005 from Diederikvanderpant/bugfix-1.1.x 
added shift register pins for reprapworld keypad v1.1
 2017-06-11 23:12:11 -05:00
Scott Lahteine
07f8da36d2 CL-260 configs 2017-06-11 19:40:13 -05:00
Scott Lahteine
dce665a083 Merge pull request #7025 from magnuspub/patch-1 
Mod in language_it.h
 2017-06-11 19:09:46 -05:00
Scott Lahteine
7b09ab6bda Merge pull request #7033 from Bob-the-Kuhn/pinsDebug-&-dac_mcp4728-fixes 
Fix pinsDebug problem & add capability to display more than 70 pins
 2017-06-11 19:09:09 -05:00
Scott Lahteine
5bdb4bbc5e Merge pull request #7030 from thinkyhead/bf_circular_scroll 
Circular scrolling of the status message
 2017-06-11 19:07:38 -05:00
Federico
772275ab0c Create language_it.h 2017-06-11 10:37:34 +02:00
Bob-the-Kuhn
11e28f389e fix pinsDebug.h error, add capability to display more than 70 pins. 2017-06-10 22:01:15 -05:00
Scott Lahteine
21217d53df Circular scrolling of the status message 2017-06-10 20:56:00 -05:00
Scott Lahteine
da8e946efb Reduce size of heater state print code 2017-06-10 20:26:17 -05:00
Scott Lahteine
dde8bb7c8b Fix extrude_min_temp compiler warning 2017-06-10 20:07:36 -05:00
Scott Lahteine
83263076dc Merge pull request #7014 from fiveangle/fix_get-set_DrvPct_declarations 
fix get/setDrvPct declarations
 2017-06-10 19:06:50 -05:00
Scott Lahteine
57a51fd5db Tweak some else clauses 2017-06-10 16:40:10 -05:00
Scott Lahteine
fc89de6d8b Followup to German language update 2017-06-10 16:27:39 -05:00
Federico
92011e3d8c Create language_it.h 2017-06-10 21:50:14 +02:00
Dave Johnson
7864b133a8 Fix get/setDrvPct declarations 2017-06-09 20:21:28 -07:00
Scott Lahteine
0b6b7c9c7e Merge pull request #7013 from thinkyhead/bf_german_update 
Update language_de.h
 2017-06-09 21:41:19 -05:00
Scott Lahteine
f17a3c2474 Merge pull request #6889 from thinkyhead/bf_at90usb_mapping 
Unify all AVR90USB pin mappings
 2017-06-09 21:00:13 -05:00
Kai
5a72b6818e update language_de.h 
Following #6990 some more translations and some grammar fixes
 2017-06-09 19:45:09 -05:00
Scott Lahteine
4cc5444144 Merge pull request #7008 from Bob-the-Kuhn/Z_MIN_PROBE_ENDSTOP-and-Z_MAX_PIN 
Can't use "#define Z_MIN_PROBE_PIN Z_MAX_PIN" in configuration.h
 2017-06-09 19:42:56 -05:00
Scott Lahteine
51bc50214a Save 8 bytes of SRAM 2017-06-09 19:20:16 -05:00
Scott Lahteine
748bf32388 Unify AVR90USB: pinsDebug changes 2017-06-09 19:20:16 -05:00
Scott Lahteine
5426fc1735 Unify AVR90USB: Pins cleanup 2017-06-09 18:48:12 -05:00
Scott Lahteine
87d8223251 Unify AVR90USB: Pins remap to Arduino 2017-06-09 18:48:12 -05:00
Scott Lahteine
b378deaf89 Unify AVR90USB: fastio changes 2017-06-09 18:21:57 -05:00
Scott Lahteine
e94f79ccea Patch some serial macros 2017-06-09 17:17:23 -05:00
Scott Lahteine
d91710e9aa Followup for UBL translated strings 2017-06-09 16:59:26 -05:00
Scott Lahteine
761df686bd Minor cleanup in gcode.h 2017-06-09 16:59:26 -05:00
Thomas Moore
897bc2ac1f Updates for ensure_safe_temperature (#6963) 
* Updates for ensure_safe_temperature

* M600 fixes
 2017-06-09 15:19:08 -05:00
Bob-the-Kuhn
1c107b3949 delete problem line 2017-06-09 11:53:36 -05:00
Diederik van der Pant
5b270417ed added shift register pins for reprapworld keypad v1.1 
I recently upgraded my Marlin to V1.1.x and decided to publish my fix to make marlin compile properly when #define board megatronics 2 in combination with #define reprapworld keypad v1.1. It was previously described in the comments of a closed pull request. MarlinFirmware#472. All the buttons on the keypad are now operational.
 2017-06-09 14:17:47 +02:00
bgort
2f55870edb [New Feature] I2C position encoder support (#6946) 
* [New Feature] I2C position encoder support

I plan to continue improving/cleaning this up, as there areas that need work.

* let the cleanups begin.

* progress

* more progress

* comments, rename files, etc.

* clean

* Cleanups per thinkyhead

* a few more cleanups

* cleanups, bugfixes, etc.

* remove unnecessary passes_test(), additional cleanups/optimizations

* cleanups

* misc.

* Fix up I2CPEM.init() and a few other things.

* organize, fix, rename, etc.

* more optimization

* a few more tweaks
 2017-06-09 08:06:23 -04:00
Bob-the-Kuhn
28d72f48f1 change to DWORD 2017-06-08 16:15:02 -05:00
Bob-the-Kuhn
8d1d9040b6 add static 2017-06-08 14:59:21 -05:00
Bob-the-Kuhn
a17ffe1ece Merge pull request #6985 from Kaibob2/patch-1 
Fix for #6980 (case_light compile problem when EXTENDED_CAPABILITIES_REPORT is enabled)
 2017-06-08 11:18:56 -05:00
Tannoo
731c8e6372 Translatable Strings for ubl_G29 (#6990) 2017-06-08 10:09:39 -05:00
Kai
abb6b8ad54 update language_de.h (#6986) 
There was quite a lot to translate this time. I'm not absolutely confident with the whole UBL stuff and it's a PITA to translate. I don't use any kind of levelling myself as i just have a perfectly level cast aluminium plate as bed.
So maybe someone who really uses it might take a closer look at it after it's merged.
 2017-06-08 10:04:52 -05:00
Kai
c2eff60d3f Fix for #6980 
Line 7830 prevented successfull compilation when #define CASE_LIGHT_ENABLE is uncommented
 2017-06-08 09:19:04 +02:00
Scott Lahteine
1419126721 Merge pull request #6965 from thinkyhead/bf_save_more_sram 
Use createChar_P to save SRAM in bootscreen
 2017-06-07 17:34:19 -05:00
Scott Lahteine
a453be7357 Merge pull request #6973 from bgort/autoreportT 
Enable AUTO_REPORT_TEMPERATURES by default
 2017-06-07 17:33:40 -05:00
Scott Lahteine
1d615e0a67 Merge pull request #6976 from Tannoo/Leveling_in_About_Printer 
Leveling type in About Printer
 2017-06-07 17:26:21 -05:00
Scott Lahteine
707707d71a Fix LCD status message padding 2017-06-07 16:07:38 -05:00
Scott Lahteine
e556ab1dff Find three-point leveling points on Delta 2017-06-07 16:07:38 -05:00
Scott Lahteine
a27b08e6af Various code style tweaks 2017-06-07 16:07:38 -05:00
Scott Lahteine
dac29e0f75 Cleaner failure of UBL without EEPROM 2017-06-07 16:07:38 -05:00
Scott Lahteine
9128d9ab45 Improve sanity checks with static_assert, organize 2017-06-07 16:07:38 -05:00
Scott Lahteine
6bb05c4543 Save 20b in smart_fill_mesh with PROGMEM 2017-06-07 16:07:38 -05:00
Scott Lahteine
b7dc4d9973 Save 92b PROGMEM, 14b SRAM with extruder auto fan 2017-06-07 16:07:38 -05:00
Scott Lahteine
c9e3caf928 Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C 2017-06-07 16:07:38 -05:00
Scott Lahteine
4134a6b526 Save 88b PROGMEM, 48 bytes SRAM in settings.reset 2017-06-07 16:07:38 -05:00
Scott Lahteine
36cc03a9b4 Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate 2017-06-07 16:07:38 -05:00
Scott Lahteine
2a41f0ff84 Save 28b PROGMEM in ultralcd.cpp (line_to_current) 2017-06-07 16:07:38 -05:00
Scott Lahteine
e6d10f6ddd Spend 48b PROGMEM to save 16b SRAM 
...by moving `homing_feedrate_mm_s` to PROGMEM.
 2017-06-07 16:07:38 -05:00
Scott Lahteine
97e13a30ba Save over 100 bytes SRAM in pin_is_protected 2017-06-07 16:07:38 -05:00
Scott Lahteine
45c74406cf Recover 32 bytes of SRAM in Marlin bootscreen code 2017-06-07 16:07:38 -05:00
Scott Lahteine
e1c5a43247 Cleanup stepper current control config options 2017-06-07 16:07:38 -05:00
Scott Lahteine
efc198f952 Spacing, const, comments 2017-06-07 16:07:38 -05:00
Scott Lahteine
4406fba994 Fixes #6975 2017-06-07 11:14:30 -05:00
Scott Lahteine
d28f5d8a78 Fix: z_endstop_adj is never initialized 2017-06-07 10:29:56 -05:00
Scott Lahteine
5d5ff36446 Fix a compile error with _lcd_set_z_fade_height 2017-06-07 10:29:56 -05:00
Tannoo
b88957e0d4 Leveling type in About Printer 
Show the Leveling system in use on the About Printer screen.
 2017-06-07 06:28:33 -06:00
Brian
dd071a4a65 Enable AUTO_REPORT_TEMPERATURES by default 2017-06-07 02:52:35 -04:00
bgort
8db1197c9b Enable extended capabilities report by default (#6969) 
Ref #5139
 2017-06-07 02:36:34 -04:00
bgort
82e662fc69 Remove requirement for LCD when UBL is used. (#6971) 
* Remove requirement for LCD when UBL is used.

* fix previous oversights

* further refinement - error messages for P2 & P4

* require R on G26 when not using LCD; default to all points
 2017-06-07 02:24:36 -04:00
Tannoo
2c2b991b59 UBL Manual Build Menu Option (#6972) 
One click option to manually build UBL mesh.
 2017-06-06 22:14:18 -05:00
Roxy-3D
0dd0033b33 Save up to 94 bytes of RAM on 20x4 LCD Display machines (#6964) 
* Save up to 94 bytes of RAM on 20x4 LCD Display machines

Moved the custom screen characters out of RAM into Program Memory.  With
SD-Card support and the Progress Bar enabled, this saves 94 bytes of RAM
memory.

This was tested using the example_configurations/FolgerTech-i3-2020
files.  So a couple small changes to those files snuck into this Pull
Request.

Probably...  We can find similar savings in the Graphics LCD code it we
comb through it.   And if so...  That is the place we really need to
save RAM memory!

* Tidy up white space and indentation
 2017-06-05 17:02:00 -05:00
Bob-the-Kuhn
ba0bd33c38 Removed check for 2560 family 2017-06-04 22:16:27 -05:00
Scott Lahteine
04b07a6ecc Unused var in Stepper 2017-06-04 17:25:16 -05:00
Scott Lahteine
eb8af486d2 Ensure safe temperature for M600 2017-06-04 17:25:16 -05:00
Scott Lahteine
bfe7fbe5c0 Maintain message scroll rate 2017-06-04 17:25:15 -05:00
Scott Lahteine
6411d65c48 Fix Morgan SCARA S2 calculation 2017-06-04 12:24:09 -05:00
Scott Lahteine
46752588b9 Merge pull request #6948 from Bob-the-Kuhn/redundant_temperature 
fix redefinition errors for redundant_temperature
 2017-06-04 12:16:09 -05:00
Scott Lahteine
5938dae200 Merge pull request #6950 from MagoKimbra/fix_g29_3_point 
Fix G29 with 3 point
 2017-06-04 12:15:44 -05:00
Scott Lahteine
c5e0f08e35 Merge pull request #6951 from fixoid/patch-4 
Initializing extruder/nozzle servo when turning on the printer
 2017-06-04 12:13:05 -05:00
Scott Lahteine
e4937b0285 Cleanup of spacing and formatting 2017-06-04 11:31:43 -05:00
fixoid
1aab9906e6 Initializing extruder/nozzle servo when when turning on the printer 2017-06-04 16:57:24 +03:00
MagoKimbra
663ff7f92a Fix G29 with 3 point 2017-06-04 14:39:31 +02:00
oldmcg
9f295581f0 Ubl delta fixes and improvements (#6941) 
* Change all direct changes of ubl.state.active to
  set_bed_leveling_enabled() which handles apply/unapply
  leveling to maintain current_position consistency.

Fix invalidation of UBL mesh to invalid unreachable
  mesh points as well (delta corners).

Fix UBL_DELTA unapply_leveling logic and when
it gets applied, including fade_height changes.

Add optional M114 D for detailed position information,
disabled from compilation by default (M114_DETAIL).

* UBL_DELTA raw and inline kinematics

* UBL planner fall through fix

* consistent variable names

* Cleanup orphaned code and whitespace changes.
Use _O2.

* compile warnings cleanup

* Remove redundant #ifdef condition
 2017-06-03 17:11:43 -05:00
Bob-the-Kuhn
c34d7a29a6 fix redefinition errors for redundant_temperature 
Removing redundant_temperature from public section and leaving it in the
private section
 2017-06-03 16:40:14 -05:00
Bob-the-Kuhn
6a5d3b580d fix "hex_address not defined" when UBL is enabled 2017-06-03 13:19:55 -05:00
Scott Lahteine
789b2928a8 Tweak scrolling message code 2017-06-02 23:45:53 -05:00
Scott Lahteine
fc7d7f87b4 Init probe test pin with FastIO 2017-06-02 23:45:52 -05:00
Scott Lahteine
0282452cea Make Parser::seen volatile 2017-06-02 23:45:52 -05:00
Scott Lahteine
9a305a467b Patch LCD Contrast menu item 2017-06-02 23:45:52 -05:00
Scott Lahteine
90ccac4bcf Clean up after recent commits 2017-06-02 23:45:52 -05:00
Bob-the-Kuhn
2130f10de8 allow space between parameter and value 2017-06-02 19:57:22 -05:00
Bob-the-Kuhn
ebda4663c3 for discusion 2017-06-02 19:42:43 -05:00
FATALHERMIT
911079104e Support for ZRIB v2.0 Control Board 2017-06-02 12:05:46 -05:00
Scott Lahteine
65a0212866 Easier override of FILWIDTH_PIN 2017-06-02 12:05:46 -05:00
Scott Lahteine
147d9d76fc Merge pull request #6928 from Bob-the-Kuhn/Fix-case-light-logic-on-Azteeg-X3-boards 
Fix case light logic on Azteeg_X3 boards.
 2017-06-01 20:14:15 -05:00
guntherv73
4288c4fb4f Configurations for Malyan M150 2017-06-01 19:26:29 -05:00
Scott Lahteine
1919cb0d1e Config cleanups 2017-06-01 19:26:16 -05:00
Bob-the-Kuhn
9a9bbfc57c Fix case light logic on Azteeg_X3 boards. 2017-06-01 12:33:24 -05:00
Thomas Moore
a32f7b329c Fix heater status display for advanced pause 2017-06-01 12:29:47 -05:00
Scott Lahteine
445865ea03 REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL 2017-05-31 23:48:03 -05:00
Scott Lahteine
4296a8b74e For status scrolling, pad a short message 2017-05-31 23:48:03 -05:00
Scott Lahteine
4a96433b7e Simplify counting of printable characters 2017-05-31 23:45:41 -05:00
Scott Lahteine
8d69394ae1 Fix LCD printing of progmem strings 2017-05-31 23:36:57 -05:00
Scott Lahteine
c74d4dede6 Prevent illegal leveling combinations 
Addressing issue #6901
 2017-05-31 23:36:57 -05:00
Scott Lahteine
155aa62fb0 Merge pull request #6912 from thinkyhead/bf_better_pulse_delay 
Account for dual XYZ in pulse delay cycles estimate
 2017-05-31 22:21:47 -05:00
Scott Lahteine
a5fa586642 Preferred patch to gcode.h 2017-05-31 21:18:16 -05:00
Bob-the-Kuhn
1b41e1f645 another compile error 
only seen if

#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
      ...
    #if
ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)
 2017-05-31 13:59:49 -05:00
Bob-the-Kuhn
65bd4c8c94 Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x) 
M355 case light improvements (replaces PR #5685)
 2017-05-31 13:33:59 -05:00
Bob-the-Kuhn
9657e7d3ee copied file changes from PR #5685 
==============================

Configuration_adv.h changes

==============================

add "live" LCD update

==============================

P & S version

==============================

final (hopefully) tested version

==============================

update M115 capabilities print

==============================

Menu changes portion of the requested changes

==============================

changed USEABLE_HARDWARE_PWM from a function to a series of macros

==============================

changes per review
 2017-05-31 13:22:38 -05:00
Bob-the-Kuhn
8206bb9bb9 fix compile error 
invalid conversion from 'const char*' to 'char*' [-fpermissive]
 2017-05-31 13:17:01 -05:00
Scott Lahteine
df91346188 Account for dual XYZ in pulse delay cycles estimate 2017-05-31 12:23:28 -05:00
Scott Lahteine
7236109f2a Patch M24 / M125 for delta 2017-05-30 23:07:29 -05:00
Scott Lahteine
be17033762 Fix case light menu toggle 2017-05-30 14:03:45 -05:00
Scott Lahteine
89b93058e3 Merge pull request #6887 from christianh17/PR-sanitycheck 
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
 2017-05-30 13:43:39 -05:00
Scott Lahteine
05b66234ae Merge pull request #6895 from thinkyhead/bf_user_commands 
Custom user commands menu
 2017-05-30 13:40:50 -05:00
Scott Lahteine
84a0a77c59 Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance 
Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled
 2017-05-30 13:37:51 -05:00
Scott Lahteine
266ae8912a Formatting in _draw_heater_status 2017-05-30 03:32:16 -05:00
Scott Lahteine
6b9ca16f36 Patch lcd_print edge limit code 2017-05-30 03:32:15 -05:00
Tannoo
74d6dee920 User Command (Script) Menu 
The menu (commands / scripts) is configurable in `Configuration_adv.h`.

- Added conditionals.
- Changed script handling.
- Slimmed and working!
- Added Status message.
- Returning to lcd status screen now!
- Example Configs Updated.
- Cleanups by @thinkyhead
 2017-05-30 02:33:57 -05:00
Scott Lahteine
d9c8072037 Edit PROPORTIONAL_FONT_RATIO comment 2017-05-30 01:29:39 -05:00
Scott Lahteine
46b32e4548 Cleanup LCD interface, add lcd_reset_status 2017-05-29 22:16:13 -05:00
Scott Lahteine
ca99d67ede Fix UBL "Info screen" menu items 2017-05-29 19:55:26 -05:00
Scott Lahteine
2c7a39bc0e Fix LCD print aborted message 2017-05-29 19:52:01 -05:00
Scott Lahteine
0f1e8c195d Draw on LCD after value has changed 2017-05-29 19:42:30 -05:00
Scott Lahteine
51587c4b43 Rename Feedrate to Velocity to match prior naming 2017-05-29 17:54:15 -05:00
Scott Lahteine
9677f3f2f5 Patch up LCD Bed Leveling menu 2017-05-29 17:51:11 -05:00
Scott Lahteine
fc2eaab7f3 Show home option in level bed menu 2017-05-29 17:51:10 -05:00
Scott Lahteine
c6a7adc293 Patch G29 A and Q arguments to bypass setup 2017-05-29 17:51:10 -05:00
Scott Lahteine
4cece2d72e Use NAN for G29 W omitted parameters 2017-05-29 17:51:10 -05:00
Scott Lahteine
2d71569138 Fix spacing in JSON output 2017-05-29 17:51:10 -05:00
Scott Lahteine
b2d3c8aedd Have G28 do a refresh of the display 2017-05-29 17:51:10 -05:00