Firmware2

Author	SHA1	Message	Date
InsanityAutomation	de648bfdc1	Add Funmat HT V4.0 board support (#17305 ) Co-authored-by: Scott Lahteine <github@thinkyhead.com>	2020-03-27 21:08:47 -05:00
Giuliano Zaro	129b270628	QSPI EEPROM for SAMD51 (#17292 )	2020-03-27 17:29:17 -05:00
Roxy-3D	075a86b076	Update LCD timing on Formbot T-Rex 2+ machines The code is slightly more optimized than it used to be and this has caused the setup and hold times on the Formbot T-Rex 2+ machines to be insufficient. This change gives sufficient margin and the LCD Display is clean again.	2020-03-24 17:15:03 -05:00
Scott Lahteine	7455bb09b3	Add SoftwareSerialM for MKS Robin (#17207 )	2020-03-24 16:14:30 -05:00
RasmusAaen	717c216851	Fix Copymaster Y_MAX pin (#17267 )	2020-03-23 17:34:38 -05:00
Scott Lahteine	2c325c2a7d	Format some pins files	2020-03-21 21:18:46 -05:00
Scott Lahteine	e62b52da99	Use pin/port names for CHITU pins	2020-03-21 21:18:46 -05:00
Scott Lahteine	04cea864bc	Split up STM32 pins files (#17212 )	2020-03-20 23:45:00 -05:00
RasmusAaen	c768605bde	Add Copymaster3D board (#17188 )	2020-03-17 15:25:10 -05:00
Scott Lahteine	e8205af6fb	Apply HAS_TMC_UART to pins files	2020-03-17 15:06:01 -05:00
Karl Andersson	e5dcab8fd2	ARMED support for TMC UART, probe temp (#17186 )	2020-03-17 15:05:12 -05:00
ellensp	40922c7da7	Fix MKS SBASE 1.6 E1 heater pin (#17191 )	2020-03-17 14:51:57 -05:00
Scott Lahteine	f6e80d576d	Fix Z_MIN_PROBE_PIN on SKR 1.4 (#17187 )	2020-03-16 17:49:33 -05:00
Scott Lahteine	b14c933171	LPC1768 EEPROM fallback to flash, add overrides (#17184 )	2020-03-16 15:59:05 -05:00
Scott Lahteine	118bd2f8b2	Apply loop shorthand macros (#17159 )	2020-03-13 23:18:16 -05:00
Daniel Kreuzhofer (@danieldotnet)	f29d6f802f	Revert Anet 1.x envs change (#17120 )	2020-03-11 15:08:47 -05:00
Daniel Kreuzhofer (@danieldotnet)	d78fbce827	Fix pio environments for Anet 1.x (#17109 )	2020-03-10 20:04:44 -05:00
Scott Lahteine	8f66dbfcd5	SD_DETECT_INVERTED => SD_DETECT_STATE (#17112 )	2020-03-10 15:43:06 -05:00
Scott Lahteine	982197b162	Fixes for Z4 axis, CS pins (#17097 )	2020-03-08 16:31:37 -05:00
Scott Lahteine	20f93404a7	Add / correct comments	2020-03-07 02:16:17 -06:00
Scott Lahteine	3db784f3c7	More pins debugging cleanup	2020-03-07 02:15:05 -06:00
Scott Lahteine	e9f451bffe	Pins debug followup	2020-03-06 21:59:20 -06:00
Scott Lahteine	ca4423ed2a	Clean up pins debugging	2020-03-06 13:14:22 -06:00
Scott Lahteine	6cd99e6a77	Add pins to the pins debug list	2020-03-06 13:14:22 -06:00
Scott Lahteine	c0801e900d	Define Z_MIN_PROBE_PIN for Cohesion 3D Remix	2020-03-05 15:10:46 -06:00
Scott Lahteine	e3da86fb45	Fix SKR test for ONBOARD SD	2020-03-05 13:37:09 -06:00
Scott Lahteine	d4ac78535c	Allow Z_STOP_PIN override on SKR 1.4 (#17063 )	2020-03-04 13:12:48 -06:00
Scott Lahteine	72b63e9520	Fix TEMP_PROBE_PIN for SKR 1.4 Co-Authored-By: Anthrix <anthrix@users.noreply.github.com>	2020-03-03 14:53:22 -06:00
George Fu	a698bfdc2a	Update FYSETC S6 pins/variants (#17056 )	2020-03-03 14:30:09 -06:00
Scott Lahteine	b1a50d54e2	HAS_TRINAMIC => HAS_TRINAMIC_CONFIG	2020-03-02 12:04:36 -06:00
Scott Lahteine	736521a3f1	Balance mega tests, shorten some env names	2020-03-01 21:20:22 -06:00
Jason Smith	cc822bf70f	Fix some 8 extruders issues, GTR build (#17043 )	2020-03-01 21:19:02 -06:00
Jason Smith	5da6819277	Fix build issues with REPRAPWORLD_KEYPAD (#17038 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2020-03-01 19:54:22 -06:00
ellensp	4b256a6fa8	Revert FYSETC Mini encoder change (#17040 ) Reverting #17010	2020-03-01 17:59:00 -06:00
Vert	6c9ca1bec2	Clarify GT2560 common pins (#17021 )	2020-02-29 04:35:10 -06:00
ellensp	9b145c7c73	Reverse encoder for FYSETC Mini 12864 2.1 + SKR 1.3 (#17010 )	2020-02-28 12:26:54 -06:00
Scott Lahteine	633b716a3a	Define DIAG pins for MKS SGen-L	2020-02-26 11:35:07 -06:00
InsanityAutomation	28008aced0	Correct SKR expansion port pins (#16974 )	2020-02-26 04:18:34 -06:00
ellensp	70af080813	Add LPC1768 Serial ports for pinsDebug (#16980 )	2020-02-26 04:12:53 -06:00
Scott Lahteine	5b438fb20d	HAS_SDCARD_CONNECTION is more obsolete	2020-02-25 22:30:30 -06:00
InsanityAutomation	6bfae5de6f	Fix SKR 1.4 Turbo SD_DETECT_PIN (#16955 )	2020-02-25 03:17:08 -06:00
Scott Lahteine	5e197df89a	Fix Babystepping loop (again)	2020-02-24 05:48:42 -06:00
ZMiguel Alves	2471a8bb91	Define ANET_FULL_GRAPHICS_LCD pins for SKR 1.4 (#16928 )	2020-02-22 18:45:10 -06:00
vivian-ng	eeec4c27e7	[ESP32] Allow user to define pins for hardware Serial1 and Serial2 (#16918 )	2020-02-22 04:00:10 -06:00
Scott Lahteine	5d16497bed	Tweak pins spacing, comments	2020-02-21 08:33:11 -06:00
ellensp	9f53bbd791	Add PICA shields support (#16891 )	2020-02-21 08:27:32 -06:00
Scott Lahteine	2b788e9aa6	Single envs for specific boards	2020-02-20 20:20:15 -06:00
Scott Lahteine	1087e318e5	Fix a BORG compile warning	2020-02-15 01:47:15 -06:00
George Fu	63dd0f249d	Fysetc S6 pins / LCD updates (#16830 )	2020-02-14 07:18:57 -06:00
Giuliano Zaro	ff0c931e47	Add RAMPS 1.4.4 to AGCM4 (#16606 )	2020-02-13 23:28:18 -06:00
Scott Lahteine	71539bcbeb	Undo driver type auto-assignment for now Good general concept but needs more time to develop and group with a stepper suite.	2020-02-11 02:32:01 -06:00
Daniel Mazurkiewicz	e561f744fa	Update MKS BASE and v1.6 pins (#16806 )	2020-02-10 14:12:11 -06:00
Fabio Santos	894762259b	Coolstep for TMC2130, 2209, 5130, 5160 (#16790 )	2020-02-08 21:01:57 -06:00
Bob Kuhn	78fea4a9ca	Split up MKS_RUMBA32 into two variants (#16781 )	2020-02-05 20:28:28 -06:00
thisiskeithb	9b4192cdd0	Add MKS Base 1.6 board (#16783 )	2020-02-04 23:21:05 -06:00
Scott Lahteine	7bf2190f03	Fix CALIBRATION_GCODE pin handling	2020-02-04 08:32:43 -06:00
Bob Kuhn	0268c1d02c	STM32duino - Use SDIO for onboard SD (#16756 )	2020-02-04 01:24:11 -06:00
Scott Lahteine	bfad23d3e2	(c) 2020	2020-02-03 08:00:57 -06:00
Scott Lahteine	4716dac874	Apply REPEAT, RREPEAT, and loop macros (#16757 )	2020-02-01 21:00:53 -06:00
Scott Lahteine	63469ed8f7	Add EXP labels to SKR pins	2020-02-01 19:06:32 -06:00
Scott Lahteine	43d3463d5d	Misc cleanup, whitespace	2020-02-01 03:50:42 -06:00
Jason Smith	5b3d968634	Option for Trigorilla 1.4 with add-on endstops board (#16737 )	2020-01-31 21:51:59 -06:00
rebel1	300b81bfcb	Fix BTT SKR 1.4 extra endstop pins (#16738 )	2020-01-31 21:46:02 -06:00
Scott Lahteine	62f52ebb3a	Fix up, improve endstop pin auto-assignment Followup for #16723	2020-01-30 14:09:33 -06:00
Scott Lahteine	e8e25b80d1	Extend RX/TX pins for up to 8 extruders	2020-01-30 13:29:19 -06:00
Robert Stein	2822c0890a	Set up DIAG endstops for BTT SKR 1.4 / 1.4 Turbo (#16727 )	2020-01-30 13:17:15 -06:00
Scott Lahteine	5b12627e14	Auto assign DIAG pins for multi-endstop (#16723 )	2020-01-30 03:24:57 -06:00
Mauro	1bc6509d02	Support for E4d@BOX mainboard (#16716 )	2020-01-30 03:06:17 -06:00
Scott Lahteine	e8ed4329ea	Cleanup of old includes, add comments	2020-01-29 22:41:18 -06:00
Scott Lahteine	2325bede8a	Fix Trigorilla 1.4 limit switches See #16612	2020-01-26 21:08:55 -06:00
ellensp	0949c0f326	SKR 1.3 sensorless endstops hack (#16659 )	2020-01-26 03:49:11 -06:00
ellensp	4a71285c34	Fix Serial defines for M43 on AVR (#16649 )	2020-01-26 03:05:34 -06:00
yangwenxiong	248b7dfa59	BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595 )	2020-01-25 02:13:39 -06:00
Bob Kuhn	0d166f9c7d	Duet Smart Effector support (#16641 )	2020-01-25 02:00:51 -06:00
MaukCC	04d64351a2	Add HMS434 V15 ATSAM board (#16620 )	2020-01-21 01:10:31 -06:00
Bob Kuhn	1a5cbc9052	Fix STM401/4xx/STM32F7xx timers, STEVAL_3DP001V1 warning (#16621 )	2020-01-20 18:33:36 -06:00
InsanityAutomation	0fcf2b1110	Quad Z stepper support (#16277 )	2020-01-19 23:35:07 -06:00
thisiskeithb	3b34fbd4c4	Update BTT002 pins (#16591 )	2020-01-19 22:21:32 -06:00
tompe-proj	a338dce83f	PINDA v2 temperature sensor / compensation (#16293 )	2020-01-17 17:16:45 -06:00
George Fu	4108c5d01f	Update FYSETC S6 pins (#16559 )	2020-01-17 13:16:05 -06:00
vivian-ng	e94f782f51	Shared SPI sanity check (#16581 )	2020-01-17 02:54:22 -06:00
Bob-the-Kuhn	0d0dfba203	STM32 soft SPI. STEVAL_3DP001V1 SD read. M906 tweaks. (#16579 )	2020-01-17 02:44:01 -06:00
Jason Smith	c305c2cc6b	Fix some warnings, Melzi pins	2020-01-15 19:57:16 -06:00
thisiskeithb	7eed008e8e	Use Flash EEPROM on BTT002 (#16558 )	2020-01-15 01:27:32 -06:00
Bob Kuhn	53dfeed6c0	Steval_3DP001V1 timers, analog inputs, etc. (#16565 )	2020-01-14 23:19:13 -06:00
Scott Lahteine	0e6ef65aec	Clean up whitespace	2020-01-13 16:56:56 -06:00
Luc	d854c8fa5f	ESP3d integration for ESP32 (#16515 )	2020-01-10 17:22:41 -06:00
ellensp	994c695862	Fix MKS_SGEN sanity check (#16501 )	2020-01-07 21:47:45 -06:00
greppp	7f87a044cd	Fix Ender-2 display pins, add BTN_ENC (#16349 )	2020-01-03 20:44:16 -06:00
George Fu	ceeba58dc9	FYSETC F6 v1.4 board support (#16321 )	2020-01-03 20:29:25 -06:00
ellensp	d7aee3b7b6	Pins debugging AVR serial pins (#16437 )	2020-01-03 17:40:56 -06:00
thisiskeithb	64fdc4f24b	BTT002: Add runout, PLR, and RGB pins (#16442 )	2020-01-03 17:38:15 -06:00
Jason Smith	595e684658	Add Leapfrog Xeed 2015 support (#16400 )	2020-01-02 22:04:13 -06:00
ellensp	7a50dbc00d	Add motherboard BIGTREE_SKR_V1.4_TURBO (#16374 )	2020-01-02 21:15:34 -06:00
Scott Lahteine	a2cda631d9	Clean up trailing whitespace	2020-01-02 16:33:50 -06:00
Alexander Gavrilenko	c6f7ea9f22	MKS Robin ILI9328 TFT support (#16401 )	2020-01-01 20:55:37 -06:00
Bob Kuhn	747b2b9bf4	Improve STEVAL_3DP001V1 and future STEVAL_* support (#16404 )	2020-01-01 20:52:56 -06:00
Luu Lac	baa101253a	MKS Robin 2 (STM32F407ZE) base support (#16270 )	2019-12-22 18:16:08 -06:00
ferengi82	2230ef6e09	MKS SGen-L pins EEBF or EFBF scheme (#16296 )	2019-12-22 17:11:49 -06:00
FLYmaker	59f9bb2120	Add FLYBOARD (STM32F407ZG) (#16257 )	2019-12-22 03:05:30 -06:00
Luc	a3d88aebed	Add MRR_ESPA/_ESPE (ESP32) boards (#16238 )	2019-12-21 18:58:00 -06:00
BigTreeTech	bbe0ffb2fa	BigTreeTech SKR v1.4 support (#16236 )	2019-12-19 02:41:35 -06:00
Mario Costa	5f06f42ccd	Spindle/Laser pins for RADDS (#16119 )	2019-12-19 02:37:07 -06:00
Vertabreaker	e0c71344ed	Define more FAN pins for GT2560 (#16235 )	2019-12-15 20:28:55 -06:00
chzj333	42a336f8bc	Update BTT002 platform (fixing SD init) (#16217 )	2019-12-15 12:24:54 -06:00
Tanguy Pruvot	a0badf572e	STM32 Touch UI timings, Longer onboard pullups (#16219 )	2019-12-15 12:03:39 -06:00
thisiskeithb	a358b72ec8	Add SKR Mini E3 + Zonestar LCD warning (#16214 )	2019-12-15 12:02:20 -06:00
thisiskeithb	dc8d8cb39c	Fix MKS SGen-L SD detect pin (#16224 )	2019-12-15 11:25:07 -06:00
Anders Sahlman	3d4aa015a8	Add MKS Robin Mini EEPROM defines (#16203 )	2019-12-12 16:35:46 -06:00
ManuelMcLure	b065a60dd0	Onboard (always-on) pullups support (#16144 )	2019-12-12 15:49:14 -06:00
thisiskeithb	98814e1c47	MKS 12864 OLED pins for SGEN-L (#16188 )	2019-12-11 02:18:21 -06:00
MS1987	31fdaea269	Add MKS Robin Pro, MKS Robin Lite3 (#16163 )	2019-12-11 00:23:47 -06:00
Anders Sahlman	1bcd47e65f	Correct MKS Robin Mini pins (#16178 )	2019-12-10 23:32:11 -06:00
Antti Andreimann	1465fc0632	Fix controller and SD on Robin Nano (#16187 )	2019-12-10 23:29:33 -06:00
Vertabreaker	0832a60db3	EXP3D Imprimante Multifonction (#16079 )	2019-12-03 06:52:38 -06:00
ellensp	cb4cd76086	Fix TMC_SW_MOSI for BTT_SKR_MINI_V1.1 (#16081 )	2019-12-03 06:44:36 -06:00
Scott Lahteine	6134bff81b	Expand environments in platformio.ini	2019-12-02 21:19:23 -06:00
Vertabreaker	3874f4a097	Geeetech A30 / GTM32 support (#16071 )	2019-12-01 21:25:45 -06:00
hammerhead2k2	19f840a9b5	BTT SKR 1.3 pins for Anet Full Graphics LCD (#16047 )	2019-11-30 08:21:54 -06:00
Scott Lahteine	1ee648ecd2	Followup to "optimize common strings"	2019-11-30 06:55:32 -06:00
Scott Lahteine	2d74c2042a	Clean up whitespace, GTM32 pins	2019-11-29 20:05:32 -06:00
Vertabreaker	1803f672f8	Pins for GTM32 board variants (#16020 )	2019-11-29 07:12:49 -06:00
Jason Smith	ce9a4afe95	Better ST7920 timings for FYSETC S6 (#16022 )	2019-11-27 01:26:21 -06:00
Dirk O. Kaar	0550f30790	Renkforce configuration updates (#16017 )	2019-11-26 20:22:17 -06:00
Vertabreaker	12417d087b	E2 pins for GT 2560 v3 (#16016 )	2019-11-26 17:43:27 -06:00
George Fu	cf1e19d167	Fysetc S6 support (#15850 )	2019-11-26 16:15:03 -06:00
Dirk O. Kaar	1cea1687f3	Renkforce RF100 (V1), V2, XL, and XL Plus (#15695 )	2019-11-26 14:06:23 -06:00
thisiskeithb	f786cc5145	Revert default BTT STM32F103 environment (#16006 )	2019-11-26 04:28:13 -06:00
madmattco	049e8d5963	Add VAKE / VAKE403D support (#15631 )	2019-11-26 04:00:59 -06:00
Heilig Benedek	993802c404	Fix Ender 2 display SCK, BTN_ENC pins (#15997 )	2019-11-26 03:48:21 -06:00
Scott Lahteine	b11551c767	Touch UI updates for Cocoa Press (#15986 )	2019-11-24 06:08:05 -06:00
Scott Lahteine	441e822fb3	LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE	2019-11-23 17:04:17 -06:00
pfillion42	4a5dee6356	(SKR 1.3) Assign DIAG pins for homing dir (#15972 )	2019-11-23 16:20:13 -06:00
Scott Lahteine	8f09d2e790	Add STM32F103RE_bigtree to Auto Build	2019-11-22 16:47:31 -06:00
Gustavo Alvarez	b2a275891c	Support RET6 in BTT SKR Mini (#15957 )	2019-11-21 05:09:01 -06:00
Daniel Negut	a3229b30ec	Add Zonestar/Anet LCD for SKR mini E3 (#15931 )	2019-11-20 00:06:26 -06:00
TheAssassin	814d908a8a	Ender-2 LCD on BTT SKR E3 (#15924 )	2019-11-19 23:21:27 -06:00
thisiskeithb	0f57818f2d	Support 512K "RCT6" in BTT SKR Mini (#15890 )	2019-11-15 02:51:26 -06:00
Robby Candra	fcfde7c2f5	Only assign CS/RX/TX on extra axes with SPI/UART (#15886 )	2019-11-13 02:03:34 -06:00
Scott Lahteine	624336f453	Fix up Megatronics 3.2 test	2019-11-10 16:19:57 -06:00
Jademalo	37874a6472	Fix E0_SERIAL_RX_PIN typo (#15841 )	2019-11-09 22:51:20 -06:00
Marcelo Cerri	b9d351899a	Update SKR mini E3 1.2 Filament Runout pin (#15843 )	2019-11-09 22:49:33 -06:00
Scott Lahteine	7010f92c4b	Board-based LCD delays	2019-11-09 22:33:38 -06:00
Scott Lahteine	9ca25118d0	Whitespace cleanup	2019-11-09 21:17:52 -06:00
Marvin Sinister	8d157a4520	Fix MKS MINI12864 on SKR 1.3 (#15836 )	2019-11-07 19:39:08 -06:00
Jason Smith	814a2eaf8f	Allow TMC baud rate override (#15773 )	2019-11-06 17:08:12 -06:00
Axel	786617e375	Fix RAMPS + VIKI i2c (#15811 )	2019-11-06 16:52:28 -06:00
Scott Lahteine	a89f4703df	Tweak permissions	2019-11-06 16:10:14 -06:00
ellensp	f088c6a850	Add MKS_GEN_L_V2 controller support (#15793 )	2019-11-04 16:31:27 -06:00
Scott Lahteine	55991962be	Patch extra axis MS pins for debugging	2019-11-04 12:28:10 -06:00
Chris Pepper	b9116d4050	LPC176x Framework update (#15722 ) Changes required for compatibility with framework-arduino-lpc176x 0.2.0	2019-11-03 02:34:09 +00:00
Aurawin	b09b469dd5	Add BIQU TANGO V1 support (#15682 )	2019-10-28 18:21:59 -05:00
Scott Lahteine	9720d21301	Clean up trailing whitespace	2019-10-27 15:32:29 -05:00
Scott Lahteine	9e8021d6a4	Fix pins debug of CS/MS pins	2019-10-26 18:46:39 -05:00
Tanguy Pruvot	c58cc113dd	MKS Robin: restore the TFT v2.0 support (ST7789V) (#15675 )	2019-10-25 19:30:43 -05:00
Scott Lahteine	f8ad15fde8	Rename BOARD_STM32F4 to fix use with MB()	2019-10-25 18:12:29 -05:00
InsanityAutomation	82fb046013	Allow suicide pin inverting (#15586 )	2019-10-24 14:07:28 -05:00
Scott Lahteine	af214ff121	Fix up PSU_CONTROL checks	2019-10-22 16:16:12 -05:00
Scott Lahteine	3949d246df	Fix ESP32 name conflict	2019-10-15 17:13:07 -05:00
Jason Smith	53abfdc2c3	Fix BLTOUCH and FAN PWM conflicts on SKR E3 boards (#15547 )	2019-10-15 14:18:46 -05:00
Piotr	fe4c69b64a	Poll all enabled endstop pins (#15525 )	2019-10-15 13:28:04 -05:00
Gustavo Alvarez	df09532a9c	Reassign FIL_RUNOUT_PIN for ReARM boards (#15519 ) Reassign FIL_RUNOUT_PIN from P1_18 to P1_19 P1_18 is connected to a buffer in order to output 5V making it unsuitable for input.	2019-10-12 21:02:20 +01:00
chzj333	d04561805b	Support for BTT SKR Mini E3 v1.2 (#15476 )	2019-10-07 15:45:11 -05:00
Tanguy Pruvot	c6ffa7f38d	MKS Robin: SD pins not required (SDIO) (#15474 )	2019-10-06 23:20:43 -05:00
Me No Dev	fc6a0937b8	Improve Malyan M200 integration (#15462 )	2019-10-05 22:37:22 -05:00
LinFor	e854eb933d	Allow pins overrides for SKR V1.3 (#15451 )	2019-10-05 20:40:01 -05:00
Daniel Andersen	0076e1e792	Fix CR10 Stock Display timing with SKR_PRO V1.1 (#15446 )	2019-10-05 20:33:46 -05:00
Tanguy Pruvot	895f64fbab	Add missing MKS Robin TOUCH_CS_PIN (#15445 )	2019-10-04 01:51:07 -05:00
tonokip	df48ef6df3	Fix step timer on Archim1 (#15447 )	2019-10-03 03:29:15 -05:00
Scott Lahteine	a9c259c77a	Patch PrintrboardG2 build (on spec)	2019-09-30 02:47:55 -05:00
Tanguy Pruvot	43d6e9fa43	STM32F103.. reorganization, SKR mini fix (#15398 )	2019-09-29 02:04:53 -05:00
InsanityAutomation	be3c4a7930	Bring Raptor pins in parity with others (#15410 )	2019-09-28 15:35:13 -05:00
Scott Lahteine	ebfdf740bc	EZBoard only knows stock display	2019-09-27 22:08:13 -05:00
DrDitto	04e4eb35be	MKS_MINI, FYSETC RGB, backlight (#15334 )	2019-09-25 18:41:04 -05:00
Jason Smith	f98999ca20	Fix includes in RAMPS_DUO and RAMPS_SMART (#15321 )	2019-09-25 09:42:03 -05:00
Scott Lahteine	d5a34afa56	Undefine pins only in debug list	2019-09-18 11:53:42 -05:00
Scott Lahteine	ce74e4b3e4	Undefine… redux	2019-09-18 00:28:26 -05:00
Scott Lahteine	34d521234d	Undefine pins to reduce warnings	2019-09-17 23:34:14 -05:00
Tanguy Pruvot	eb1a368277	Fix Lerdge K typos (#15273 )	2019-09-16 16:50:57 -05:00
J.C. Nelson	896162b722	Add pins for Lerdge X and K. (#15271 )	2019-09-15 15:23:04 -05:00
Giuliano Zaro	c96844fae2	[SAMD51] Remove RuRamps4D (#15264 )	2019-09-15 14:17:20 -05:00
Evgeny Zyatkov	61e3f119f4	FYSETC_MINI_12864 pins for SKR PRO 1.1 (#15253 )	2019-09-14 06:22:30 -05:00
Scott Lahteine	ef8ce2e2e5	Allow TEMP_CHAMBER_PIN override	2019-09-13 18:45:59 -05:00
InsanityAutomation	dcc39421c5	Minor Pin Updates (#15214 )	2019-09-09 23:58:57 -05:00
thisiskeithb	66338ed515	CR-10 Stock Display for SKR Mini 1.1 (#15215 )	2019-09-09 23:56:02 -05:00
Ludy	3c3a956a17	Fix compiling error BIGTREE_SKR_MINI (#15197 ) Let's get STM32F1 working again!	2019-09-09 10:34:54 -05:00
Scott Lahteine	dbea6f0022	STM32F1 USB cdc/msc composite device (#15180 ) Co-Authored-By: bigtreetech <38851044+bigtreetech@users.noreply.github.com>	2019-09-08 02:28:22 -05:00
Scott Lahteine	70b3f4ded5	Pins error message	2019-09-05 15:44:13 -05:00
Scott Lahteine	7496e1cd67	whitespace	2019-09-04 21:55:41 -05:00
George Fu	8e044ea898	Fix up Fysetc configs, pins. Fix menu type `float5`. (#15157 )	2019-09-04 13:06:23 -05:00
thisiskeithb	d577b3c21e	Fix MKS SGEN-L Pins (#15153 )	2019-09-03 20:02:30 -05:00
Scott Lahteine	75efa3cdac	Reorganize HAL (#14832 )	2019-09-02 19:49:58 -05:00
thisiskeithb	59152f2671	Flash-based EEPROM on SKR Mini E3 DIP (#15128 )	2019-09-02 02:42:11 -05:00
Scott Lahteine	34b73426e5	Apply #ifdef/#ifndef where possible	2019-09-01 23:54:50 -05:00
Scott Lahteine	4078f2672e	Apply shorthand option macros	2019-09-01 23:43:48 -05:00
weakset	ee240d21b9	Use Flash-based EEPROM on SKR mini-E3 (#15126 )	2019-09-01 04:04:40 -05:00
Scott Lahteine	8196ced2de	Leave LCD_PINS_Dn defined for other uses Fix #14998	2019-08-29 00:57:20 -05:00
Scott Lahteine	1d8ad7cf71	Safe changes from HAL cleanup	2019-08-28 21:21:47 -05:00
ETE-Design	9d12788a9a	ADIMLab Gantry - Spelling Correction (#15043 )	2019-08-25 20:51:06 -05:00
Scott Lahteine	7183a586d9	Add EZBOARD PT100 pin	2019-08-25 04:31:00 -05:00
Scott Lahteine	09ee5a5da1	Merge remote-tracking branch 'upstream/bugfix-2.0.x' into bf2_granty_fix_15017	2019-08-23 23:45:37 -05:00
ManuelMcLure	9c87786464	Change default Re-ARM UART pin order (#15037 )	2019-08-23 20:55:41 -05:00
Scott Lahteine	fdef32ce77	Shorten Website URLs	2019-08-22 19:37:04 -05:00
Scott Lahteine	6429b8bfb8	Fix EZBoard platform test	2019-08-22 17:38:32 -05:00
Tanguy Pruvot	e604f76703	Enable contrast via LCD_CONTRAST_INIT (#15006 )	2019-08-21 18:56:39 -05:00
ETE-Design	9d8e3d4d6f	Update pins_HJC2560C_REV2.h	2019-08-21 17:38:08 +02:00
ETE-Design	0309a5f3af	Update pins_HJC2560C_REV2.h Updated Description	2019-08-21 16:30:08 +02:00
ETE-Design	4be98221f6	ADIMLab Granty pins/config (#14919 )	2019-08-21 05:33:17 -05:00
Scott Lahteine	f7aac7a5b0	Add Support for ADIMLab Granty	2019-08-21 05:26:38 -05:00
ETE-Design	de122c9bbe	# This is a combination of 18 commits. # This is the 1st commit message: Add Support for ADIMLab Granty # The commit message #2 will be skipped: # Update Configuration.h # The commit message #3 will be skipped: # Add files via upload # # Add Support for ADIMLab Granty # The commit message #4 will be skipped: # Create Configuration.h # The commit message #5 will be skipped: # Delete Configuration.h # The commit message #6 will be skipped: # Create Test.h # The commit message #7 will be skipped: # Add files via upload # The commit message #8 will be skipped: # Delete Test.h # The commit message #9 will be skipped: # Delete Configuration.h # The commit message #10 will be skipped: # Delete Configuration_adv.h # The commit message #11 will be skipped: # Add files via upload # # Add ADIMLab Pins # The commit message #12 will be skipped: # Add files via upload # # Add Bootscreen # The commit message #13 will be skipped: # Update Configuration.h # # Add Bootscreen # The commit message #14 will be skipped: # Update pins.h # # Add ADIMLab Board # The commit message #15 will be skipped: # Update boards.h # # Add ADIMLab Granty # The commit message #16 will be skipped: # Update Makefile # # Add ADIMLab Granty # The commit message #17 will be skipped: # Update boards.h # The commit message #18 will be skipped: # Update Makefile	2019-08-21 05:25:00 -05:00
Scott Lahteine	4581957d93	Clean up some pins	2019-08-21 05:15:48 -05:00
Scott Lahteine	0cc524b84f	Prevent BOARD_NAME conflict with env	2019-08-20 19:10:36 -05:00
InsanityAutomation	6039893981	Creality pins updates (#14979 )	2019-08-20 03:42:30 -05:00
MaukCC	8664b8e97b	Adding HMS434 machine (#14931 )	2019-08-20 03:40:48 -05:00
Scott Lahteine	5c6e82743e	Followup to STM32F407	2019-08-20 03:11:34 -05:00
chzj333	0b47558a09	New board STM32F407 (#14994 )	2019-08-20 03:05:12 -05:00
thisiskeithb	19e21a8f10	Wanhao Duplicator i3 Mini config updates (#14908 )	2019-08-20 02:38:31 -05:00
Marcio Teixeira	274934ad81	Add LULZBOT_TOUCH_UI (#14967 )	2019-08-16 18:34:13 -05:00
Tanguy Pruvot	4cc103958e	Alfawise Flash EEPROM, Z Servo Probe (#14877 )	2019-08-13 23:41:17 -05:00
Scott Lahteine	a26b57a36d	Minor pins cleanup	2019-08-13 19:40:08 -05:00
Timothy Hoogland	a67830bf67	TH3D EZBoard is LPC1769 (#14936 )	2019-08-13 00:03:42 -05:00
Tanguy Pruvot	c6be989fca	Store EEPROM config in flash (#14923 ) Avoid confusion between the 2 possible SDs...	2019-08-12 19:48:46 -05:00
Giuliano Zaro	f085199f5b	SAMD51: Some LCD pin fixes (#14915 )	2019-08-10 19:19:52 -05:00
Eric Ptak	9c5086e6af	[STM32F1] Simpler Flash EEPROM (#14829 )	2019-08-10 19:14:31 -05:00
Robby Candra	d2d71caa3b	Clean up Touch pins. Better up/down touch response. (#14900 )	2019-08-10 01:42:52 -05:00
Giuliano Zaro	3129fd06f0	SAMD51: Update LCD pins (#14907 )	2019-08-10 00:56:55 -05:00
Scott Lahteine	a0d782e46e	STM32F7xx is gone	2019-08-06 04:58:58 -05:00
Scott Lahteine	fd9f067a48	Robin FSMC / SPI pins	2019-08-06 04:57:49 -05:00
Scott Lahteine	a9c5d524bb	Followup to MAX7219 / KILL_PIN patch Co-Authored-By: Roxy-3D <roxy-3d@users.noreply.github.com>	2019-08-05 21:42:33 -05:00
Roxy-3D	6fdb0bec07	Resolve Kill pin & Max7219 Clock conflict on TREX-2+	2019-08-05 14:36:50 -05:00
Scott Lahteine	4e58f9387a	Onboard SD for MKS Robin In response to #9771	2019-08-04 21:17:45 -05:00
Tim Moore	e3660bca25	Overlord printer thermistor (#14815 )	2019-08-03 20:57:56 -05:00
George Fu	f89eb8bf35	Fysetc Cheetah updates (#14800 )	2019-08-03 18:12:35 -05:00
Scott Lahteine	2e27e3ba04	Patch up Teensy 3.1/3.2 pins, tests	2019-08-02 10:01:55 -05:00
Ludy	337361d588	Update German language, (c) (#14804 )	2019-08-02 09:21:28 -05:00
Scott Lahteine	8119e511a1	Patch some (c) messages	2019-08-02 07:47:33 -05:00
yangwenxiong	6132cf900b	STM32F4x SD-based settings storage (#14808 )	2019-08-02 07:40:27 -05:00
Scott Lahteine	e85eca2630	HAL cleanup, Teensy 3.1 platform	2019-08-02 07:22:26 -05:00
Tim Moore	940c59d9da	Overlord i2c LCD with LEDs and buzzer (#14801 )	2019-08-02 06:19:45 -05:00
Scott Lahteine	9ac348ef7b	SDPOWER => SDPOWER_PIN	2019-08-02 02:24:15 -05:00
Tim Moore	3765e67434	Dreammaker Overlord pins (#14791 )	2019-07-31 21:15:36 -05:00
Scott Lahteine	c2b319360d	Remove extra pragmas	2019-07-30 20:19:47 -05:00
pinchies	d98b9d54f1	JGAurora A5S & A1 touch support (#14768 )	2019-07-30 17:08:11 -05:00
Scott Lahteine	bc58e678bd	More general FSMC display option	2019-07-30 04:25:55 -05:00
Scott Lahteine	eae543adf3	Apply HAS_SPI_LCD as needed	2019-07-29 18:55:05 -05:00
thisiskeithb	e8e81d3609	Fix MKS Robin Lite pins include (#14755 )	2019-07-28 14:56:05 -05:00
Giuliano Zaro	290466578f	Adafruit Grand Central M4 (#14749 )	2019-07-28 14:48:29 -05:00
Eric Ptak	59e97e5e52	FYSETC Cheetah 1.2 (#14723 )	2019-07-27 21:21:54 -05:00
InsanityAutomation	2351592abf	Overridable TMC serial pins, update TMC2209 docs (#14751 )	2019-07-27 20:34:22 -05:00
thisiskeithb	d74efd9d46	MKS Robin Lite/Lite2 Board Support (#14729 )	2019-07-27 04:43:37 -05:00
Bo Herrmannsen	bf610d87f7	Fix a bad MKS SGen-L pin (#14735 )	2019-07-27 04:18:49 -05:00
Giuliano Zaro	1005f225f3	Remove unused defines, fix typo (#14699 )	2019-07-21 21:44:03 -05:00
Scott Lahteine	f96d2a5b4a	Update pins_STEVAL.h	2019-07-21 21:25:14 -05:00
Tanguy Pruvot	dca0c3d02a	Fix SPI comments, clean up U20 pins (#14700 )	2019-07-21 20:23:41 -05:00
BigTreeTech	a38b9da672	STM32F1 SPI1 bugfix (#14679 )	2019-07-20 20:35:41 -05:00
Ludy	b714cfd4f0	MKS GEN v1.3/1.4 undef STAT_LED_*_PIN (#14644 )	2019-07-19 06:12:57 -05:00
Scott Lahteine	1ea9a36d11	FYSETC BLTouch config and more (#14668 )	2019-07-18 05:54:50 -05:00
Scott Lahteine	92e513e76e	Trailing whitespace	2019-07-18 05:51:36 -05:00
Msq001	6920b7fe91	BigTreeTech SKR E3 DIP (#14638 )	2019-07-18 05:43:49 -05:00
Karl Andersson	d472934a70	FYSETC Mini 12864 for HAL_STM32 (#14639 )	2019-07-18 05:42:16 -05:00
Scott Lahteine	3d153486da	Fysetc rename Part 2	2019-07-18 04:36:08 -05:00
Tanguy Pruvot	9dfa5ba3a5	XPT2046: Handle MKS touchscreen w/out PenIRQ pin (#14640 )	2019-07-17 04:41:10 -05:00
Scott Lahteine	06324df072	Apply some #ifndef	2019-07-17 03:14:44 -05:00
Ludy	abc9b52692	Update copyright in header, etc. (#14645 )	2019-07-16 22:42:36 -05:00
Tanguy Pruvot	81d629bc47	Robin & Longer3D SPI TFT driver (#14595 )	2019-07-14 18:16:26 -05:00
Tanguy Pruvot	45bde333d5	Initial Longer3D LK1/2 (Alfawise U20/U20+/U30) support (#14597 )	2019-07-14 18:05:24 -05:00
Jeonghwan Noh	475ccfad62	Oscar (by Thinknthings of Korea) board support (#14574 )	2019-07-14 15:36:03 -05:00
Scott Lahteine	fdaa374490	Clean up pins self-checks	2019-07-14 15:34:14 -05:00
Scott Lahteine	77b4f23edc	Update pins comments	2019-07-14 15:19:22 -05:00
Ludy	6dcb85927a	Update German language, &c. (#14613 )	2019-07-14 04:34:55 -05:00
Scott Lahteine	b2b7c583eb	Pins cleanup	2019-07-12 23:07:52 -05:00
Karl Andersson	82cafc9b19	pins_ARMED overrides STM32 defines (#14587 )	2019-07-12 06:06:04 -05:00
Ludy	70586d3a6c	Update (c) comments (#14584 )	2019-07-11 13:48:15 -05:00
Scott Lahteine	948c3f580b	Clean up some LCD conditions	2019-07-11 06:11:19 -05:00
Scott Lahteine	179095c387	Pins cleanup	2019-07-11 05:29:24 -05:00
thisiskeithb	42be684e69	Wanhao Duplicator i3 Mini support (#14559 )	2019-07-11 04:36:51 -05:00
Scott Lahteine	340d827dc1	Fix mega/ subfolder pins Followup to #14573	2019-07-11 02:59:02 -05:00
Scott Lahteine	7de605c5c3	Move pins files to subfolders #14573	2019-07-11 02:32:24 -05:00
Scott Lahteine	44c8f29e47	More board name cleanup	2019-07-10 05:54:15 -05:00
Ludy	a7bb1fc322	Fix Dual X,Y,Z UART pins in relation to TMC2208/9 (#14554 )	2019-07-09 22:52:48 -05:00
Scott Lahteine	5519054f50	Improve BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE (#13740 )	2019-07-09 21:35:07 -05:00
Scott Lahteine	3ae3bf5d33	Get E2END from pins, fix Linux buffer	2019-07-09 21:32:13 -05:00
Scott Lahteine	01e8813286	EEPROM_EMULATED_WITH_SRAM => SRAM_EEPROM_EMULATION	2019-07-09 21:31:33 -05:00
Scott Lahteine	cb60001784	Clean up BOARD_NAME in pins	2019-07-09 21:31:06 -05:00
gmarsh	ab99a80793	GMARSH X6 board support (#14550 )	2019-07-09 00:30:08 -05:00
Scott Lahteine	a2ba0aaaac	HAL include and other adjustments (#14525 )	2019-07-08 23:42:29 -05:00
Ludy	ba22857f93	Allow override of TMC_SW_* pins, etc.	2019-07-08 23:13:28 -05:00
Scott Lahteine	1a349c7522	Add HAS_TMC220x	2019-07-08 23:07:42 -05:00
Scott Lahteine	9821ec2afd	Fix SKR Pro pins, STM32F1/4 sanity-check Co-Authored-By: Msq001 <msq001@users.noreply.github.com>	2019-07-08 23:07:42 -05:00
Msq001	439e28783b	BigTree SKR Pro V1.1 board support (#14523 )	2019-07-06 21:52:17 -05:00
Ludy	3a75342508	Allow override of TMC_SW_* pins (#14528 )	2019-07-06 21:25:48 -05:00
Bob Kuhn	dc02d0720d	Pins Debugging for STM32 — NEEDS TESTING (#14309 )	2019-07-05 22:08:06 -05:00
Alexander Amelkin	7a42132002	GTM32 Pro pins updates (#14505 )	2019-07-05 21:09:17 -05:00
thisiskeithb	10a71e332d	Biqu SKR 1.1 => BigTree SKR 1.1 (#14514 )	2019-07-05 20:57:08 -05:00
Scott Lahteine	fe02241044	NONE on combined options	2019-07-05 18:20:24 -05:00
Scott Lahteine	b6546ea33a	Add include guards to some headers	2019-07-05 04:02:08 -05:00
Tanguy Pruvot	31450d9d6b	M43: spi channels are not pins (#14502 )	2019-07-05 02:03:01 -05:00
Tim Moore	eb6dec03bd	Simplify power supply naming logic (#14488 ) Co-Authored-By: Tim Moore <tim.moore@lightbend.com> Co-Authored-By: AnHardt <github@kitelab.de>	2019-07-05 01:58:34 -05:00
Scott Lahteine	1620738701	Home dir use < or >	2019-07-02 20:51:33 -05:00
Scott Lahteine	0f79fb9821	Generic stop pins (presume one endstop per axis end)	2019-07-02 20:30:26 -05:00
thisiskeithb	c6f74ba887	TH3D EZBoard v1.0 (#14473 )	2019-07-02 03:12:32 -05:00
Msq001	c9be936d4a	BigTreeTech SKR Mini E3 (#14457 )	2019-07-01 07:06:25 -05:00
Ludy	dab2f0c89c	Mask unused var, update (c) comments (#14455 )	2019-06-30 22:29:33 -05:00
thisiskeithb	6978bb5ea5	Fix MKS Robin Nano FAN_PIN (#14444 )	2019-06-29 02:11:26 -05:00
Scott Lahteine	49027721e9	Clean up some pinsDebug headers	2019-06-28 22:50:56 -05:00
Giuliano Zaro	07c998afe5	Fix E2END on RURAMPS (#14438 )	2019-06-28 18:55:17 -05:00
Scott Lahteine	4d5a1984e2	Simplified fan handling code	2019-06-28 18:50:32 -05:00
Scott Lahteine	93cd66ac11	Tweaky change from (C) to (c)	2019-06-27 23:58:16 -05:00
Scott Lahteine	d7d80418ae	Singleton for cutting tools (#14429 )	2019-06-27 23:06:49 -05:00
Scott Lahteine	2fde1475cb	Allow SD card sharing on SKR Mini	2019-06-27 22:30:13 -05:00
Scott Lahteine	7e16835c83	Use LCD conditionals in pins files (#14428 )	2019-06-27 22:14:43 -05:00
thisiskeithb	8b63e3701f	MKS Robin Nano board support (#14363 )	2019-06-27 21:33:41 -05:00
thisiskeithb	cd302f9464	Add MKS SGen-L Board (#14411 )	2019-06-26 04:17:06 -05:00
Andy Shaw	064177154c	Update SD card connection / sharing options (#14325 )	2019-06-26 03:55:57 -05:00
Msq001	e3846ec7a1	SKR mini can use 128x64 LCD (#14388 )	2019-06-26 01:12:41 -05:00
Eric Ptak	8934b32f1b	Fysetc AIO II / Cheetah STM32F1 (#14407 )	2019-06-26 00:40:29 -05:00
thisiskeithb	a4aa3621c0	MKS Robin Mini Board Support (#14366 )	2019-06-24 03:42:22 -05:00
thisiskeithb	71b2700c3c	Anycubic Trigorilla 1.4 Rev. 1.1 (#14357 )	2019-06-22 17:53:45 -05:00
Scott Lahteine	4df4c47994	Add TMC2209 support (#14249 )	2019-06-20 15:47:50 -05:00
Tanguy Pruvot	75aeb41ab7	SKRmini support for Fysetc Mini Panel (#14319 )	2019-06-18 19:34:16 -05:00
3DSmitty	5b13abcacb	Fix SPI_SD Outside of HAL_STM32F1 (#14306 )	2019-06-18 02:38:18 -05:00
Scott Lahteine	651f3eeed0	Clean up trailing whitespace	2019-06-17 20:22:07 -05:00
3DSmitty	66d51272af	Fix SPI, SD for BIGTREETECH SKR Mini (#14287 )	2019-06-15 18:12:05 -05:00
pinchies	3021097888	Add JGAurora A5S and A1 (STM32F103ZET6) (#14291 ) - Now compiles and works correctly with changes to HAL timers and watchdog. - Does NOT include awesome work on touch screen function. - Does have working LCD and SD-based EEPROM.	2019-06-15 14:28:22 -05:00
mb300sd	bf8bfb5c66	Add Coolant Control M7/M8/M9 (#10745 )	2019-06-13 18:43:11 -05:00
Aliaksei Kvitsinski	648a91bce8	Support for Z-Bold board (#14024 )	2019-06-13 03:21:18 -05:00
felixstorm	9439fab7fd	Fix ESP32 servos, platformio.ini, etc. (#14247 )	2019-06-10 23:22:19 -05:00
yangwenxiong	b0a4ea79b8	BigTreeTech SKR Mini v1.1 (#14041 )	2019-06-10 21:10:51 -05:00
mikeshub	a3f034b95e	FFCP updates. Update XY soft endstops on tool_change (#14125 )	2019-06-10 18:01:42 -05:00
Scott Lahteine	9206c0e869	Use limit switch overrides	2019-06-05 22:27:06 -05:00
Scott Lahteine	34d2801bbe	Rename pins file (2)	2019-06-05 21:41:58 -05:00
Scott Lahteine	fa3b5fb059	Uppercase pins filename	2019-06-05 21:41:58 -05:00
InsanityAutomation	bbcb61e042	Initial Commit - Add board	2019-06-03 23:49:19 -04:00
Scott Lahteine	81cee05476	Update some env in pins.h	2019-05-25 23:17:50 -05:00
felixstorm	bc5a1fe562	Various fixes for ESP32 (#14102 )	2019-05-25 17:06:00 -05:00
Giuliano Zaro	e1bf34bdc9	Ruramps4d typo fix (#14096 )	2019-05-25 16:41:08 -05:00
Ludy	fafd73a3af	Update copyright in headers (#14092 )	2019-05-22 16:24:13 -05:00
Scott Lahteine	9b5f9dda0e	Update analog pins labels	2019-05-17 20:22:25 -05:00
InsanityAutomation	07afe69cee	Fix some bad AZTEEG_X5_MINI pins (#14011 )	2019-05-16 20:33:00 -05:00
Bob Kuhn	48bd8899bd	Cohesion 3D Remix: Onboard SD card, Fysetc LCD (#13991 )	2019-05-15 00:59:57 -05:00
Bob Kuhn	75eca5c4f8	Fysetc pins updates for RAMPS and SKR 1.3 (#13963 )	2019-05-10 19:29:28 -05:00
doggyfan	23a8707ef1	Configurable Thermistor (#13888 )	2019-05-06 18:51:06 -05:00
J.C. Nelson	172abc305b	Malyan M200 core fixes (#13927 )	2019-05-06 18:07:13 -05:00
Robert Mendon	24177954dd	Add missing AZSMZ Mini SPI pins (#13824 )	2019-05-04 22:04:01 -05:00
Bob Kuhn	c48e6be366	Fysetc panel, RUMBA and ReARM pins, SPI mode 3 (#13900 )	2019-05-04 17:59:36 -05:00
Chris	fd9d3ae181	Re-Arm 4x TMC2208 stepper improvement (#13819 )	2019-05-04 17:26:13 -05:00
Scott Lahteine	e7682eea42	Use Arduino.h include wrapper (#13877 )	2019-05-02 00:45:50 -05:00
Scott Lahteine	bf54251a10	Finish, improve, clean up FYSETC_MINI_12864 revisions (#13871 )	2019-05-01 20:05:29 -05:00
Scott Lahteine	e43afb1a58	Clean up SKR pins	2019-04-27 14:56:12 +02:00
Scott Lahteine	63f6ad3fd2	Basic RAMPS SD_DETECT_PIN override	2019-04-23 18:10:21 -05:00
Bob Kuhn	81ca5a4cd4	Fix and improve FYSETC LCD support (#13767 )	2019-04-21 20:48:53 -05:00
felixstorm	4e35e6c705	Fix SS pin in ESP32 HW SPI (#13781 )	2019-04-21 17:15:15 -05:00
jmdearras	b65cb5704d	Fix, improve FYSETC_MINI_12864 support (#13730 )	2019-04-19 20:11:51 -05:00
Scott Lahteine	69c333ead9	More universal Formbot pins Replace `ROXYs_TRex` with pre-defines of the relevant pins at the configuration level.	2019-04-18 21:09:34 -05:00
jmdearras	5f49b65c1f	Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards (#13712 )	2019-04-15 22:55:33 -05:00
Bob Kuhn	9b578ca343	Support FYSETC_MINI_12864 on Re-ARM, RAMPS_FD, MKS SBASE (#13717 )	2019-04-15 22:54:11 -05:00
Laurent	df75a606ff	Support MKS SGen board (#13694 )	2019-04-15 17:03:10 -05:00
InsanityAutomation	aa0f7afbe6	Fix call to uninitialized PWM pin, heater 2 overlap (#13674 )	2019-04-15 15:57:34 -05:00
ManuelMcLure	492883859e	Don't protect unused CS pins (#13647 )	2019-04-10 21:57:57 -05:00
ANMay-ru	052f2ac352	Fix RURAMPS4D baud rate (#13644 )	2019-04-10 15:53:21 -05:00
klcjr89	a8edd4f6d4	Fix Azteeg X5 MINI BOARD_NAME (#13632 ) Co-Authored-By: klcjr89 <klcjr89@users.noreply.github.com>	2019-04-10 15:46:12 -05:00
Scott Lahteine	5018fdacbe	Support FYSETC_MINI_12864_PANEL (#13365 )	2019-04-09 18:34:29 -05:00
InsanityAutomation	ba31d39f6d	Azteeg X5 Mini support (#13425 )	2019-04-08 23:10:45 -05:00
Scott Lahteine	0e3c9e726d	Set default Raptor runout/caselight pins	2019-04-08 18:18:08 -05:00
Scott Lahteine	c8a83fb122	SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA	2019-04-08 18:13:41 -05:00
Bob Kuhn	9a56d90150	Fix M43 on LPC176x (#13587 ) The real fix. PR #13568 was wrong.	2019-04-06 18:06:07 -05:00
Alexander Gavrilenko	3c47e1b4d1	Support Black STM32F407VET6 with RAMPS-like shield (#13524 )	2019-04-05 15:30:19 -05:00
drzejkopf	b1f739e27b	CR10_STOCKDISPLAY support in Bigtreetech SKR (#13516 )	2019-03-29 14:19:18 -05:00
Alexander Amelkin	e40636a7c1	Replace digitalPinHasPWM with HAS_TIMER (#13520 )	2019-03-29 12:21:14 -05:00
Yannik Sembritzki	0d3ea59bcf	Add pins for Dual Z UART on SKR 1.3 (#13474 ) Fix #13470	2019-03-24 20:09:00 -05:00
Scott Lahteine	144018736a	Use USES_Z_MIN_PROBE_ENDSTOP	2019-03-18 16:58:31 -05:00
InsanityAutomation	5b2c37d6c1	Followup to BLTouch (#13422 )	2019-03-18 16:31:11 -05:00
Scott Lahteine	b376c7e374	Group DISABLED items	2019-03-17 07:56:35 -05:00
Scott Lahteine	49cf92dc36	Extended condition macros (#13419 ) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) \|\| PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`	2019-03-16 23:43:06 -05:00
Scott Lahteine	ad8b82d054	Fix KILL_PIN assignment for MKS_MINI_12864 According to #13397	2019-03-15 19:20:40 -05:00
Scott Lahteine	4555ae448f	Fixups for ESP32	2019-03-13 05:32:33 -05:00
Scott Lahteine	fa11427ec6	Remove obsolete LCD_CONTRAST	2019-03-11 03:33:07 -05:00
Marcio Teixeira	00fc43144a	Follow up fixes to various PRs. (#13334 ) - Ensure `MarlinUI:get_progress` is defined for `ExtUI`. - Fix for `BACKLASH_SMOOTHING` with small segments. `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments. - Add pinout for the beta revision `EINSY_RETRO`. - Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)	2019-03-09 14:20:37 -06:00
Scott Lahteine	44571775bd	Further support for 6 extruders	2019-03-07 01:00:56 -06:00
Scott Lahteine	893ee68b52	Clean up trailing whitespace	2019-03-06 01:02:43 -06:00
Tobias Frost	56fdcf93d1	Disallow SD_DETECT_INVERTED with FYSETC F6. (#13307 )	2019-03-05 06:45:28 -06:00
Scott Lahteine	d71dc5cf42	Fix for Ender 4 fan/case light pin See #12731	2019-03-03 07:43:27 -06:00
Anthony Rich	7640b328df	Support for Tronxy X5S 2e (#13297 )	2019-03-03 07:41:05 -06:00
Scott Lahteine	fa0d909dd3	Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3 See #13267	2019-03-03 00:27:47 -06:00
Vasily Evseenko	71773b128d	Fix stepper use before init. Add Ultimaker2+ Extended clone config (#13284 )	2019-03-02 17:29:02 -06:00
Scott Lahteine	2f1e1dcb42	Gradual step towards EXTRUDERS 0 support	2019-03-01 01:51:24 -06:00
Scott Lahteine	99d0022fae	Drop the Z_MIN_PROBE_ENDSTOP option (#13276 )	2019-03-01 00:27:45 -06:00
Msq001	5b7ad3a5a0	Fix SKR onboard TF card CS pin (#13272 )	2019-02-28 19:41:19 -06:00
Msq001	f8a39919fa	Add Bigtree SKR 1.3 board (#13267 ) Co-Authored-By: Msq001 <msq001@users.noreply.github.com>	2019-02-26 21:30:00 -06:00
Bob Kuhn	ddbe4cfa20	Printrboard G2 support (#13116 )	2019-02-26 21:03:13 -06:00
Scott Lahteine	a79b9bbe6b	Cleanup whitespace, add a const	2019-02-26 17:49:14 -06:00
Chris Pepper	88cc1d1a31	Fix Preprocessor syntax in Re-ARM pins file (#13247 )	2019-02-24 01:36:58 +00:00
Scott Lahteine	15aa932aa6	HAL for Linux (#13146 )	2019-02-22 19:09:10 -06:00
kwalters3	5eb82ca6a8	Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C (#13223 )	2019-02-22 19:08:36 -06:00
Thomas Moore	9f5e4e5ad8	Update LPC1769 Pins Files (#13183 )	2019-02-21 00:54:05 -06:00
Greg Nutt	608a6810e7	Fix DOGLCD_A0 pin in pins_Smoothieboard.h (#13217 )	2019-02-20 18:08:49 -06:00
Scott Lahteine	44c22e3935	Provide a default MAX6675_SS_PIN for ReARM See #8010	2019-02-20 05:06:06 -06:00
InsanityAutomation	33a6d52965	Fix a RAPTOR2 pin conflict (#13205 )	2019-02-19 14:42:02 -06:00
Scott Lahteine	18458ec42b	Error in Smoothieboard for unsupported display	2019-02-19 14:17:33 -06:00
Andy Shaw	84fc400aba	Update BIQU SKR V1.1 pins, add TMC2130 settings (#13166 ) * Remove untested displays add TMC2130 configs. * Remove references to the ReARM, delete untested displays. Add TMC2130 settings. Cleanup spacing, etc.	2019-02-14 16:43:56 -06:00
Scott Lahteine	7cf9b93f26	Add HAS_FILAMENT_SENSOR ahead of 12962	2019-02-12 20:13:20 -06:00
Scott Lahteine	0feeef2604	Update copyright in headers	2019-02-12 15:30:11 -06:00
Simon Jouet	5cd0fa3ce1	Basic GPIO expander using the ESP32 I2S peripheral (#12959 )	2019-02-10 05:40:31 -06:00
Scott Lahteine	43b29c093b	Update pinsDebug_list.h with XY PWM pins	2019-02-10 05:13:05 -06:00
Scott Lahteine	95d3f3953a	DEFAULT_WEBSITE_URL => BOARD_WEBSITE_URL	2019-02-08 14:54:34 -06:00
Scott Lahteine	870757aa17	Tweaks to pins_GT2560_V3.h	2019-02-04 22:52:50 -06:00
Psycho	3c88cac2e9	Velleman Vertex Delta pins (#13072 )	2019-02-04 00:15:08 -06:00
Scott Lahteine	ca1be02bf0	Tweak some pins formatting	2019-02-04 00:06:41 -06:00
InsanityAutomation	68bbac207e	Update pins_FORMBOT_TREX3.h (#13058 )	2019-02-01 18:06:02 -06:00
raTmole	988b5aa4e6	Update GT2560 V3 pins (#13036 )	2019-01-30 21:10:56 -06:00
Scott Lahteine	159d7eefda	New boards entry for the A20M	2019-01-28 21:08:20 -06:00
Thomas Moore	02ab66fca3	Update Cohesion3D Pins Files (#13027 )	2019-01-27 23:11:33 -06:00
Scott Lahteine	0f07ba4f09	Tweak some comments	2019-01-23 20:18:13 -06:00
Bob Kuhn	7c1a5e3c47	Fix TEMP_TIMER in pins_STEVAL.h (#12994 )	2019-01-23 19:34:39 -06:00
Bob Kuhn	2f35747f29	L6470 SPI daisy chain support (#12895 )	2019-01-23 19:06:54 -06:00
Scott Lahteine	6453b82a5e	Clean up trailing whitespace	2019-01-23 15:57:01 -06:00
Gert-Jan Rodenburg	bb30927549	Fix pins for ZONESTAR_LCD with Zonestar ZRIB (#12956 )	2019-01-20 23:52:51 -06:00
lanserge	c2cf8ffa82	Add support for Arduino DUE Shield Kit (#12950 )	2019-01-19 23:43:32 -06:00
chrisly42	99e5e8362f	Rapide Lite 200 config, pins_RL200 RUMBA clone (#12848 )	2019-01-19 20:19:14 -06:00
Scott Lahteine	6411680364	Update some pins spacing	2019-01-19 19:21:52 -06:00
Scott Lahteine	712e23c383	Fix up some whitespace	2019-01-17 18:05:36 -06:00
Bob Kuhn	d08f27e27b	Add support for STEVAL 3DP001V1 (#12894 )	2019-01-15 18:59:36 -06:00
mikeshub	7fde8d9d1e	Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855 ) - Fix a bug in MAXxxxx thermocouple temp reporting. - Add support for 3-wire HD44780. - Add support for PCA9533 RGB driver. - Add configuration examples for FlashForge CreatorPro.	2019-01-14 14:29:55 -06:00
Chris Barr	1d33784bf9	Add RUMBA32 Board (#12856 )	2019-01-10 19:34:31 -06:00
Karl Andersson	8ae6f1e556	Fix errors and some compiler warnings with HAL_STM32 PlatformIO build (#12869 )	2019-01-10 19:01:31 -06:00
jmz52	d372e7e477	SDIO support for STM32F1 (#12782 )	2019-01-04 13:38:07 -06:00
luxflow	7f244f9b9c	Update LPC SD pins for BIQU SKR (#12767 ) (Exactly matching the Azteeg X5 MINI Wifi)	2019-01-03 10:44:00 -06:00
jmz52	813a4ea107	Add support for Mks Robin TFT display (#12706 ) * Add support for MKS Robin TFT display - Add support for MKS Robin TFT display and encoder for MKS Robin board. - Generic 128x64 UI with x2 upscale is used (for now). - Tested on MKS Robin TFT V2.0 with ST7789V controller.	2019-01-03 10:38:39 -06:00
Scott Lahteine	2aaa681dea	Remove unused Cheaptronic pins	2019-01-03 08:58:55 -06:00
Ludy	74c47803f7	Add VORON printer (#12705 )	2019-01-03 06:27:03 -06:00
petieken	d9cf5e4883	Update pins_BIQU_SKR_V1.1.h (#12758 )	2019-01-02 13:50:05 -06:00
Scott Lahteine	371d9a1acf	Fix line-endings, formatting, whitespace Followup to #12770	2018-12-30 15:38:20 -06:00
Alain Martel	44ed34475b	Add MKS BASE 1.4 pins (#12770 )	2018-12-30 10:40:22 -06:00
Msq001	f8c5d31864	Bugfix 2.0.x add motherboard pins define (#12689 ) - `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer. - `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.	2018-12-27 10:52:35 -06:00
InsanityAutomation	b7a8dcc35d	Update Formbot T-Rex 3 pins (#12662 )	2018-12-20 17:32:39 -06:00
Ludy	f7127c44f8	Wanhao Duplicator i3 Plus pins create (#12701 )	2018-12-20 17:30:36 -06:00
jmz52	33abb86b7e	Add support for MKS Robin board (#12650 ) Implement initial support for MKS Robin (STM32F103ZET6) board. Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).	2018-12-20 17:23:27 -06:00
Ludy	33f3c75213	GTM32 Pro VB FAN-PIN correction (#12666 )	2018-12-20 16:42:15 -06:00
Ludy	3829d6ccf8	FYSETC F6 13 - E2_SERIAL_TX_PIN correction (#12667 )	2018-12-20 16:11:33 -06:00
Kadah	d35dcafa3d	Added MKS MINI 12864 support to FYSETC F6 V1.3 (#12656 )	2018-12-20 16:10:49 -06:00
Ludy	97de9d54a5	Fix broken pins file include (#12617 )	2018-12-09 19:06:03 -06:00
Scott Lahteine	6cf8d40f41	Fix some serial echos of pin states	2018-12-09 02:38:32 -06:00
Scott Lahteine	7d15854514	Add Z_MIN_PROBE_PIN to MKS SBASE pins	2018-12-08 15:31:59 -06:00
teemuatlut	50b2fbd031	Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582 )	2018-12-07 15:34:21 -06:00
Scott Lahteine	3c58b16c9f	Move stepper enable/disable to stepper_indirection.h (#12562 )	2018-11-30 12:48:46 -06:00
Scott Lahteine	c986239837	A single SERIAL_ECHO macro type (#12557 )	2018-11-29 16:58:58 -06:00
InsanityAutomation	dec721c52b	Add Formbot Raptor2 and Raise3D pins (#12532 ) * Add Formbot Raptor2 board * Add Raise3D Rumba board	2018-11-25 19:56:06 -06:00
Scott Lahteine	0a638cc022	Adjust Formbot Raptor pins	2018-11-25 18:35:45 -06:00
Marcio Teixeira	7109dadd21	Additional pin definitions for Archim 2 (#12500 ) - Added GPIO pins to Archim 2 - Added new 108 pin to `fastio_Due.h`	2018-11-22 01:07:02 -06:00
Scott Lahteine	b738972e69	General cleanup of Re-ARM pins	2018-11-21 19:00:49 -06:00
Ludy	1f93d2bcf7	Fix LCD compile error, etc. (#12472 )	2018-11-18 20:39:49 -06:00
Scott Lahteine	9d13f07d09	GTM32 Pro VB changes from Markku Sinisalo	2018-11-18 19:56:38 -06:00
Nils Hasenbanck	779b2709ec	Change temperature pin order for RemRam V1 (#12458 ) Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.	2018-11-17 16:51:06 -06:00
Ph0non	984c4ba8c7	Enable SD Card on RepRap Display and RADDS (#12446 ) * Enable SD Card on RepRap Display and RADDS Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.	2018-11-17 06:59:40 -06:00
Mateusz Krawczuk	ca21ac6b9b	Support two MAX6675 thermocouples (#8686 )	2018-11-16 18:20:33 -06:00
Scott Lahteine	edfd106bc5	Rejigger Filament Runout class (#12428 )	2018-11-14 11:45:57 -06:00
Scott Lahteine	f4c128ecaa	Move RRW keypad code to a common method (#12429 )	2018-11-14 06:00:21 -06:00
Scott Lahteine	ebf585b673	Fix an old sanity check	2018-11-14 01:15:35 -06:00
Ryan	052d102ded	UltiMachine Archim 1 support (#12404 )	2018-11-14 00:27:39 -06:00
Scott Lahteine	664e20754d	Clean up pins files	2018-11-14 00:23:33 -06:00
Scott Lahteine	4ed6397e5d	More comprehensive NO_LCD_MENUS (#12367 )	2018-11-09 00:07:16 -06:00
Scott Lahteine	9c8f083d6c	Extend pins errors to include the processor	2018-11-08 22:25:59 -06:00
Scott Lahteine	147e270208	Restore GTM32_PRO_VB temp and heater pins Undo #12345	2018-11-06 21:41:30 -06:00
Phr3d13	a813900fce	Add Geeetech Rostock 301 config, update GTM32 Pro VB pins (#12345 )	2018-11-05 22:42:06 -06:00
Scott Lahteine	c536ee1122	Clean up bq Zum Mega 3D pins	2018-11-05 22:38:20 -06:00
Scott Lahteine	0c85869c26	Clean up file endings	2018-11-04 18:30:10 -06:00
Scott Lahteine	3c21483c88	Provide DOGLCD SPI pins for MKS SBASE + VIKI	2018-11-04 16:20:22 -06:00
Scott Lahteine	9c0e05552e	Suppress some compile warnings	2018-11-04 15:25:31 -06:00
Karl Andersson	176654791e	Use board-specific or platform SPI pins in HAL_STM32 (#12323 )	2018-11-04 15:03:45 -06:00
Scott Lahteine	608be966d7	Add servos to pins_FYSTEC_F6_13.h	2018-11-04 06:10:35 -06:00
InsanityAutomation	ad60f0691c	Add Creality3D RAMPS pins definitions (#12229 )	2018-10-26 16:09:04 -05:00
Scott Lahteine	5580773191	Use FastIO, sanity-check LPC SD options, apply formatting (#12231 )	2018-10-26 15:23:02 -05:00
Hannes Brandstätter-Müller	6ee2af5e2d	Simplify pins_TRIGORILLA_14.h (#12162 )	2018-10-21 03:23:20 -05:00
Scott Lahteine	b381cad399	Clean up trailing whitespace	2018-10-19 15:27:17 -05:00
Karl Andersson	4eb798dbdc	Add support for Arm'ed (STM32F4) board (#12147 )	2018-10-19 14:50:52 -05:00
Scott Lahteine	a81763c237	Pins E sanity check tweak	2018-10-18 18:48:23 -05:00
Michael Triffon	eded90bf87	Updated Azteeg X5 Mini Wifi pins for onboard SD (#12133 )	2018-10-18 11:52:55 -05:00
Chris Pepper	3c13c9e3e9	[LPC176x] Fix USEABLE_HARDWARE_PWM macro, cleanup multiple LED support (#12129 )	2018-10-18 11:26:50 -05:00
Nils Hasenbanck	0519ef0802	Update pins for final RemRam v1.3 board (#12125 )	2018-10-17 11:13:38 -05:00
Karl Andersson	8b5e51c9aa	STM32F4xx modifications for HAL_STM32 (#12080 )	2018-10-16 06:42:41 -05:00
Christopher Pepper	42fb7c14b0	Update the sdcard usb sharing config and apply to Re-ARM	2018-10-14 18:43:48 +01:00
Andy Shaw	870bfd08f5	usb and sdcard sharing improvements * Add traceback after watchdog timeout Add the cpability to perform a traceback following a watchdog timeout. * Enhanced hardware SPI Allow use of either SSP0 or SSP1. Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware. * Make flash emulation of eeprom the default Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations. * Allow sharing of SD card SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus. New configuration options to allow usage of the SD card to be specified. * Fix problem with hardware SPI pins	2018-10-14 18:43:48 +01:00
Roxy-3D	25b980dddb	Remove erroneous Pin 12 definition There is no switchable Power Supply. Don't put it on Pin 12. (Pin 12 is actually FAN1)	2018-10-12 13:45:04 -05:00
Scott Lahteine	1407afad73	Move SENSITIVE_PINS to its own file	2018-10-11 01:10:11 -05:00
Scott Lahteine	45e738876a	Add stepper MS3 support Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>	2018-10-11 01:10:11 -05:00
Hannes Brandstätter-Müller	a3e8cb1e44	[2.0.x] Ender-4 small improvements in Configuration (#11843 )	2018-10-09 20:58:22 -05:00
Marcio Teixeira	ec9aa4f468	[2.0.x] Miscellaneous fixes (#12039 ) * Allow override of soft SPI pins in `pins_.h` Add default case to avoid compiler warning. * Additional pin definitions for Archim 2. * Einsy Retro has same timings as Einsy Rambo.	2018-10-08 18:14:52 -05:00
Marcio Teixeira	906a24fa81	Extensible user interface API (#11193 )	2018-10-08 15:44:05 -05:00
teemuatlut	c447d75916	Add support for TMC2660 (#11998 )	2018-10-06 17:18:10 -05:00
Scott Lahteine	0fcdfdeed6	Followup to #12017	2018-10-06 13:23:58 -05:00
Phr3d13	acac2adfc8	Add support for MeCreator2 (#12017 )	2018-10-06 12:26:49 -05:00
Scott Lahteine	1358bd9319	Make MAX_EXTRUDERS always 6	2018-10-03 11:32:19 -05:00
Scott Lahteine	348004c34f	STM32F7 HAL using the official STM32 Arduino Core (#11750 )	2018-10-03 03:26:07 -05:00
Scott Lahteine	11ac75edcb	Use PGM_P for PSTR pointers (#11977 )	2018-09-30 23:44:33 -05:00
Mitch Roote	d016b572e3	[2.0.x] Add pin configuration for Fysetc F6 (#11932 )	2018-09-27 19:20:19 -04:00
Victor Tseng	eeab4141db	[2.0.x] Anycubic Trigorilla 14 pins tweak (#11869 )	2018-09-27 16:06:21 -04:00
InsanityAutomation	cb9dc56630	Add GT2560 v3 support (#11914 )	2018-09-27 15:13:15 -04:00
Scott Lahteine	cee34f7290	Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916 )	2018-09-24 21:46:56 -04:00
InsanityAutomation	1104054d73	2.0 IDEX Independent z offset and other fixes (#11862 ) * Add Formbot Raptor board Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com> * Add a second Z probe Z offset Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com> * Modify method to utilize live adjustment of hotend z offset Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems * Move config item and catchup other code to current method	2018-09-24 09:40:48 -05:00
Scott Alfter	140caf99b8	E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 (#11865 )	2018-09-18 22:24:20 -05:00

... 8 9 10 11 12 ...

1191 Commits