MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,891 Commits 1 Branch 0 Tags 96 MiB
0bfb10ffb6
Commit Graph

8217 Commits

Author SHA1 Message Date
Scott Lahteine
d429d5a4ae
Add M420 C to center the mesh on a value (#10521) 2018-04-25 06:43:59 -05:00
Scott Lahteine
21f5ca6ad4 Revert potentially-not-redundant UBL test 
Response to #10435
 2018-04-24 08:05:23 -05:00
Scott Lahteine
ad3b95c8ea Fix current_temperature_chamber compile error 
Fix #10505
 2018-04-24 07:53:45 -05:00
Scott Lahteine
50cc55d172 FastIO faster atomic bit write, fix TOGGLE 
Based on #10502

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-04-24 04:13:50 -05:00
Scott Lahteine
3eb55016e4 Finish AVR preemptive interrupt 
Followup to #10501
 2018-04-23 22:20:00 -05:00
Scott Lahteine
51004e003d
Proper AVR preemptive interrupt handling (#10501) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-04-23 20:47:31 -05:00
Scott Lahteine
0764981aa1 Fix compile for Malyan LCD 
Based on #10498

Co-Authored-By: xC0000005 <xc0000005@users.noreply.github.com>
 2018-04-23 16:51:29 -05:00
Scott Lahteine
b19d8182c1
Add HAS_HEATED_BED conditional (#10494) 2018-04-22 23:40:49 -05:00
Scott Lahteine
6b50a50676
Extra options for LEVEL_BED_CORNERS (#10484) 2018-04-22 02:30:20 -05:00
Scott Lahteine
29c9c723f8 Use 0 as the bed height for manual probing 2018-04-22 02:12:48 -05:00
Anton Piliugin
b49da0c4ba Update language_ru.h (#10482) 2018-04-22 00:24:14 -05:00
Scott Lahteine
58bd2a5e81
Merge pull request #10437 from thinkyhead/bf1_creality_power_loss_resume 
[1.1.x] Creality3D Power-Loss Recovery
 2018-04-22 00:17:27 -05:00
Scott Lahteine
6f176d1d64
[1.1.x] Reset LCD status to fallbacks (#10467) 
* Remove obsolete strings
* Tweak some static consts
* Reset LCD status to fallbacks

When paused, "Print paused..."
When SD printing, the filename
When host printing, "Printing..."
When idle, "MyPrinter ready."
 2018-04-22 00:15:57 -05:00
Anton Piliugin
38c97dc975 Update language_ru.h (#10481) 2018-04-22 00:12:21 -05:00
Scott Lahteine
d7ec13ce69 Creality3D Power-Loss Recovery 2018-04-21 21:30:25 -05:00
Scott Lahteine
7e585cab83 Add POWER_LOSS_RECOVERY to example configs 2018-04-21 19:13:30 -05:00
Scott Lahteine
e76545c450 Add Stopwatch::resume method 2018-04-21 19:09:31 -05:00
Scott Lahteine
1894b981af Add R parameter to G28 to specify pre-raise 2018-04-21 19:09:31 -05:00
Festivejelly
61f9e28c23 [1.1.x] Wait for bed heaters between probing (#9890) 2018-04-21 15:44:07 -05:00
Scott Lahteine
c6ecfc1429
[1.1.x] Split TRIGORILLA into 1.3 and 1.4 (#10468) 2018-04-20 19:27:11 -05:00
Sebastien Andrivet
4cc2bc1343 [1.1.x] Add new capability to report if Thermal Protection is enabled (#10465) 2018-04-20 16:42:56 -05:00
Scott Lahteine
dcb8af0518 Match Makefile order to boards.h 2018-04-20 16:19:31 -05:00
Scott Lahteine
4108382c2c Complete CREALITY_ENDER revert 
Followup to #9694
 2018-04-20 16:19:31 -05:00
Scott Lahteine
0c1be965b6 Don't report point 0 in MBL G29 2018-04-20 13:18:42 -05:00
Scott Lahteine
6f87e4b4dc Fix up enqueue now functions 
…and apply to MALYAN_LCD.
 2018-04-19 19:33:16 -05:00
Roxy-3D
c91b3142aa
Update ubl_motion.cpp 
Restore necessary and needed loop termination logic.
 2018-04-19 12:03:18 -05:00
Scott Lahteine
51aa9743a6 Rename MKS_13 to MKS_GEN_13 2018-04-18 22:16:16 -05:00
Scott Lahteine
e561ecb5a7 Add BOARD_MKS_BASE_15 with digital micro-stepping 2018-04-18 22:06:25 -05:00
Scott Lahteine
38ed5f5ee9 Fix calls to ubl.get_z_correction 2018-04-18 21:43:44 -05:00
Scott Lahteine
23618d9cd0 Use 0 as the bed position (not Z_MIN_POS) 2018-04-17 20:30:17 -05:00
Scott Lahteine
8cf6ef8411
Merge pull request #10431 from thinkyhead/bf1_fix_and_improve 
[1.1.x] Improve UBL mesh report, M420 V T, M421 N, and…
 2018-04-17 16:59:14 -05:00
Scott Lahteine
fa3c14fccf Fix compile warnings in fastio.h 
Based on #10440 by @GMagician
 2018-04-17 16:36:19 -05:00
Scott Lahteine
773d773baa Fix compile error in tmc_status 2018-04-17 16:15:53 -05:00
Scott Lahteine
5c186f7dd3 Try FIXFLOAT rounding based on sign 2018-04-17 15:59:49 -05:00
Scott Lahteine
77b75ce86c One fewer compare in _lcd_move_xyz 2018-04-17 15:55:43 -05:00
Scott Lahteine
6f156d01d9 Update position for UBL non-segmented activate/deactivate 2018-04-17 15:55:43 -05:00
Scott Lahteine
c0f6eebded Improve UBL mesh report. Add M420 T, M421 N 2018-04-17 15:55:38 -05:00
Scott Lahteine
6786101c64 Ignore LCD_BED_LEVELING with UBL 2018-04-17 15:54:25 -05:00
Scott Lahteine
ee21f44969 Tweak fwretract.retract debug, comments 2018-04-17 15:54:25 -05:00
Scott Lahteine
090e08ef3d M221 with no parameters report flow 2018-04-17 15:54:25 -05:00
Scott Lahteine
444b6d6d83 Prevent delay when power is already on 
Fix #10410
 2018-04-17 04:36:14 -05:00
Scott Lahteine
f1dfc80332 Improved SENSORLESS_HOMING sanity check 2018-04-17 04:10:57 -05:00
Scott Lahteine
31261d0c17 Fix bug in Planner::set_position_mm 2018-04-16 02:05:48 -05:00
Thomas Moore
85d57f7a9e [1.1.x] Change UBL default G29 P4 height to 0 (#9510) 2018-04-15 20:49:03 -05:00
Scott Lahteine
8a159dfec2 Remove Brazilian Portuguese duplicates 
Followup to #10368
 2018-04-15 19:16:01 -05:00
Scott Lahteine
d59ed4dce0
Abort SD printing more safely (#10405) 
Allow the current command to complete when aborting an SD print, otherwise some commands (G28, G29, etc.) will cause trouble.
 2018-04-15 18:26:25 -05:00
Vitorio Miguel Prieto Cilia
110e631656 Update pt-br translation (#10368) 2018-04-15 00:07:13 -05:00
Scott Lahteine
9769d799df clear_block_buffer, kill_current_block in quick_stop 2018-04-13 22:05:58 -05:00
Scott Lahteine
a783caabac Make sure ABL (manual) starts close to the bed 2018-04-13 20:19:49 -05:00
Roxy-3D
b978153ca4
Stow Probe at end of G29 J3 2018-04-13 14:46:40 -05:00
Scott Lahteine
090d72f591
[1.1.x] Add optional menu item to toggle software endstops (#10392) 2018-04-13 00:24:20 -05:00
Scott Lahteine
e3c2d43b2b Tweak MBL move close to bed 2018-04-12 22:41:26 -05:00
Scott Lahteine
5274ab0ad5 MESH_BED_LEVELING before PROBE_MANUALLY 2018-04-12 22:26:56 -05:00
Scott Lahteine
59d9886473 Tweak MIN_STEPS_PER_SEGMENT sanity-check 2018-04-12 20:23:43 -05:00
Luc Van Daele
6e30d1bef1 [1.1.x] G33 MIN_STEPS_PER_SEGMENT (#10385) 2018-04-12 20:19:42 -05:00
Scott Lahteine
db81a1d4a2 Make sure MBL starts close to the bed 
Fix #10390
 2018-04-12 19:37:50 -05:00
Scott Lahteine
2edc13a0e2 Fix M118 parameter handling 
Fix #10388
 2018-04-12 19:06:41 -05:00
Scott Lahteine
8db9b800e7 Compress/update comments ubl_motion 
…to fit more code on the screen and correct outdated commentary contrasting ABL.
 2018-04-12 18:08:33 -05:00
Luc Van Daele
21971f2f7a Overhaul of G33 Delta Calibration (#8821) 2018-04-11 19:12:56 -05:00
Luc Van Daele
b2265869b2 Low Point for delta calibration (#10362) 2018-04-11 18:03:34 -05:00
Scott Lahteine
f408863043 Fix Spanish MSG_[ABC] items 2018-04-11 15:21:08 -05:00
Scott Lahteine
336131fb37 Trailing whitespace 2018-04-11 00:27:43 -05:00
Scott Lahteine
808d6f367b Tweak RAMPS SDSS pins 2018-04-10 16:46:17 -05:00
Scott Lahteine
4f660a18bc Add Z_PROBE_LOW_POINT to prevent damage 2018-04-09 17:22:28 -05:00
Scott Lahteine
e87ae5b643 Add Z_PROBE_LOW_POINT to example configs 2018-04-09 01:56:57 -05:00
Scott Lahteine
73fe8ef4df Followup to #10177 2018-04-09 01:16:51 -05:00
Scott Lahteine
157d28c418 Rename, arrange advanced pause purge options 2018-04-09 01:14:07 -05:00
Scott Lahteine
e143b1252f Appy const to manage_inactivity 2018-04-08 23:53:55 -05:00
Roxy-3D
816fa9e2b4 More accurate number for Z_PROBE_OFFSET_FROM_EXTRUDER 2018-04-08 22:25:11 -05:00
Roxy-3D
661a38586b Resolve corruption of Max7219 Debug LED Matrix 2018-04-08 22:25:11 -05:00
Scott Lahteine
56b5fb5e15 Update Bed PID config comments 2018-04-08 06:46:05 -05:00
Scott Lahteine
2205c7775b FILAMENT_CHANGE_LOAD_LENGTH sanity-check 
Followup to #10177
 2018-04-08 03:31:15 -05:00
Scott Lahteine
b637b80a9a
Merge pull request #10177 from thinkyhead/bf1_filament_load_accel 
[1.1.x] Filament load/unload add acceleration for Bowden
 2018-04-08 03:28:45 -05:00
Scott Lahteine
19440df4d0 Better RESTORE_LEVELING_AFTER_G28 sanity-check 
As suggested by @GMagician
 2018-04-08 03:13:35 -05:00
Scott Lahteine
6f8717ce12 Fix LIGHTWEIGHT_UI with UBL 
As mentioned in https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702
 2018-04-08 03:11:53 -05:00
Scott Lahteine
6ec2cbce18 Bring RepRapPro Huxley config up to date 
Followup to #10343
 2018-04-08 00:31:18 -05:00
indazoo
f6bf247302 Add RepRapPro Huxley configuration (#10343) 2018-04-08 00:19:40 -05:00
Sean
4b36a0a3dc Add acceleration for filament change, load, unload. 
This is useful to achieve a higher movement speed on Bowden extruders.
Also add a slow mode before ramping up to the high speed to make loading easier.
 2018-04-07 23:14:40 -05:00
Scott Lahteine
be0afd71df Add ADVANCED_PAUSE_FEATURE ACCEL options to example configs 2018-04-07 23:14:40 -05:00
Lenbok
0aa833fe6c Chamber temperature monitoring and auto fan control. 
This is an initial cut for feedback.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
 2018-04-06 23:09:44 -05:00
Scott Lahteine
08b09f7a4c Add Chamber Temp options to example configs 2018-04-06 23:09:43 -05:00
Roman Moravčík
151962baf2 Update Slovak language (#10313) 2018-04-06 20:20:40 -05:00
Bob-the-Kuhn
aca2bbbc50 Add TMC software SPI pins to pinsDebug_list.h (#10325) 2018-04-06 20:16:05 -05:00
Scott Lahteine
211544b543 Reset progress bar when print ends 
Fix #10330
Based on #10333 by @marcio-ao
 2018-04-06 20:12:40 -05:00
GMagician
8e36d00ad0 [1.1.x] Update language_it.h (#10323) 
Updated to #10296
 2018-04-06 20:07:08 -05:00
Scott Lahteine
ed949cc5c1 Added support for Einsy Retro 
http://reprap.org/wiki/EinsyRetro
 2018-04-05 18:15:58 -05:00
Scott Lahteine
53757444c5 Default active low for TMC2130 DIAG1 (#10294) 
- Added sanity check to require endstop inverting with SENSORLESS_HOMING
 2018-04-05 18:15:58 -05:00
Scott Lahteine
c46d47f45f Scale feedrate (mm/s to deg/s) for SCARA 2018-04-05 16:17:23 -05:00
Anton Piliugin
bc2fc86993 Update language_ru.h (#10311) 2018-04-05 00:47:02 -05:00
Scott Lahteine
dba26a6d1f Add Continuous Purge feature to Advanced Pause 2018-04-04 20:59:50 -05:00
Scott Lahteine
05fc3d7891 Add ADVANCED_PAUSE_CONTINUOUS_PURGE to example configs 2018-04-04 20:53:00 -05:00
Scott Lahteine
7ff70d7adb
Improve heating/cooling LCD messages (#10296) 2018-04-04 19:13:48 -05:00
Scott Lahteine
a7e142460c
MBL should add z_offset regardless of fade (#10307) 2018-04-04 18:27:09 -05:00
GMagician
9d2ef95f1d Additional tool-change fix (#10305) 
Followup to #10243
 2018-04-04 17:06:25 -05:00
Pavel Peganov
de5f69b285 Add Creality CR-8 configuration (#10285) 2018-04-02 19:58:02 -05:00
Scott Lahteine
829281d016
Merge pull request #10243 from thinkyhead/bf1_tool_change_debug 2018-04-02 19:33:27 -05:00
Scott Lahteine
be098cd42f Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:47 -05:00
Scott Lahteine
6444ef02e4 Add remaining boards to Makefile 2018-04-01 18:15:52 -05:00
D-side
ab5232c37b Fix Ender 4 / CR-8 compilation 
- Assign 243 (like EFB) as Ender-4/CR-8 board ID
- Add to `Makefile`
- Add to `pins.h`
 2018-04-01 18:15:52 -05:00
MoellerDi
6b150bfc40 Handle disabled HYBRID_THRESHOLD in EEPROM (#10274) 2018-04-01 16:58:30 -05:00
Scott Lahteine
885ad70c8b Fix likely issue with retract/recover 
Addressing #10200
 2018-03-31 22:59:48 -05:00
Scott Lahteine
d37cfa327e Note about MKS_MINI_12864 in sanitycheck 2018-03-31 22:51:43 -05:00
Scott Lahteine
040ebd1675 Use lcd_printPGM_utf in more places 
Fix #10256
 2018-03-31 20:47:20 -05:00
Scott Lahteine
48fa0e6de0 Output ABC for delta stepper counts 2018-03-31 20:12:53 -05:00
Scott Lahteine
c9aa7486ce Use float62 for LCD edit of Z Fade 2018-03-31 20:02:28 -05:00
Scott Lahteine
80b3f8c395 Allow Z_SAFE_HOMING sanity checks to handle floats 2018-03-31 19:00:14 -05:00
Scott Lahteine
712b213b40 Split up tool_change, raise for non-delta too 2018-03-30 16:06:52 -05:00
Scott Lahteine
52750bf362 Simplified leveling-based tool change 2018-03-30 16:06:47 -05:00
Scott Lahteine
0afdec882c For set_z_fade_height use set_bed_leveling_enabled 2018-03-30 16:06:42 -05:00
Scott Lahteine
29b048810c Symmetrical FWRETRACT Z Hop 
Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.
 2018-03-30 15:47:06 -05:00
Scott Lahteine
0eb1830d85 Change order of inactive stepper disable/enable 
This ensures that steppers that share an enable pin will only be disabled for a miniscule time.
 2018-03-30 15:10:03 -05:00
Scott Lahteine
f5c980f9cf Clear the "Wait for user" message set by M0/M1 
See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936
 2018-03-29 17:57:50 -05:00
Scott Lahteine
d36e950547 Temporary workaround for tool-change compile error 
Pending a more complete solution to tool-change Z deviation.
 2018-03-29 17:57:50 -05:00
Scott Lahteine
df75e9d692 Fix BLTOUCH compile error 
Followup to #10249
 2018-03-29 17:57:49 -05:00
AnHardt
86c3be7089 No delay in sensorless quick homing (#10253) 2018-03-29 16:09:19 -05:00
Scott Lahteine
575b099e40 Alert users about low Z jerk values 2018-03-28 22:58:41 -05:00
Scott Lahteine
360166f626
Merge pull request #10249 from thinkyhead/bf1_homing_move_adjustments 
[1.1.x] Improvements to general and delta homing
 2018-03-28 22:05:40 -05:00
Scott Lahteine
b5f1a4141c "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
Scott Lahteine
0401f4ce14 Clear sensorless homing in home_delta after first move-to-top 2018-03-28 21:19:14 -05:00
Scott Lahteine
9f3b4d537d Do moves towards endstops differently in do_homing_move 2018-03-28 21:19:14 -05:00
Scott Lahteine
deefd2defa
Wait before turning off PRINTER_EVENT_LEDS at print end (#10247) 2018-03-28 20:32:32 -05:00
Scott Lahteine
1e31b56b0f Fix checksum + card.saving 
Followup to #10204
 2018-03-28 18:40:36 -05:00
Scott Lahteine
86e58df324 Fix G10/G11 debug logging 2018-03-28 18:40:36 -05:00
Scott Lahteine
3edf9904f4 Fix linear/3-point manual leveling buffer overrun 
Fixes #10137
 2018-03-28 18:40:36 -05:00
Scott Lahteine
8f461568e0 Undo German changes 
See 941e9bd329 (commitcomment-28262166)
 2018-03-28 14:46:42 -05:00
Scott Lahteine
e848bebb10 Fix missing comma in tmc_sgt 
Fixes #10209
 2018-03-28 14:44:30 -05:00
Adrian Cuzman
f84f7e5a38 Require a checksum when writing to SD (#10204) 
When streaming commands to SD with XON/XOFF, errors can occur and cause incomplete commands to be written to the file. This change ensures that only commands with line numbers and checksum will be saved to SD.
 2018-03-28 14:43:41 -04:00
Rob Power
677bd19dbf [1.1.x] NANODLP_Z_SYNC requires linear axes (#10239) 2018-03-28 14:02:58 -04:00
Scott Lahteine
dc05d7fc2b Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
Thomas Karl Pietrowski
bfdd14be4f bq Hephestos2: Allow bed leveling (#10234) 
* Increases the offset, needed to allow the nozzle to touch the bed
* By default uses an offset of -4. This one is minimally far way from the buildplate and therefore only fine-tuning is needed to set the correct distance.
 2018-03-27 22:06:14 -04:00
Kai
941e9bd329 Update language_de.h (#10216) 
Wrong meaning
 2018-03-25 15:21:26 -04:00
Scott Lahteine
e1f8c97b21
Chinese updates (#10215) 
From #10211 by @yhfudev
 2018-03-25 12:38:08 -04:00
Scott Lahteine
71c05f1b57 Enforce minimum TMC2130 / TMC2208 libs 2018-03-24 15:56:09 -04:00
Scott Lahteine
2c79faede9
Z correction on tool-change for all HAS_MESH (#10198) 2018-03-23 13:11:51 -05:00
Scott Lahteine
94badcbace Use pgm_read_ptr for tables of pointers 2018-03-23 02:17:51 -04:00
Scott Lahteine
2746eb589e Fix size of EEPROM tmc_hybrid_threshold 
Followup to #10101
 2018-03-23 02:04:45 -04:00
teemuatlut
f264228074 [1.1.x] TMC: Match axis label order (#10189) 2018-03-23 01:02:42 -05:00
Roxy-3D
994fdb5179
Get data declarations consistent... 2018-03-22 19:22:49 -05:00
Scott Lahteine
c57545ee08 blocks_queued => has_blocks_queued 2018-03-21 19:08:02 -05:00
Scott Lahteine
647c04def8 Automatically reset stepper timeout in manage_inactivity 
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
 2018-03-21 19:08:02 -05:00
Roxy-3D
9e987e4971
Correct truncated comment 2018-03-21 16:53:40 -05:00
Scott Lahteine
ba55602462 Tweaks to M915 2018-03-21 05:41:00 -05:00
Scott Lahteine
ec46336df7 For MK2_MULTIPLEXER undef DISABLE_INACTIVE_EXTRUDER 
Fix #10098
 2018-03-21 05:41:00 -05:00
Scott Lahteine
d57adbb88b Trust the bootloader to clear globals 2018-03-21 05:41:00 -05:00
Scott Lahteine
b24099c9d0 Allow G53 to go back to native space 2018-03-21 01:38:41 -05:00
Scott Lahteine
203d3f8f56 UBL G29 parity with 2.0.x 2018-03-21 01:36:16 -05:00
Scott Lahteine
d9e1cbebea Tweak use of move_z_after_probing 2018-03-21 01:36:16 -05:00
Scott Lahteine
e5fbbbc068 Allow no raise after run_z_probe in probe_pt 2018-03-21 01:36:16 -05:00
Scott Lahteine
4eddcf9142 Also suspend keepalive messages with suspend_auto_report 2018-03-21 00:26:00 -05:00
Scott Lahteine
bc01200495
Merge pull request #10101 from thinkyhead/bf1_eeprom_M913 
[1.1.x] More complete Trinamic driver options
 2018-03-20 23:14:10 -05:00
AnHardt
105c81217c Make 2 constants in autotune configurable 
But hidden, since changes are rarely needed.
 2018-03-20 16:39:27 -05:00
AnHardt
3911c38d5e Fix autotune Thermal Protection 
When `THERMAL_PROTECTION_BED` is off but `THERMAL_PROTECTION_HOTENDS` is on, `watch_temp_period` and `watch_temp_increase` are initialized with the values for `THERMAL_PROTECTION_HOTENDS`. Later it is not tested if these values are for the bed or the nozzles.

- Add test.
- Name a constant.

Fix for #10150
 2018-03-20 16:38:38 -05:00
Bob-the-Kuhn
80adb124f7 remove MARLIN line , change to logical pin (#10163) 
delete physical pins from AT90USB
 2018-03-20 16:24:17 -05:00
teemuatlut
8e783e24e8 [1.1.x] TMC: Fix CURRENT_STEP_DOWN (#10169) 2018-03-20 15:15:15 -05:00
Scott Lahteine
8a19bc0c0e Prevent null pointer crash in Endstops::update 
Thanks to Evgeny Kotsuba!
 2018-03-20 04:23:38 -05:00
Scott Lahteine
312bebff9a Add 'I' parameter to M906/M913/M914; 'T' to M906/M913 2018-03-19 22:06:04 -05:00
Scott Lahteine
4995e0ebfa Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS. 2018-03-19 22:06:04 -05:00
Scott Lahteine
84bbd018ab Improve Trinamic support in the EEPROM 2018-03-19 22:06:04 -05:00
Scott Lahteine
a03502080e Consolidate smart stepper driver initialization 2018-03-19 22:06:04 -05:00
Scott Lahteine
72776f647b Move _AXIS macro to macros.h 2018-03-19 17:59:59 -05:00
Scott Lahteine
4eb4476ce6
Merge pull request #10153 from thinkyhead/bf1_fewer_options 
[1.1.x] Consolidate 3-point probing, auto delta probe radius
 2018-03-19 04:47:13 -05:00
Scott Lahteine
a66ae52234
Add CorePQ support for BABYSTEPPING (#10074) 2018-03-19 02:51:30 -05:00
Scott Lahteine
68b9503b96 MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS 2018-03-19 02:17:45 -05:00
Scott Lahteine
cf4e2e507f Consolidate 3-point leveling point options 2018-03-19 01:55:51 -05:00
Scott Lahteine
af3500044a Power off in kill instead of setting PS_ON to input 2018-03-18 20:59:02 -05:00
Scott Lahteine
5793ca42b5 Fix matrix.debug output 2018-03-18 20:03:34 -05:00
Scott Lahteine
07b1ac06a9 More concise tmc_util output, fix a ternary type 2018-03-18 19:10:16 -05:00
Scott Lahteine
bba2a3b906 Prevent lcd_update stack overflow on SD Card change 2018-03-18 18:53:34 -05:00
Scott Lahteine
80c70f33eb Squash UBL G29 postscript comment 2018-03-18 18:35:41 -05:00
Scott Lahteine
d16f443d33
Fix home_delta for SENSORLESS_HOMING (#10144) 2018-03-17 20:52:14 -05:00
Scott Lahteine
f7de05e50c General spacing cleanup 2018-03-17 16:51:34 -05:00
Mitchell Abbott
aef23c9637 [1.1.x] Update X/Y/Z pin assignments for Einsy Rambo (#10131) 2018-03-17 16:40:15 -05:00
Scott Lahteine
7cf2788cc3 Easier override of ST7920 LCD timing 2018-03-17 02:37:24 -05:00
Scott Lahteine
c294613b53 Fix CardReader::getStatus when not printing 2018-03-17 02:37:24 -05:00
Scott Lahteine
6146126b2a Fix SWITCHING_EXTRUDER manual movement 2018-03-16 03:21:56 -05:00
Scott Lahteine
5492f15633 Reduce size of "only one" sanity checks 2018-03-16 02:43:28 -05:00
Scott Lahteine
4d1df2e357 Fix some spelingz 2018-03-16 01:26:38 -05:00
Scott Lahteine
a560c0f7cd Add C parameter to M27 to get the current filename 
In answer to #10001

Add an option to retrieve the currently open file name (long filename if possible).
 2018-03-15 22:55:30 -05:00
Scott Lahteine
ec30e8c9ef Allow NULL prepend in lsDive 2018-03-15 22:41:56 -05:00
Scott Lahteine
bc0e977229
Delta support for multiple hotends with offsets (#10052) 2018-03-15 22:29:33 -05:00
Scott Lahteine
1993365967 Update Marlin for newest TMC libraries 
- TMC2130Stepper v2.2.0
- TMC2208Stepper v0.0.4
 2018-03-15 21:23:15 -05:00
shaktee
c2ba9a03ee BIBO2 default update and Cyclops config (#10107) 2018-03-15 00:17:04 -05:00
Scott Lahteine
7b2ea8febe Sync main adv config with recent change 2018-03-15 00:09:23 -05:00
Scott Lahteine
e38307355e Fix E direction for MK2_MULTIPLEXER and LIN_ADVANCE 2018-03-14 07:57:19 -05:00
Scott Lahteine
5c81ce2bb8
When STATUS_EXPIRE_SECONDS is 0, hide the position. (#10100) 
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
 2018-03-14 02:44:41 -05:00
Studiodyne
7f8984b500 [1.1] FWRetract Reset (Best way) (#10084) 2018-03-14 01:34:15 -05:00
Scott Lahteine
062b955f1d
Merge pull request #10092 from thinkyhead/bf1_trinamic_config 
[1.1.x] Clean up Trinamic config options, sanity check
 2018-03-14 01:16:35 -05:00
Scott Lahteine
ccb2a95456 Update includes for gcode.h => parser.h 2018-03-14 01:01:45 -05:00
Scott Lahteine
00165699e9 Move gcode.* to parser.* for 2.0.x parity 2018-03-14 00:55:20 -05:00
Scott Lahteine
cc4148e246 Use lcd_goto_previous_menu_no_defer more 2018-03-14 00:49:11 -05:00
Scott Lahteine
dc98ee553f Fix compiler warning for ANALOG_SELECT 2018-03-13 22:33:56 -05:00
Scott Lahteine
738a8495ad Improve TMC config organization, naming 2018-03-13 21:43:43 -05:00
Scott Lahteine
17b4ba7c9c Add TMC2208 include in tmc_util.h 2018-03-13 21:41:12 -05:00
Shen Yiming
96c54c188a Fix MKS_12864_OLED blank issue #10071 (#10094) 2018-03-13 04:51:21 -05:00
Scott Lahteine
e63cb5fe8f
[1.1.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10068) 
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
 2018-03-13 01:15:29 -05:00
Scott Lahteine
4dad8628ff Move MKS_12864OLED to lcd_implementation_init 2018-03-12 08:51:48 -05:00
Scott Lahteine
009fd186f8 M218: report with no parameters 2018-03-12 08:08:52 -05:00
Scott Lahteine
8c7e98627f Patch do_blocking_move_to so 'destination' can be used 2018-03-12 08:06:48 -05:00
Scott Lahteine
656c3c3b2a Followup to auto-assign dual axis CS pins 2018-03-12 07:23:02 -05:00
Scott Lahteine
9ec8762497 Fix typo in ubl.prepare_segmented_line_to 2018-03-11 10:22:52 -05:00