MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,647 Commits 1 Branch 0 Tags 96 MiB
f6bf247302
Commit Graph

2480 Commits

Author SHA1 Message Date
Sebastianv650
b8f1b74abd [1.1.x] Silence M204 (#10036) 
`M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.
 2018-03-10 07:15:52 -06:00
Scott Lahteine
e8fc0e9a57 Move [xyz]_endstop_adj to Endstops class 2018-03-10 06:54:18 -06:00
Scott Lahteine
83c83e3127 Update Marlin G-codes summary 2018-03-10 06:54:18 -06:00
Scott Lahteine
5ce64f6d16 Combine __AVR__ and USBCON for 2.0.x parity 2018-03-10 01:51:35 -06:00
Scott Lahteine
1b79217fbc Add UNKNOWN_Z_NO_RAISE option 
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
 2018-03-09 23:11:35 -06:00
Scott Lahteine
192507b524 Move do_probe_raise closer to set_probe_deployed 
…and limit the raise to Z_MAX_POS
 2018-03-09 23:03:12 -06:00
Scott Lahteine
e5e3c3ff35
Update powersupply_on in power_on/off (#10014) 
Fix #10004
 2018-03-08 18:56:41 -06:00
Scott Lahteine
9c667b5436 Init old_red to 127 to ensure initial change 
Fix #10012
 2018-03-08 18:27:39 -06:00
Scott Lahteine
de8fbdea6d Init watchdog last in setup() 2018-03-08 17:36:01 -06:00
Scott Lahteine
e7d519c898 Add suspend_auto_report flag to suppress auto-report 2018-03-07 01:58:37 -06:00
Scott Lahteine
2bf1bbf399 Add HAS_TEMP_SENSOR conditional 2018-03-07 01:58:31 -06:00
Scott Lahteine
1ed1882766 Strip extra newline 2018-03-07 00:22:31 -06:00
Scott Lahteine
fb9de6e787 Add AUTO_REPORT_SD_STATUS feature 
For parity with 2.0.x ahead of 1.1.9 release.
 2018-03-07 00:06:03 -06:00
Scott Lahteine
ecddd2a655 Make enums into implicit char 2018-03-06 23:36:56 -06:00
Scott Lahteine
fa998178e9 Move extended_axis_codes to PROGMEM 2018-03-06 22:20:35 -06:00
Scott Lahteine
0b016c08c9 M851 - report only with no Z parameter 2018-03-05 02:10:32 -06:00
Scott Lahteine
890a396a2a
Import FilamentRunoutSensor with debounce (#9947) 2018-03-05 01:49:19 -06:00
Scott Lahteine
f0d8d76f68
Use static classes for job timers (#9940) 2018-03-04 22:52:25 -06:00
Scott Lahteine
081ab35e82 Remove some trailing whitespace 2018-03-04 21:13:36 -06:00
teemuatlut
36a94ac586 Fix M915 compiling 2018-03-04 11:26:30 +02:00
Thomas Moore
bdfeb54a9d Clear retracted status when homing the Z axis 2018-03-03 23:17:10 -06:00
Scott Lahteine
cd4c35c543 Correct M401 / M402 description 2018-03-01 19:11:30 -06:00
Scott Lahteine
b86125c6d6 Update M900 verbiage 2018-03-01 15:25:33 -06:00
Scott Lahteine
a6326d25fb Drop SCARA_FEEDRATE_SCALING 
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
 2018-03-01 04:28:42 -06:00
Studiodyne
d25f0a5a21 Fix for Fwretract bugfix1.1.x (#9872) 2018-03-01 02:59:42 -06:00
Sebastianv650
951b65c2de Add sanity checks to Linear Advance 1.5 (#9859) 2018-03-01 02:10:39 -06:00
Scott Lahteine
f7b44ac2a6
Fix SENSORLESS_HOMING for Core Kinematics (#9871) 2018-03-01 01:49:41 -06:00
Scott Lahteine
2e3d74f60f Drop a conditional only used once 2018-02-24 16:31:05 -06:00
Scott Lahteine
1c1d444b0c
Merge pull request #9774 from thinkyhead/bf1_g28_restore_leveling 
[1.1.x] Add RESTORE_LEVELING_AFTER_G28 option
 2018-02-23 13:43:03 -06:00
Scott Lahteine
742733d714
Un-pause on print cancellation (#9779) 2018-02-23 13:42:21 -06:00
Scott Lahteine
921001f004 Add RESTORE_LEVELING_AFTER_G28 option 
Reference #8670
 2018-02-23 12:42:17 -06:00
Scott Lahteine
113a5fa80e Fix broken LEVEL_BED_CORNERS 
Fix #8805
 2018-02-23 09:10:33 -06:00
Sebastianv650
9c65890644 [1.1.x] LIN_ADVANCE v1.5 (#9700) 2018-02-23 00:53:41 -06:00
Scott Lahteine
1d78bdac82 quick_home_xy sensorless homing 2018-02-20 20:09:45 -06:00
Scott Lahteine
e3370d097a Add a SENSORLESS_HOMING delay to quick_home_xy 
Fix #9471
 2018-02-19 10:11:25 -06:00
Scott Lahteine
b1ec140f0b Don't raise FIX_MOUNTED_PROBE on stow 
Reference #9336
 2018-02-19 08:34:25 -06:00
Scott Lahteine
c04f8e8c9d Support for multiple filament runout sensors 2018-02-19 06:25:35 -06:00
quittenkaes
971732b9f6 Add a delay before moving to z_safe_homing position if using TMC2130 sensorless homing (#9705) 
A short delay is needed after homing an axis with TMC 2130 sensorless homing. Otherwise the axis wont move.
 2018-02-18 19:29:06 -06:00
Scott Lahteine
65d69e9507 Strip excess G28 debug logging 2018-02-18 01:09:56 -06:00
Scott Lahteine
2e5a6243df Option to force X or Y to home first when homing the other axis 2018-02-18 01:06:57 -06:00
Scott Lahteine
023d21a1cf Add SERIAL_FLUSH and SERIAL_FLUSHTX macros 2018-02-16 17:50:58 -06:00
Bob-the-Kuhn
15204bd5e9 Fix compile issue with USE_CONTROLLER_FAN (#9665) 2018-02-16 02:02:20 -06:00
AnHardt
e301e28e45 Complete M48 description_1 (#9630) 2018-02-14 05:17:48 -06:00
Scott Lahteine
6e4a7e2dcb Init lcd message string programmatically 2018-02-14 05:08:06 -06:00
Scott Lahteine
c93dab2307 MYSERIAL => MYSERIAL0 
For cleaner diffing with Marlin 2.0.x.
 2018-02-14 02:56:56 -06:00
teemuatlut
7babfbbcb2 Fix M914 macro 2018-02-11 13:08:55 +02:00
Scott Lahteine
61f3051982 Fix plan_arc clockwise (G2) 
Fix #9482
 2018-02-11 03:32:18 -06:00
Scott Lahteine
5e72729c67 Fix #8744 2018-02-10 16:51:55 -06:00
teemuatlut
7ee87dc2db Init CS pins before loading settings 2018-02-10 19:16:08 +02:00
Scott Lahteine
5a53e4d921
Merge pull request #9548 from thinkyhead/bf1_prevent_comments_resetting 
[1.1.0] Prevent watchdog reset due to many comments
 2018-02-09 07:15:10 -06:00
Scott Lahteine
8979990805
Merge pull request #9543 from thinkyhead/bf1_reliable_probe_heaters_off 
[1.1.x] More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
 2018-02-09 07:10:33 -06:00
Scott Lahteine
96bcf08477 Tweak escape handling in serial input 2018-02-09 04:06:44 -06:00
Scott Lahteine
68cc5c72fd No EXTRUDER_RUNOUT_PREVENT during print 2018-02-09 03:36:42 -06:00
Scott Lahteine
c4dbedd5b6 Prevent watchdog reset due to many comments 
Addressing #7449
 2018-02-09 01:50:42 -06:00
Scott Lahteine
9727e5e3d6 Minor comment/condition cleanup 2018-02-09 00:53:04 -06:00
Scott Lahteine
9dd8a49f82 Add pin_t to Marln 1.1 branch 2018-02-08 21:01:41 -06:00
Scott Lahteine
1ddbdd0321 Not yet, HAS_DISPLAY 2018-02-08 04:03:05 -06:00
Scott Lahteine
c1a3ec1228
Tweaky followup to I2CPEM update 2018-02-08 03:21:46 -06:00
jaysonkelly
f8a8711075 I2C position encoders update 
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
 2018-02-08 02:46:12 -06:00
Thomas Moore
a471cd26e1 [1.1.x] Enable Z axis and delta sensorless homing (#9532) 2018-02-08 02:02:48 -06:00
Scott Lahteine
f3a09768e8 Tweak early handling of M108/M112/M410 2018-02-07 22:43:51 -06:00
Scott Lahteine
c4f1a191c3 Marlin.ino needs no content 2018-02-06 01:09:51 -06:00
Christopher Reimer
254417e8b0 Enable and disable power supply automatically 2018-02-06 00:20:33 -06:00
Scott Lahteine
0f6f05441b Implement MALYAN_LCD 2018-02-04 21:18:49 -06:00
Scott Lahteine
21bfbb9d44 Apply standards for whole-file conditions 2018-02-04 21:17:03 -06:00
Scott Lahteine
5054c53901 Export more in ultralcd.h 
Closer parity with 2.0.x
 2018-02-04 21:17:03 -06:00
Thomas Moore
5b4e39a429 Apply feedrate to nozzle movement for kinematic machines 2018-02-03 22:17:13 -06:00
Custom3DProducts
f4076fe99d [1.1.x] Add Z_PROBE_HYSTERESIS to mitigate Z jerking while probing (#9375) 2018-02-02 02:29:19 -06:00
GMagician
4661451d32 [1.1.x] Fix compile error on delta when NO_WORKSPACE_OFFSETS (#9387) 2018-02-02 01:43:53 -06:00
Scott Lahteine
0a10d010b7
Merge pull request #9390 from tcm0116/1.1.x-retract 
[1.1.x] Clear retracted status when homing the Z axis
 2018-02-01 23:36:53 -06:00
Scott Lahteine
7a056a4e09 Patch resume_print based on suggestion 
See #9392
 2018-02-01 23:34:14 -06:00
Scott Lahteine
b78cccad0f Fix broken G29 W I J 2018-02-01 19:50:18 -06:00
Thomas Moore
36a1d12238 Clear retracted status when homing the Z axis 2018-01-29 19:35:16 +00:00
Scott Lahteine
a855d01336 Fix M118 parameter parsing 2018-01-23 23:50:42 -06:00
Scott Lahteine
3ab4736ac9 Move some strings to PROGMEM 2018-01-23 23:50:42 -06:00
Scott Lahteine
f447668387 Optimize some serial strings 2018-01-23 18:59:35 -06:00
Scott Lahteine
d4ab383a1b Lightly optimize arc length calculation 2018-01-23 18:59:35 -06:00
Scott Lahteine
87c254b238
Patch M114 D logical output 2018-01-23 18:48:53 -06:00
Scott Lahteine
df5c06ab7b Fix G29 no_action with A and Q 2018-01-23 13:58:36 -06:00
Scott Lahteine
b2dcb75c6c Include Z Fade in log_machine_info 2018-01-23 13:58:36 -06:00
Thomas Moore
b818543045 [1.1.x] Fix change filament for delta machines (#9296) 2018-01-22 10:19:00 -06:00
Scott Lahteine
049898fa30 Update comment on set_home_offset 2018-01-22 06:14:55 -06:00
Scott Lahteine
feb6014e92 Don't run M600 on filament runout if the nozzle is cold 2018-01-22 05:46:29 -06:00
Scott Lahteine
c7ae531e35 Better LCD message when heating needed 2018-01-22 05:46:29 -06:00
Scott Lahteine
c373afbddd Clean up and document load/unload/pause/resume 2018-01-22 05:46:19 -06:00
Scott Lahteine
c970869d74 Add hotEnough methods 2018-01-22 05:46:19 -06:00
nhchiu
4a40cf268d Use NEOPIXEL as case light 
Add an option to use the NEOPIXEL LED as case light.
 2018-01-20 16:57:04 -06:00
Scott Lahteine
81a12b2fac Relative movements fix 2018-01-20 15:22:38 -06:00
Thomas Moore
f8192f6e46 Allow DELTA to compile with soft endstops disabled 2018-01-20 09:43:59 -06:00
Roxy-3D
597d94bd3a
Better handle serial buffer over run 2018-01-18 16:48:12 -06:00
Scott Lahteine
c1d6d24b9d Cleanup spacing, commentary 2018-01-11 18:52:54 -06:00
Scott Lahteine
3df0d62725 Updates to TMC support 2018-01-10 04:32:49 -06:00
Dave Johnson
dd55c98139 SERIAL_STATS_* features not supported on USBCON targets 2018-01-09 16:27:57 -08:00
Anthony
1326eb4ef7
fix fwretract structure reference #9102 
Marlin_main.cpp: In function 'void resume_print(const float&, const float&, int8_t)':

Marlin_main.cpp:6646: error: 'retract_length' was not declared in this scope
         do_pause_e_move(-retract_length, fwretract.retract_feedrate_mm_s);
                          ^
 2018-01-08 18:48:19 -06:00
Scott Lahteine
ffeb4495fe Make mbl.has_mesh() a method 2018-01-07 18:14:37 -06:00
Scott Lahteine
be555e3578 Move MBL functions into the class 2018-01-07 18:14:37 -06:00
Scott Lahteine
fa3709451b
Set mbl.has_mesh on manual point entry 
Based on #9086
 2018-01-06 23:32:00 -06:00
Someone Unknown
b5e98ac1b7 Set laser/spindle PWM to lowest speed on M5 2018-01-06 14:01:58 -06:00
Scott Lahteine
42216f52ab Add MarlinSettings::validate() 2018-01-05 14:40:20 -06:00
Scott Lahteine
2287fa126c Whitespace cleanup 2018-01-05 10:19:15 -06:00