Firmware

Author	SHA1	Message	Date
Scott Lahteine	e9d374dd54	Tweak sanity-check for SENSORLESS_HOMING	2018-02-04 21:17:03 -06:00
Scott Lahteine	21bfbb9d44	Apply standards for whole-file conditions	2018-02-04 21:17:03 -06:00
Scott Lahteine	5054c53901	Export more in ultralcd.h Closer parity with 2.0.x	2018-02-04 21:17:03 -06:00
Scott Lahteine	56d5c5b97a	Misc. comments	2018-02-04 21:16:07 -06:00
Scott Lahteine	ad70d76faa	Merge pull request #9332 from paierh/bugfix-1.1.x-UBL-pattern [1.1.x] Change angles for circles in G26-validation-pattern	2018-02-04 19:05:32 -06:00
Michael Neumann	499248c5ef	Allow override of RAMPS CS Pins	2018-02-04 06:10:42 -06:00
shaktee	6e86c9d22b	Add BIBO configs to Marlin bugfix-1.1.x (#9467 ) [1.1.x] BIBO TouchX configuration	2018-02-03 23:20:35 -06:00
Scott Lahteine	d00eb4da5c	Language updates for parity	2018-02-03 22:48:06 -06:00
Thomas Moore	5b4e39a429	Apply feedrate to nozzle movement for kinematic machines	2018-02-03 22:17:13 -06:00
Scott Lahteine	3bdd7b1ed3	Reduce trig table down to 6 floats	2018-02-03 19:16:42 -06:00
GMagician	14b7c8cf51	[1.1.x] Fix temperature out of LCD Fix bug introduced in #9381 Original code was 18-chars*6 hence reversed number in if statements	2018-02-03 22:58:26 +01:00
paierh	68cff5f245	Change G26 circle angles Changed the start- and end-angles for circles in the mesh-validation-pattern to avoid crossing lines. At the start-/end-point of the circles there is a small dot of filament on my printer. When drawing lines after the circles the nozzle crashes into those dots and destroys the circles. I solved this problem by rotating the start- and end-points by 45 degrees.	2018-02-02 05:24:31 -06:00
Manuel Valentino	652162777b	[1.1.x] Fixed wrong information about TMC2208 wiring (#9334 )	2018-02-02 04:14:43 -06:00
teemuatlut	923f17328f	Add TMC software SPI (#9362 )	2018-02-02 03:56:08 -06:00
Custom3DProducts	f4076fe99d	[1.1.x] Add Z_PROBE_HYSTERESIS to mitigate Z jerking while probing (#9375 )	2018-02-02 02:29:19 -06:00
Scott Lahteine	6445859270	Merge pull request #9373 from nikkoura/fix_fr_strings [1.1.x] Fix french language (typos, case homogeneity)	2018-02-02 01:54:12 -06:00
GMagician	4661451d32	[1.1.x] Fix compile error on delta when NO_WORKSPACE_OFFSETS (#9387 )	2018-02-02 01:43:53 -06:00
Scott Lahteine	8bccd0ef5b	Fix up _Bootscreen.h and _Statusscreen.h - Support for 3 and 4-frame fan animation - Binary bitmap data for easier visualization - Cleanup mystery numbers, etc.	2018-02-02 00:55:02 -06:00
Scott Lahteine	f4639fa964	Move SET_BIT macro to endstops.cpp and simplify	2018-02-02 00:50:29 -06:00
Scott Lahteine	0a10d010b7	Merge pull request #9390 from tcm0116/1.1.x-retract [1.1.x] Clear retracted status when homing the Z axis	2018-02-01 23:36:53 -06:00
Scott Lahteine	7a056a4e09	Patch resume_print based on suggestion See #9392	2018-02-01 23:34:14 -06:00
Scott Lahteine	33c459c1d6	Parser followup patch Based on #9393	2018-02-01 23:25:22 -06:00
Scott Lahteine	65c2f3bb65	Merge pull request #9435 from thinkyhead/cleanup_binary_deleteme [1.1.x] Separate 32-bit wide bit macros	2018-02-01 22:44:18 -06:00
Scott Lahteine	31920a5285	Add / use 32-bit wide bit macros	2018-02-01 21:47:23 -06:00
Scott Lahteine	b78cccad0f	Fix broken G29 W I J	2018-02-01 19:50:18 -06:00
Thomas Moore	36a1d12238	Clear retracted status when homing the Z axis	2018-01-29 19:35:16 +00:00
Nikkoura	79183f7620	Fix french language (typos, case homogeneity)	2018-01-28 00:01:00 +01:00
GMagician	b0f148f7db	[1.1.x] Fix SD wrong filename list (#9343 ) If last file in directory has short filename and is preceded by a deleted long file name. SD menu will wrongly report long deleted file name as last entry	2018-01-24 23:07:58 -06:00
Scott Lahteine	bc4fa3984b	Prettier codebits debugging	2018-01-24 00:30:58 -06:00
Scott Lahteine	d60e5c89d8	Merge pull request #9326 from thinkyhead/bf1_fix_parser_M118 [1.1.x] Fix parser.has_value, M118 parameters	2018-01-24 00:23:50 -06:00
Stefan May	908d487212	removed execution mode from files	2018-01-24 00:17:34 -06:00
Scott Lahteine	a855d01336	Fix M118 parameter parsing	2018-01-23 23:50:42 -06:00
Scott Lahteine	d5ad51821c	Simplify G-code debug option	2018-01-23 23:50:42 -06:00
Scott Lahteine	59b5800e58	Change parser codebits from array to int32_t	2018-01-23 23:50:42 -06:00
Scott Lahteine	1b84807eb0	Fix has_value with FASTER_GCODE_PARSER	2018-01-23 23:50:42 -06:00
Scott Lahteine	3ab4736ac9	Move some strings to PROGMEM	2018-01-23 23:50:42 -06:00
Scott Lahteine	d8aa40eedf	Marlin must override _BV for 32-bit masks!	2018-01-23 23:50:42 -06:00
Scott Lahteine	2177c246d5	Patch BQ Hephestos 2 filament diameter From #9314	2018-01-23 20:38:43 -06:00
Scott Lahteine	f447668387	Optimize some serial strings	2018-01-23 18:59:35 -06:00
Scott Lahteine	d4ab383a1b	Lightly optimize arc length calculation	2018-01-23 18:59:35 -06:00
Scott Lahteine	87c254b238	Patch M114 D logical output	2018-01-23 18:48:53 -06:00
Scott Lahteine	df5c06ab7b	Fix G29 no_action with A and Q	2018-01-23 13:58:36 -06:00
Scott Lahteine	b2dcb75c6c	Include Z Fade in log_machine_info	2018-01-23 13:58:36 -06:00
Scott Lahteine	074f191bc3	Followup patch for TMC stepper init	2018-01-23 13:58:36 -06:00
Manuel Valentino	2bda584fc6	Added missing SoftwareSerial begin for TMC2208	2018-01-22 10:49:40 -06:00
Thomas Moore	b818543045	[1.1.x] Fix change filament for delta machines (#9296 )	2018-01-22 10:19:00 -06:00
Scott Lahteine	1cea0b6f70	Fix Skew Correction pre-calculation overflow error	2018-01-22 08:22:28 -06:00
Scott Lahteine	5c6061ea5a	More precision in M852 skew report	2018-01-22 08:06:40 -06:00
Scott Lahteine	6799aa9806	Merge pull request #9278 from oysteinkrog/fix/DualX_Endstops_1.1.x [1.1.x] Fix DUAL_X_CARRIAGE endstop tests	2018-01-22 07:42:28 -06:00
Scott Lahteine	049898fa30	Update comment on set_home_offset	2018-01-22 06:14:55 -06:00
Scott Lahteine	feb6014e92	Don't run `M600` on filament runout if the nozzle is cold	2018-01-22 05:46:29 -06:00
Scott Lahteine	c7ae531e35	Better LCD message when heating needed	2018-01-22 05:46:29 -06:00
Scott Lahteine	c373afbddd	Clean up and document load/unload/pause/resume	2018-01-22 05:46:19 -06:00
Scott Lahteine	c970869d74	Add hotEnough methods	2018-01-22 05:46:19 -06:00
Scott Lahteine	e8687e5b9e	Update pins.h for parity, protect MS pins	2018-01-22 02:19:04 -06:00
Scott Lahteine	198498b1aa	Sanity check for TMC2130 having CS pins	2018-01-22 02:04:21 -06:00
cprund	0527090a31	Minor bugfix to the code that enables the 2nd X stepper. It needs to be enabled for X_DUAL_STEPPER_DRIVERS. (#9286 )	2018-01-22 01:32:09 -06:00
Scott Lahteine	3d9f360b5a	Better probe boundaries for linear/grid	2018-01-22 01:10:34 -06:00
Scott Lahteine	c8ac3a2a72	Add example configs for JGAurora A5	2018-01-21 22:23:31 -06:00
Scott Lahteine	957bb3124a	Add thermistor 15 tuned for JGAurora A5	2018-01-21 16:57:47 -06:00
Øystein Krog	1f37781bf1	Fix DUAL_X_CARRIAGE endstops \#8170 fixed (cherry picked from commit 441517bbe1625aa68a49aef0f98c6c4184e66dff)	2018-01-21 16:32:29 +01:00
Scott Lahteine	7b62670987	Merge pull request #9272 from thinkyhead/bf1_creality_tuneup [1.1.x] Fix and improve Creality configs	2018-01-21 02:53:08 -06:00
Scott Lahteine	7b5a4f71be	Fix toDigital length with days From #9220	2018-01-21 02:50:54 -06:00
Scott Lahteine	94a9cd6477	CR-10S filament change length, enhanced status bitmap	2018-01-21 01:58:55 -06:00
Scott Lahteine	0cfcc7cbf5	Make "Ender" status screen dual-nozzle ready	2018-01-21 01:58:55 -06:00
Scott Lahteine	292755258a	Add a heating indicator X offset	2018-01-21 01:58:40 -06:00
nhchiu	4a40cf268d	Use NEOPIXEL as case light Add an option to use the NEOPIXEL LED as case light.	2018-01-20 16:57:04 -06:00
Scott Lahteine	428fbe8228	Apply CASE_LIGHT_USE_NEOPIXEL to example configs	2018-01-20 16:27:30 -06:00
Scott Lahteine	81a12b2fac	Relative movements fix	2018-01-20 15:22:38 -06:00
Scott Lahteine	fb636db61a	Patch to restore broken Dual X Carriage	2018-01-20 15:07:40 -06:00
Scott Lahteine	369f1a64d8	Merge pull request #9262 from tcm0116/1.1.x-delta_softstops [1.1.x] Allow DELTA to compile with soft endstops disabled	2018-01-20 14:16:14 -06:00
Scott Lahteine	6ed2840615	Use delay() in serial temp report	2018-01-20 14:12:30 -06:00
Scott Lahteine	eb3a05c437	Allow FIL_RUNOUT_PIN override on RAMPS-based boards	2018-01-20 12:00:03 -06:00
Scott Lahteine	d29a0d64d5	Set FIL_RUNOUT_PIN for Creality CR10-S Tested with M43 and found to be connected to DIO 2	2018-01-20 11:58:37 -06:00
Scott Lahteine	09ad00b2d1	Use standard encoder pulses/steps for CR-10S	2018-01-20 11:34:53 -06:00
Thomas Moore	f8192f6e46	Allow DELTA to compile with soft endstops disabled	2018-01-20 09:43:59 -06:00
Scott Lahteine	f360b3b849	Date refresh	2018-01-20 09:17:00 -06:00
Scott Lahteine	74c23bf80d	Merge pull request #9232 from GMagician/1.1.x-ramps-pins-fixup [1.1.x] Expand RAMP case light possibilities	2018-01-19 22:29:09 -06:00
Scott Lahteine	8d14ff1446	Merge pull request #9248 from GMagician/1.1.x-bed-temp-limit-fix [1.1.x] Standardized max temp values	2018-01-19 22:27:00 -06:00
GMagician	2814103458	Standardized max temp values Everywhere in menu items temperatures are "defined value" subtracted by 15. In one place is subtracted by 5	2018-01-19 19:41:45 +01:00
Bob-the-Kuhn	d0e61d82c0	TMC2208 sanity check	2018-01-18 23:16:41 -06:00
Roxy-3D	0edf5a2ab5	Better handle serial over runs...	2018-01-18 16:51:27 -06:00
Roxy-3D	597d94bd3a	Better handle serial buffer over run	2018-01-18 16:48:12 -06:00
Roxy-3D	73565728c7	Further clean up for serial over run issue during long operations	2018-01-18 14:38:18 -06:00
GMagician	3b53c5ada1	Expand RAMP case light possibilities Pin 6 is only used by servos when 2 or more of them are used	2018-01-18 18:35:08 +01:00
Roxy-3D	cbdbeb3e69	PronterFace M105 work around (#9227 ) PronterFace keeps sending M105 requests during long operations like G29 P1, G29 P2, G29 P4 and G26. The serial buffer fills up before the operation is complete. The problem is, a corrupted command gets executed. It is very typical for the M105 to turn into a M1 (actually... M1M105 is typical). This causes the printer to say "Click to resume..." This is a temporary fix until we figure out the correct way to resolve the issue. More work needed for G26.	2018-01-17 22:51:19 -06:00
Roxy-3D	80c1afde0f	Fix mesh size...	2018-01-17 09:33:18 -06:00
Roxy-3D	c11665e92f	Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 (#9213 ) The changes to ultralcd.cpp for is_lcd_clicked() did not encompass the full functionality of UBL's G29 P1, P2 and P4. It also broke G26's ability to abort in several of its phases. This is the first pass at fixing the problem. It has been tested for correctness for several hours but more testing needs to be done. There may be a few follow up patches to finish covering all the corner cases, but right now I need to merge this before any conflicts show up. Some of these changes will need to be moved over to the bugfix-v2.0.0 branch. That will happen a few days from now.	2018-01-17 00:27:50 -06:00
Scott Lahteine	333bd8f394	Merge pull request #9203 from benlye/m73-bugfix-1.1.x [1.1.x] Fix progress bar duration when time is exactly 86400s	2018-01-16 21:14:31 -06:00
Bob-the-Kuhn	ba9aa47260	Revert "[1.1.x] Fix missing deceleration steps"	2018-01-16 11:31:27 -06:00
blye	deda3d3a3c	Fix duration when time is exactly 86400s	2018-01-16 08:16:42 +00:00
Bob-the-Kuhn	ec028faa1b	Merge pull request #9174 from Sebastianv650/fix_missing_decel_steps [1.1.x] Fix missing deceleration steps	2018-01-15 21:03:51 -06:00
Roxy-3D	06adef7343	Get FT-i3-2020 example files in compliance with ?_BED_SIZE	2018-01-15 15:32:19 -06:00
Scott Lahteine	69c993092b	Followup to Ender config	2018-01-15 05:48:50 -06:00
Tommie Gannert	f3f26f7cb3	Creality Ender support. Reverse engineered from the unpublished firmware from Creality, inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". Configurations were found by seeing what code was compiled into the firmware, and constants used there. They used Marlin 1.0.1, because * 1.0.0 had very different serial output in `setup()` and overall code structure. * 1.0.2 changed the `VERSION_STRING` to include a leading space, and `lcd_init` uses `SET_INPUT` instead of `pinMode`. For U8Glib, a version between 1.14 and 1.17 was used, because * 1.12 didn't have the extra speed argument to u8g_InitCom. * 1.13 didn't have the soft reset instruction for UC1701 initialization. * 1.18 has a new directory structure. Quirks * The value of PID_dT hints that F_CPU is 20M, but MarlinSerial.begin suggests it's indeed 16M (and the board uses 16M). Left at 16M for now. * The LED and DOGLCD_CS are on the same pin.	2018-01-15 03:39:43 -06:00
Scott Lahteine	a16ae30a61	More featureful CR-10S configuration	2018-01-15 01:02:23 -06:00
Scott Lahteine	175207659a	Merge pull request #9183 from thinkyhead/bf1_new_flsun_config [1.1.x] Add FLSUN Kossel configuration	2018-01-15 00:49:25 -06:00
Scott Lahteine	5129eb1d43	More reliable temperature serial output?	2018-01-15 00:44:55 -06:00
Scott Lahteine	8f08e029d8	More up-front option to show SD percentage	2018-01-14 23:30:59 -06:00
Scott Lahteine	5c6c12dc3a	Patch EEPROM for 32-bit	2018-01-14 23:18:45 -06:00
Scott Lahteine	734fa91e63	Misc config updates	2018-01-14 23:18:45 -06:00
Scott Lahteine	1d5eba4470	Add FLSUN Kossel configuration	2018-01-14 23:18:45 -06:00
Scott Lahteine	758d9db964	Link to marlinfw.org bitmap tool	2018-01-14 22:39:57 -06:00
Scott Lahteine	1d8b03964f	Merge pull request #9164 from GMagician/1.1.x-SD-issues-fix [1.1.x] sd issue fix	2018-01-14 20:47:04 -06:00
Sebastianv650	4fa0937a55	Fix missing deceleration steps Marlin never reached final_speed after deceleration.	2018-01-14 17:09:47 +01:00
GMagician	82dc89bfd2	Save some program memory This will save some program memory with no speed lose	2018-01-13 09:46:54 +01:00
GrantM11235	a0bd811093	[1.1.x] Fix support for Malyan M150 (#9146 ) Implements changes to LCD and encoder pins from forums.reprap.org/read.php?110,716538,728278 and also sets ST7920_DELAY_[1-3] to DELAY_2_NOP to be compatible with the slower LCD	2018-01-12 01:14:07 -06:00
Scott Lahteine	c1d6d24b9d	Cleanup spacing, commentary	2018-01-11 18:52:54 -06:00
Sebastianv650	e2871f0dcd	[1.1.x] Ensure smooth printer movements (#9149 ) - Never execute a block without an up-to-date trapezoid - Start blocks with MINIMUM_PLANNER_SPEED, except when coming from a full stop	2018-01-11 18:50:18 -06:00
Bob-the-Kuhn	4393c3ef7f	LCD_CONTRAST to uint16_t for 1.1.x parity (#9148 )	2018-01-11 18:32:41 -06:00
Scott Lahteine	e8b1bbac83	Creality CR-10S configurations Provided by printedsolid.com	2018-01-11 01:03:34 -06:00
Scott Lahteine	885200f833	Bring other configs up-to-date	2018-01-11 01:03:34 -06:00
Scott Lahteine	3df0d62725	Updates to TMC support	2018-01-10 04:32:49 -06:00
Scott Lahteine	d1ce0bc071	M915 Z Axis Calibration	2018-01-09 18:55:08 -06:00
Scott Lahteine	9714c9aebe	Merge pull request #9128 from fiveangle/bf1-disable_serial_stats_on_usbcon [1.1.x] SERIAL_STATS_* features not supported on USBCON targets	2018-01-09 18:42:26 -06:00
Dave Johnson	2fcef3e8e2	Enable USE_ZMIN_PLUG on SCARA example (#9125 )	2018-01-09 18:41:02 -06:00
Dave Johnson	dd55c98139	SERIAL_STATS_* features not supported on USBCON targets	2018-01-09 16:27:57 -08:00
Scott Lahteine	bb5ba482bc	More EEPROM field debugging	2018-01-09 18:10:33 -06:00
GMagician	5903b002ac	1.1.x semitec 104NT-4 added (#9120 ) Table is very very similar to old 104-GT2 so I added only the name and recycled old ID	2018-01-09 16:53:44 -06:00
Anthony	1326eb4ef7	fix fwretract structure reference #9102 Marlin_main.cpp: In function 'void resume_print(const float&, const float&, int8_t)': Marlin_main.cpp:6646: error: 'retract_length' was not declared in this scope do_pause_e_move(-retract_length, fwretract.retract_feedrate_mm_s); ^	2018-01-08 18:48:19 -06:00
Scott Lahteine	0eee55c0dd	Patch TMC current read from EEPROM	2018-01-07 20:49:43 -06:00
Scott Lahteine	f8dee4e726	Merge pull request #9088 from thinkyhead/bf1_mbl_localize [1.1.x] MBL cleanup, has_mesh() method	2018-01-07 20:10:10 -06:00
Tannoo	2c3bdfe2ea	[1.1.x] UBL Mesh Storage Message (#9094 )	2018-01-07 20:07:20 -06:00
Scott Lahteine	ffeb4495fe	Make mbl.has_mesh() a method	2018-01-07 18:14:37 -06:00
Scott Lahteine	be555e3578	Move MBL functions into the class	2018-01-07 18:14:37 -06:00
Scott Lahteine	eec97a5cf1	Don't wrap mbl.h in conditionals	2018-01-07 00:24:46 -06:00
Scott Lahteine	fa3709451b	Set mbl.has_mesh on manual point entry Based on #9086	2018-01-06 23:32:00 -06:00
Scott Lahteine	eaa6257baf	Fix M503 skew output Followup to `1761cacaa1`	2018-01-06 20:53:33 -06:00
Someone Unknown	b5e98ac1b7	Set laser/spindle PWM to lowest speed on M5	2018-01-06 14:01:58 -06:00
GMagician	4cb35a285b	Bmp fix Clockwise arrow fixed	2018-01-06 19:08:37 +01:00
Bob-the-Kuhn	0b5b2a424c	Merge pull request #9067 from MarlinFirmware/SD-detect [bugfix-1.1.x] SD card detect fix	2018-01-05 20:32:33 -06:00
Bob-the-Kuhn	0868907359	works	2018-01-05 19:12:34 -06:00
Scott Lahteine	670df2ea6d	Settings FIELD_TEST fix	2018-01-05 19:12:22 -06:00
Scott Lahteine	fbda8a2e2b	UBL G29 works without settings.load	2018-01-05 15:47:52 -06:00
Scott Lahteine	3d34dddbc0	Squish lcd_advanced_pause_show_message	2018-01-05 15:47:52 -06:00
Scott Lahteine	3b3b7e09ec	Add FIELD_TEST to validate storage	2018-01-05 15:47:52 -06:00
Scott Lahteine	5d26f88bd5	Add data size validation	2018-01-05 15:47:52 -06:00
Scott Lahteine	51977c64ee	Add a struct defining EEPROM storage	2018-01-05 15:47:51 -06:00
Scott Lahteine	42216f52ab	Add MarlinSettings::validate()	2018-01-05 14:40:20 -06:00
Scott Lahteine	760c4e94d5	Write filler for disabled volumetrics	2018-01-05 10:20:17 -06:00
Scott Lahteine	a4e0fd7883	Pretty up TMC current write	2018-01-05 10:20:16 -06:00
Scott Lahteine	2287fa126c	Whitespace cleanup	2018-01-05 10:19:15 -06:00
Scott Lahteine	fd4f49512d	Merge pull request #9054 from thinkyhead/bf1_fwretract_class [1.1.x] FWRetract class for 2.0.x parity	2018-01-04 19:40:32 -06:00
MD	7d8acb8def	[1.1.x] CheapTRONIC v2.0 pins additions/revisions (#9030 )	2018-01-04 18:34:47 -06:00
Scott Lahteine	e7bf7e6031	Make FWRetract class for 2.0.x parity	2018-01-04 17:54:24 -06:00
Scott Lahteine	2ed4d4a30a	Squish down process_parsed_command	2018-01-04 16:30:12 -06:00
Roxy-3D	d2dc7a53c2	use SERIAL_EOL(); instead of new line string	2018-01-04 16:18:00 -06:00
Roxy-3D	80cc860810	Use SERIAL_EOL(); instead of passing new line string	2018-01-04 16:16:28 -06:00
Roxy-3D	39289a6952	add precision to planner.xy_skew_factor so it doesn't print as 0.00	2018-01-04 16:11:05 -06:00
Roxy-3D	1761cacaa1	Add precision to planner:xy_skew so it doesn't print as 0.00	2018-01-04 16:07:20 -06:00
Scott Lahteine	f33b405152	M603 report in load/unload order	2018-01-04 05:20:56 -06:00
revilor	aec65112b5	Fix for issue #9005 , #8942 - Bed PID autotuning (#9037 )	2018-01-04 03:26:29 -06:00
Scott Lahteine	cce91eef61	Patch M701 get extruder arg	2018-01-04 02:13:10 -06:00
Scott Lahteine	46a839cbca	No default needed	2018-01-03 22:52:25 -06:00
Scott Lahteine	c5e31b1723	Merge pull request #9032 from tcm0116/1.1.x-ultralcd [1.1.x] Fix 'lcd_temp_menu_e0_filament_change' was not declared error	2018-01-03 21:34:37 -06:00
Scott Lahteine	01e3ccfd69	Cleanup, commentary of M303 pid tuning code	2018-01-03 20:48:43 -06:00
Scott Lahteine	a436e89b83	Fix resume_print positioning	2018-01-03 20:12:44 -06:00
Thomas Moore	faf7dda9d3	Fix 'lcd_temp_menu_e0_filament_change' was not declared error	2018-01-03 19:18:34 +00:00
Tannoo	d3139e47f8	[1.1.x] EEPROM init fix (#9002 )	2018-01-03 04:28:15 -06:00
Thomas Moore	586d50ff99	Fix UBL compilation warnings	2018-01-02 19:41:02 -06:00
Scott Lahteine	ba9879f8fa	Merge pull request #9008 from karkla/bugfix-1.1.x [1.1.x] Update pins_MKS_BASE.h with Microstepping pin definitions	2018-01-01 18:47:59 -06:00
Scott Lahteine	3cd48db9a9	Merge pull request #8983 from ABH10/bugfix-1.1.x_thermistor-tables [1.1.x] Update of comments in thermistor table files. No functional changes.	2018-01-01 18:40:29 -06:00
karkla	454a8ae26a	Update pins_MKS_BASE.h Microstepping Pins (reverse engineered at V1.4) Some new batches have the HR4982 (Heroic) instead of the A4982 (Allegro) as stepper driver. While most of the functionality is similar, the HR variant obviously doesn't work with diode smoothers (no fast decay). But the Heroic has a 128 µStepping mode where the A4982 is doing quarter steps (MS1=L / MS2=H). To achieve comfortable tests with the M350/M351 commands, the following definitions have to made.	2018-01-02 01:29:27 +01:00
Scott Lahteine	9de9e37539	Some temperature code cleanup	2018-01-01 18:03:43 -06:00
Roxy-3D	949191215b	Z BabyStepping should not be dependent on a bed leveling system being active	2018-01-01 14:39:28 -06:00
Arne Husth	decf844788	Update of comments in thermistor table files. No functional changes.	2017-12-31 14:46:56 +01:00
Scott Lahteine	642dec3625	Fix typo in delta buffer_line call Fix #8901	2017-12-31 01:38:36 -06:00
Scott Lahteine	8e82dd0b5b	Merge pull request #8947 from houseofbugs/bugfix-1.1.x [1.1.x] SLIM_LCD_MENUS option	2017-12-31 00:56:10 -06:00
Scott Lahteine	5f13e2e336	Merge pull request #8977 from thinkyhead/bf1_sync_up_configs [1.1.x] Synchronize configs with 2.0.x	2017-12-31 00:55:39 -06:00
Scott Lahteine	4153d76810	Update Marlin_main.cpp	2017-12-31 00:24:57 -06:00
houseofbugs	a66811a597	A specific option to SLIM_LCD_MENUS	2017-12-31 00:15:24 -06:00
Scott Lahteine	839dd66c3b	Synchronize configs with 2.0.x	2017-12-31 00:02:22 -06:00
Scott Lahteine	7a8c132ee9	Apply SLIM_LCD_MENUS to example configs	2017-12-30 23:52:53 -06:00
Thomas Moore	81193e9338	Add M701 / M702 filament load / unload	2017-12-30 19:48:21 -06:00
Scott Lahteine	d1cad5afa4	Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs	2017-12-30 18:22:31 -06:00
Scott Lahteine	2a535bdce8	Followup to #8964	2017-12-30 16:47:26 -06:00
Claus Näveke	52244f690e	Add example config for Tronxy X1 (#8964 )	2017-12-30 16:38:42 -06:00
Scott Lahteine	2385c06696	Apply some PGM_P pointers	2017-12-30 04:16:50 -06:00
Scott Lahteine	81e0f5bc7d	Single pause flag also indicates SD print pause	2017-12-30 04:16:50 -06:00
Scott Lahteine	18e277d9d3	Enqueue commands properly in ultralcd.cpp	2017-12-30 04:16:50 -06:00
Scott Lahteine	025a4558fb	Merge pull request #8944 from zarthcode/patch-1 Fix malformed Capabilities report	2017-12-28 21:06:23 -06:00
Scott Lahteine	85ca7fed93	Show bedlevel with Bed temp indicator …and display a third extruder on character display	2017-12-28 20:21:47 -06:00
Anthony	7637eb863a	Fix malformed Capabilities report	2017-12-28 20:03:44 -06:00
Marcio Teixeira	6195f7810a	Multi extruder support for M600 and LCD (FR #8672 )	2017-12-26 22:59:05 -06:00
Scott Lahteine	ecba9b6738	Merge pull request #8897 from thinkyhead/bf1_lcd_click_redraw [1.1.x] Clear lcd_clicked on use	2017-12-26 20:54:31 -06:00
Scott Lahteine	417bdb0488	Fix bug in NO_VOLUMETRICS	2017-12-26 19:56:22 -06:00
Timothy Hoogland	8ea3b29c17	Fix NO_VOLUMETRICS compile error	2017-12-26 19:32:09 -06:00
Scott Lahteine	81f1001b2c	Clear lcd_clicked immediately on use	2017-12-25 21:50:58 -06:00
Scott Lahteine	5f0026893f	Fix some compiler warnings	2017-12-25 08:51:35 -06:00
Scott Lahteine	4f943a73bc	Fixes for G29 / 3POINT	2017-12-25 08:35:47 -06:00
Scott Lahteine	e31923be8d	lcd_map_control deps on ULTIPANEL	2017-12-25 07:44:32 -06:00
Scott Lahteine	55848a4bd8	Allow consecutive uses of G29	2017-12-25 06:32:55 -06:00
Scott Lahteine	3c7cdcdc22	General cleanup of config-store, reset_bed_level	2017-12-25 04:23:52 -06:00
Scott Lahteine	e0d487e339	Update TMC2208 config store	2017-12-25 04:08:39 -06:00
Scott Lahteine	defff1e4a8	Fix GT2560 A+ servo pins	2017-12-25 02:20:13 -06:00
Scott Lahteine	05a6d48753	Tweak to M125 code	2017-12-25 01:33:46 -06:00
silentninja1	b12eb33feb	Add support for pause and resume action commands on M600	2017-12-25 01:28:17 -06:00
Scott Lahteine	00749d8ef0	Add pause/resume action to example configs	2017-12-25 01:28:16 -06:00
Thomas Moore	59d047c1d7	[1.1.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8864 ) * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE	2017-12-24 23:47:05 -06:00
Scott Lahteine	fb6b62a01b	Comment `return false` in motion functions	2017-12-24 22:56:56 -06:00
Scott Lahteine	e47316c9d3	Tweak cleaning buffer / SD finished command	2017-12-24 20:33:58 -06:00
Scott Lahteine	88c0688961	Reduce default jerk. XY by half. Z by 1/4	2017-12-24 19:49:51 -06:00
Scott Lahteine	aa9cad0cc6	Merge pull request #8870 from petrzjunior/bugfix-1.1.x [1.1.x][Language] Update Czech for Dec 2017	2017-12-24 18:48:37 -06:00
Scott Lahteine	0950527437	Fix WELCOME_MSG in PT From #8879	2017-12-24 18:45:16 -06:00
Scott Lahteine	b7306ef07f	Fix WELCOME_MSG in PT From #8879	2017-12-24 18:42:50 -06:00
Petr Zahradník	0fc3fea8df	Update Czech language Dec 2017	2017-12-22 18:33:11 +01:00
Scott Lahteine	b5677907d0	Minor speedup for SCARA scaling And cleanup of Delta IK macros...	2017-12-21 22:39:06 -06:00
Scott Lahteine	6f40d57e14	Merge pull request #8851 from thinkyhead/bf1_more_scara_scaling [1.1.x] SCARA Feedrate Scaling for G2/G3 - using HYPOT	2017-12-21 21:35:19 -06:00
Scott Lahteine	fdd85a529a	Feedrate scaling for G2/G3	2017-12-20 19:33:16 -06:00
Scott Lahteine	477e36afab	Revert "[bugfix-1.1.x] COREXY stutter moves (planner.cpp changes) (#8697 )" This reverts commit `86b65e52c4`.	2017-12-20 15:59:56 -06:00
Scott Lahteine	1068798465	Restore position_float to LIN_ADVANCE	2017-12-20 06:58:42 -06:00
Scott Lahteine	4f375cd17d	Match sign for filwidth across vars	2017-12-20 00:17:32 -06:00
Thomas Moore	98159c0507	[1.1.x][PlatformIO] Stop compiling after first five errors (#8828 )	2017-12-19 23:59:19 -06:00
Scott Lahteine	ea345b1db7	Merge pull request #8738 from lumbric/bugfix-1.1.x Add missing CPP files to Make file, fixes #8731	2017-12-19 23:46:23 -06:00
Scott Lahteine	ab7f1a0608	A single setting to validate filament width	2017-12-19 21:34:30 -06:00
Scott Lahteine	3929deed10	Add VOLUMETRIC capability item	2017-12-19 20:33:57 -06:00
Scott Lahteine	435981056e	Option to disable all volumetric extrusion	2017-12-19 20:33:41 -06:00
Scott Lahteine	e6f46f3832	Add NO_VOLUMETRICS to example configs	2017-12-19 20:32:40 -06:00
Scott Lahteine	1aea024589	Remove redundant serial sanity check	2017-12-19 19:07:20 -06:00
Scott Lahteine	ce6a691999	Fix #8839 - filament width sensor	2017-12-19 18:24:56 -06:00
Scott Lahteine	10d73155b0	Hide LEVELING item for probeless w/out LCD Leveling	2017-12-17 21:24:46 -06:00
Scott Lahteine	4b1b02a17d	Cleanup M503 output for M420	2017-12-17 21:24:46 -06:00
Scott Lahteine	56d355f8de	Revert "[Bugfix-1.1.x] initial step correction (#8735 )" This reverts commit `ec028bf747`.	2017-12-17 02:04:44 -06:00
Scott Lahteine	f5fc851925	Sanity check parity with 2.0.x	2017-12-17 00:56:44 -06:00
Scott Lahteine	7378905053	Add MKS_12864OLED_SSD1306 to example configs Followup to #8813	2017-12-16 19:58:34 -06:00
Dan Delaney	df8420aa62	Adding support for using the MKS_12864OLED with the SSD1306 controller	2017-12-16 17:44:34 -06:00
lumbric	3a511e4583	Add all CPP files to Makefile automatically Fixes build errors occurring when AUTO_BED_LEVELING_UBL is enabled.	2017-12-16 20:29:47 +01:00
Dan Delaney	5249765508	Adding support for the Tronxy and Zonestar LCD Code borrowed and modified from erikkallen/Marlin_tronxy. Changed the ANET_KEYPAD_LCD to zonestar, since it is the same device. I kept a define for ANET_KEYPAD_LCD to enable ZONESTAR_LCD.	2017-12-15 19:13:31 -06:00
Scott Lahteine	fdf83f1416	Apply ZONESTAR_LCD to example configs	2017-12-15 19:13:31 -06:00
Scott Lahteine	e1b998e40a	More externs and functions in Marlin.h	2017-12-15 18:18:26 -06:00
Scott Lahteine	9a4af6bd7c	Add NANODLP_ALL_AXIS to config examples	2017-12-15 16:05:29 -06:00
robpower	59265034ae	Extended NanoDLP_Z_Move_Sync feature to G4 and G28, Added optional move_sync for all axis.	2017-12-15 16:05:29 -06:00
teemuatlut	0ac0324af2	[1.1.x] TMC driver update (#8712 )	2017-12-15 15:02:39 -06:00
Scott Lahteine	f38f2ace5a	Correct unskew, after all	2017-12-15 14:23:20 -06:00
Dave Johnson	817eb5a5ba	Missing HAS_HEAT_BED conditional Fixes issue found in #8779	2017-12-15 11:36:36 -08:00
Scott Lahteine	f36f91dfb5	Reduce code with no heated bed	2017-12-13 17:59:17 -06:00
Scott Lahteine	172ea8c71c	General code/bitmaps cleanup	2017-12-13 17:57:54 -06:00
Scott Lahteine	da9748fb21	Fix Planner::unskew parity with skew	2017-12-13 17:43:07 -06:00
Scott Lahteine	8519451161	Comment, improve filament width sensor	2017-12-13 02:35:23 -06:00
Scott Lahteine	7c1adff8ad	Separate Dual X un-park from movement	2017-12-11 03:12:59 -06:00
Scott Lahteine	eca1509cb2	Skew should apply per-segment Segmented moves can account for skew points off the edge, while long regular cartesian moves may be off if the skewed destination point is outside movement bounds. Followup to #8729	2017-12-11 03:12:59 -06:00
Scott Lahteine	bdf69db0a8	Extend Skew Correction to UBL	2017-12-11 01:31:14 -06:00
Scott Lahteine	5cce532a29	One or the other?	2017-12-11 00:20:29 -06:00
Scott Lahteine	a20eacaa48	UBL devel debugging flag	2017-12-11 00:20:29 -06:00
Scott Lahteine	4f042533a5	Fix DUAL_X_CARRIAGE with UBL segmented	2017-12-11 00:20:29 -06:00
Scott Lahteine	6e8da93c42	UBL_DELTA => UBL_SEGMENTED	2017-12-11 00:20:29 -06:00
Scott Lahteine	bb33a26e62	Apply const to axis args	2017-12-11 00:20:29 -06:00
Scott Lahteine	da2eaa6b09	Use array refs where possible	2017-12-11 00:20:29 -06:00
Scott Lahteine	8244284116	_buffer_line => buffer_segment	2017-12-11 00:20:28 -06:00
Scott Lahteine	08d9aeff41	Update current position in M852	2017-12-10 23:05:34 -06:00
Scott Lahteine	aa1b4eded6	Have M420 report a changed position	2017-12-10 23:05:34 -06:00
Scott Lahteine	684692091e	Sync and report changed position	2017-12-10 23:05:34 -06:00
Scott Lahteine	ccca1ade2d	Always report position on config load/reset	2017-12-10 23:05:33 -06:00
Scott Lahteine	dc9e469c4c	Tweak M114 detail	2017-12-10 19:15:37 -06:00
Bob-the-Kuhn	ec028bf747	[Bugfix-1.1.x] initial step correction (#8735 ) * tested * forgot one item	2017-12-09 18:20:25 -06:00
Scott Lahteine	009920f393	Followup to #8713	2017-12-09 08:06:22 -06:00
Scott Lahteine	666d95285b	Mention that segments interpolate more	2017-12-09 06:18:41 -06:00
jkur	f4c31565bc	Board definition and PIN assignments for Mini RAMBo1.0a	2017-12-08 23:41:34 -06:00
Scott Lahteine	cf0604da07	Use MB() for Megatronics 3.1	2017-12-08 23:39:47 -06:00
Scott Lahteine	55acb65e27	Updates for stepper parity with 2.0.x Matching changes from #8725	2017-12-08 23:07:52 -06:00
Scott Lahteine	77519e9f14	Tweaks to planner.h	2017-12-08 21:11:17 -06:00
AnHardt	22baf3356a	Apply @AnHardt reverse_pass changes Plus: 3 times 2 float / to 1 float / and 2 float * and, reciprocal is an optimized operation	2017-12-08 21:11:17 -06:00
Bob-the-Kuhn	360c553228	Merge pull request #8718 from Bob-the-Kuhn/1.1x-planner-speed-improvemenr [bugfix-1.1.x] minor planner.cpp speed improvement (follow up to COREXY stutter changes PR #8697)	2017-12-08 18:40:41 -06:00
Scott Lahteine	b4d69527e6	Followup to #8716	2017-12-08 18:18:06 -06:00
Scott Lahteine	4aba382b01	Merge pull request #8715 from thinkyhead/bf1_followup_8713 Followup to #8713	2017-12-08 18:14:57 -06:00
Bob-the-Kuhn	6f38814541	speed improvement	2017-12-08 18:02:57 -06:00
Scott Lahteine	7251850028	Followup to #8713 Fix indentation, use min for constraint, remove obsolete error check	2017-12-08 17:52:44 -06:00
Scott Lahteine	6eb268f63f	Remove old UBL description text	2017-12-08 17:52:44 -06:00
Jonathan Barchi	ae547c3044	Nozzle.cpp: replace incorrect M_2_PI (2/pi) with 2.0 * M_PI	2017-12-08 15:33:24 -08:00
Roxy-3D	23dd2cb6e7	Better off mesh behavior for UBL (#8713 ) * Better off mesh behaviour for UBL * Spacing changes...	2017-12-08 16:36:03 -06:00
Scott Lahteine	8385cddd8d	Followup to #8705	2017-12-08 03:48:24 -06:00
Scott Lahteine	75eb93140f	Discard all CONTINUED blocks on interrupted move	2017-12-08 02:13:51 -06:00
Scott Lahteine	8be7a0b131	FORCE_INLINE before static	2017-12-08 01:31:59 -06:00
Scott Lahteine	cd6468d6de	Fix TEMP_BED_PIN for Mightyboard Rev.E Based on #8685	2017-12-07 21:52:43 -06:00
Scott Lahteine	822254291f	Merge pull request #8702 from bjarchi/fix-1.1.x-probe_bounds Fix - Conditionals_post.h - allow overriding of [min,max] probe point	2017-12-07 21:49:04 -06:00
Scott Lahteine	44800e9899	PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING	2017-12-07 16:46:06 -06:00
Scott Lahteine	6e85c060a9	Apply MULTIPLE_PROBING to example configs	2017-12-07 16:18:53 -06:00
Jonathan Barchi	7c6d33b0d2	Fix - Conditionals_post.h - allow overriding of [min,max] probe points as expected	2017-12-07 10:40:32 -08:00
Bob-the-Kuhn	86b65e52c4	[bugfix-1.1.x] COREXY stutter moves (planner.cpp changes) (#8697 )	2017-12-07 00:08:48 -06:00
Scott Lahteine	6310a00d7e	feed_factor => inverse_secs	2017-12-06 23:02:37 -06:00
Scott Lahteine	6b93d20e4e	Sanity-check skew+UBL	2017-12-06 22:56:20 -06:00
Scott Lahteine	909fac6d90	Update commentary on M48	2017-12-06 22:50:13 -06:00
Scott Lahteine	1951d3a37a	Simplify G26 user_canceled	2017-12-06 22:03:46 -06:00
Scott Lahteine	aa7236e03c	Shorten error text in ubl::G29	2017-12-06 21:43:26 -06:00
Scott Lahteine	574153a810	No lcd_map_control needed in quick_stop	2017-12-06 21:43:26 -06:00
Scott Lahteine	3b30cc90f1	Clean on trigger instead of split_first_move flag	2017-12-06 21:43:26 -06:00
Scott Lahteine	1063b3b2b8	Changes for parity with 2.0.x	2017-12-06 21:19:17 -06:00
Scott Lahteine	93560836de	Allow buffer clean without release command	2017-12-06 21:12:55 -06:00
Scott Lahteine	ff26b7446c	Standardize LCD interface code for UBL a little	2017-12-06 21:12:55 -06:00
Scott Lahteine	7b6ad28a5d	General UBL/G26 code cleanup	2017-12-06 21:12:55 -06:00
Scott Lahteine	5d01a2f467	Move temperature reporting to Temperature class	2017-12-06 21:12:55 -06:00
Scott Lahteine	6e197d4a42	Fix M503 S parameter	2017-12-06 21:12:55 -06:00
Scott Lahteine	a5b20fec2f	Whitespace clean	2017-12-06 16:19:49 -06:00
AnHardt	b19846aca1	Don't split first_move while homing or probing While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.	2017-12-06 14:56:37 +01:00
Scott Lahteine	d951ba83e6	Show "Level Bed Corners" item with UBL too Addressing #8676	2017-12-05 21:56:04 -06:00
Scott Lahteine	203a445bc1	Minimal include for speed_lookuptable	2017-12-05 21:44:59 -06:00
Scott Lahteine	9edefa645d	Remove skew warning that could crash the planner	2017-12-05 20:25:53 -06:00
Scott Lahteine	794f8f1329	Update K1 => PID_K1	2017-12-05 19:59:01 -06:00
revilor	b1f3dfab28	Fix for #8669 (#8677 )	2017-12-05 19:40:57 -06:00
Scott Lahteine	2d6c84a817	Cleanup constexpr in planner.cpp	2017-12-05 18:54:25 -06:00
Scott Lahteine	23291a0466	Fix SKEW_CORRECTION without leveling	2017-12-05 18:47:19 -06:00
Scott Lahteine	83a1a70103	Creality pins spacing, MINIPANEL CS pin	2017-12-05 02:00:33 -06:00
Scott Lahteine	47f6fc1e07	Set initial endstops state Addressing #8662	2017-12-05 01:08:39 -06:00
kein0r	f36fdc74ac	Added RAMPS v1.4 Plus board Conflicts: Marlin/boards.h	2017-12-05 00:43:02 -06:00
Scott Lahteine	ff258d43e7	Merge pull request #8661 from lumbric/bugfix-1.1.x Add missing library in Makefile	2017-12-04 23:50:34 -06:00
Scott Lahteine	d8ef6faa80	Cleanup for dogm_bitmaps	2017-12-04 21:19:59 -06:00
Scott Lahteine	59eb77fd28	One fewer move required…	2017-12-04 20:35:33 -06:00
lumbric (antares)	dde0e9ee0a	Add missing library in Makefile When using RELOC_WORKAROUND library needs to be linked explicitly, otherwise eeprom functions are not available. Thanks to @rfjakob for finding the crucial hint to solve this issue.	2017-12-05 00:20:58 +01:00
Dave Johnson	860d98a897	[1.1.x] SERIAL_XON_XOFF not supported on USB-native AVR devices (#8653 ) * SERIAL_XON_XOFF not supported on USB-native AVR devices User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.	2017-12-04 16:48:19 -06:00
Scott Lahteine	000818f5e4	Split first move to planner for better chaining	2017-12-04 15:43:28 -06:00
Scott Lahteine	298a357a43	Revert "Merge pull request #8608 from thinkyhead/bf1_planner_split_first" This reverts commit `0eef0ff0de`, reversing changes made to `d8582b7506`.	2017-12-03 17:49:24 -06:00
Scott Lahteine	44d2c5ef88	Fix M49 console hang	2017-12-03 03:36:12 -06:00
Scott Lahteine	1600f7d4ee	Merge pull request #8635 from fiveangle/bf1_report_xonxoff [1.1.x] Report SERIAL_XON_XOFF in M115	2017-12-03 02:19:28 -06:00
Scott Lahteine	71a4c04dd5	Merge pull request #8636 from thinkyhead/bf1_ubl_uses_LSL [1.1.x] Use custom segment length for UBL Cartesian	2017-12-03 01:57:32 -06:00
Scott Lahteine	1d0ee83e18	Split first move to planner for better chaining Address #8573, #8595	2017-12-03 01:44:33 -06:00
Scott Lahteine	db8631e49a	Use custom segment length for UBL Cartesian	2017-12-03 00:02:28 -06:00
Unknown	2e295759f2	[1.1.x] Report SERIAL_XON_XOFF in M115 -Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts -Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines config updates -Update error checking conditions	2017-12-02 21:02:02 -08:00
Scott Lahteine	d8582b7506	Bring configurations up to date	2017-12-02 21:42:36 -06:00
dot-bob	7f656b867f	Example configuration files for the Wanhao Duplicator 6 for bugfix-1.1.x (#8614 ) * Add default configuration files for the Wanhao Duplicator 6. * Update Configuration.h	2017-12-02 21:31:14 -06:00
Scott Lahteine	077fed1d88	Fix a homing comment	2017-12-02 20:57:35 -06:00
Scott Lahteine	152c5d2616	Followup to #8613	2017-12-02 20:47:33 -06:00
Scott Lahteine	26c5bbc5a7	Rename inverse_mm_s => inverse_secs	2017-12-02 20:13:31 -06:00
Jonathan Barchi	344e6b857a	configuration_store.cpp: Fix in MarlinSettings::load for updated size of DELTA variables (#8630 )	2017-12-02 19:04:52 -06:00
Roxy-3D	81e52138cc	More corrections for Bi-Linear to work with G26	2017-12-02 14:13:19 -06:00
Roxy-3D	a27a9b63e4	Get Bi_Linear macros correct to work with G26 G26 uses logic that looks like: ``` ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); ``` The Bi-Linear macros need parenthesis to work correctly.	2017-12-02 14:04:41 -06:00
Scott Lahteine	8b7c274db5	Comment/cleanup motion code	2017-12-02 01:42:37 -06:00
Scott Lahteine	7bed539fdb	Fix missing return values in G33_auto_tune	2017-12-02 01:06:14 -06:00
Scott Lahteine	172ce67344	New feature: BED_SKEW_CORRECTION	2017-12-01 19:43:32 -06:00
Scott Lahteine	a8d83aec89	Add SKEW_CORRECTION to example configs	2017-12-01 19:43:31 -06:00
Scott Lahteine	38e5883d44	Apply const to thermal_runaway_protection args	2017-12-01 19:43:31 -06:00
Scott Lahteine	e7c6abd767	Update V45 Settings header	2017-11-30 22:26:21 -06:00
Roxy-3D	9f7405b3f0	Restore correct gMax 1.5+ G26 values	2017-11-30 18:11:01 -06:00
Scott Lahteine	d3f8111fe7	Use some int types in Planner	2017-11-30 18:03:51 -06:00
Scott Lahteine	d1a807fdf8	Drop obsolete Planner::position_float	2017-11-30 17:28:40 -06:00
Scott Lahteine	8df42a84a4	Fix fade bug in (un)apply_leveling	2017-11-30 17:28:40 -06:00
Scott Lahteine	8f462b5717	Add Planner::set_filament_size for 2.0.x parity	2017-11-30 16:52:19 -06:00
Scott Lahteine	68c1f05aeb	Cleanups/changes to led control menu	2017-11-30 00:04:43 -06:00
Scott Lahteine	1f770bb103	Config updates, spacing mainly	2017-11-29 20:57:38 -06:00
Tannoo	e25567a5dd	New feature: LED_CONTROL_MENU	2017-11-29 20:57:38 -06:00
Scott Lahteine	9951f28892	Apply const to some planner vars	2017-11-29 20:57:38 -06:00
Scott Lahteine	80929c2637	Apply SEGMENT_LEVELED_MOVES to example configs	2017-11-29 16:58:16 -06:00
Scott Lahteine	d786fb99e2	Add an option to segment leveled moves	2017-11-29 16:58:15 -06:00
Scott Lahteine	a0fc5f7b52	Minor planner.cpp style changes	2017-11-29 15:00:33 -06:00
Scott Lahteine	ea87cd975d	Tweak to check_axes_activity	2017-11-28 18:39:29 -06:00
Scott Lahteine	fd50f452ff	Whitespace cleanup	2017-11-28 17:49:25 -06:00
Scott Lahteine	6eedb64777	Merge pull request #8586 from AnHardt/1_Fix_WDTO_during_long_DELTA_moves [1.1.x] Fix WDTO during long delta moves	2017-11-28 17:27:08 -06:00
Scott Lahteine	46776de90b	Fix M290 boolval bug Fix #8577	2017-11-28 17:25:14 -06:00
Scott Lahteine	dfcef11bca	Fix #8579 Fan speed code fell into a curly brace	2017-11-28 16:09:37 -06:00
AnHardt	f1757f30cb	Fix Watchdog time out during long lasting DELTA moves During long lasting moves of a delta machine neither the temperatures are maintained nor buttons checked nor ... . The fix is to call 'manage_heater()' and 'idle()' every now and then in the loop where the move is segmented. The code is abot the same as in G2_G3 wher we had the same problem with too large circles lasting too long. Fixing #7510	2017-11-28 17:10:18 +01:00
Scott Lahteine	ddab1533c5	Simplify midpos calculation	2017-11-27 14:01:42 -06:00
Scott Lahteine	915c4b9ce2	Make MBL work more like PROBE_MANUALLY	2017-11-27 00:09:23 -06:00
Scott Lahteine	d7cc26cc17	Allow override of probe bounds in configs	2017-11-26 20:57:00 -06:00
Scott Lahteine	5bc5ba7ee3	More reliable set characters after bootscreen	2017-11-26 20:02:51 -06:00
Scott Lahteine	82df656cc7	Tweak readDir code	2017-11-26 18:23:34 -06:00
Scott Lahteine	51d09bb9c9	Tweak BLOCK_BUFFER_SIZE config	2017-11-26 17:33:33 -06:00
Scott Lahteine	5a1f1305f0	SD Menu patches	2017-11-26 01:10:06 -06:00
Scott Lahteine	3cf31205bc	Tweaks to bed leveling menus	2017-11-26 00:06:10 -06:00
Scott Lahteine	26a40373fc	Adjustments to blocking moves	2017-11-25 23:32:53 -06:00
Scott Lahteine	6b9e7defac	M211 output in current workspace	2017-11-25 20:47:36 -06:00
Scott Lahteine	a63d9cc550	Loosen HAS_BED_PROBE definition	2017-11-25 20:10:03 -06:00
Scott Lahteine	1e84cded98	Parity with 2.0.x bitmap functions Based on #8565	2017-11-25 19:56:22 -06:00
Scott Lahteine	bb0cc1bbbc	Fix gcode_G26 error return	2017-11-25 19:51:03 -06:00
Scott Lahteine	941ffea81c	Fix Micromake C1 config	2017-11-25 18:42:42 -06:00
Scott Lahteine	737cee4b8c	Syntax tweaks	2017-11-25 18:15:16 -06:00
Scott Lahteine	d3165cca4f	Move BABYSTEP_ZPROBE_GFX_OVERLAY up	2017-11-25 17:28:12 -06:00
Scott Lahteine	2060ba3556	M290 report on change, P0 to leave Probe Z Offset unchanged	2017-11-25 16:51:00 -06:00
Scott Lahteine	e56ead5e1c	Followup to G33 patch	2017-11-25 16:01:55 -06:00
LVD-AC	8b9e68c32d	[1.1.x] G33 probe error handing	2017-11-25 15:44:30 -06:00
Scott Lahteine	b2d3fffe74	Patches for M290, M851	2017-11-25 14:10:49 -06:00
Scott Lahteine	b5c5b175f1	Dont use Z_MIN_PROBE_ENDSTOP for DELTA	2017-11-24 18:28:27 -06:00
Thomas Moore	ecf19344f6	Initialize mixing virtual tools to behave like standard a multi-extruder setup (#6853 ) * Initialize mixing virtual tools to behave like standard a multi-extruder setup * Update Marlin_main.cpp * Update Marlin_main.cpp	2017-11-24 18:06:32 -06:00
Scott Lahteine	b2473e57dd	Apply LINEAR_UNIT to M503 output for M200	2017-11-24 17:31:00 -06:00
Scott Lahteine	d38aaa0c7e	Merge pull request #8550 from thinkyhead/bf1_fix_probe_pt Fix #8540	2017-11-24 17:15:05 -06:00
Scott Lahteine	adee17847c	Fix #8540 Does it?	2017-11-24 17:05:42 -06:00
oliver	a7d82bd73b	MK2_MULTIPLEXER does not require E2/E3 stepper pins	2017-11-24 23:58:37 +01:00
Scott Lahteine	59a699063a	Fix #8537	2017-11-24 15:54:03 -06:00
Scott Lahteine	ff800e08fd	Phatter arrows for Z offset overlay	2017-11-24 15:54:03 -06:00
Scott Lahteine	c0190eff00	Adapt MESH_EDIT_GFX_OVERLAY for 1.1.x	2017-11-24 15:54:02 -06:00
Scott Lahteine	4e445f2c55	Keep Micromake C1 name on LCD?	2017-11-24 13:18:34 -06:00
Scott Lahteine	9da817eae0	Make LCD_LANGUAGE consistent in all configs	2017-11-24 13:18:34 -06:00
Scott Lahteine	7cf4009838	Fix MK2_MULTIPLEXER stepper indirection Addressing #8544	2017-11-24 12:47:10 -06:00
Rob Power	f8e30f49d7	Add NanoDLP Z movement synchronization option Implemented synchronization message output for NanoDLP printers (nanodlp.com). If optional feature is enabled in `Configuration_adv.h`, Marlin will ouput "Z_move_comp" string to serial after completing any G0/G1 Z-axis movements. This feature patched on previous versions(1.0) is used by NanoDLP to synchronize Z-axis movement with projector exposure in DLP stereolithography printers.	2017-11-24 00:32:03 -06:00
Scott Lahteine	3b431f2f72	Arrange G26 functions in dependency order	2017-11-23 22:30:22 -06:00
Scott Lahteine	e5b43d48ee	Apply G26 for meshes to all configs	2017-11-23 21:41:27 -06:00
Roxy-3D	8282d732c1	Make G26 work with all mesh leveling. Example Configuration.h files are not updated yet. You need to cross your settings over to the default Configuration.h file in the \Marlin directory. (UBL_G26_MESH_VALIDATION enablement has moved to a new location in the file.)	2017-11-23 21:41:27 -06:00
Scott Lahteine	82f41d6e46	fix fan kickstart	2017-11-23 21:40:31 -06:00
Scott Lahteine	b8c65078fc	NEOPIXEL_RGBW_LED => NEOPIXEL_LED	2017-11-23 16:41:04 -06:00
Scott Lahteine	04419af419	Reorganize check_axes_activity	2017-11-23 15:29:35 -06:00
Scott Lahteine	ed6a5ff7e5	Merge pull request #8524 from GMagician/1.1.x-tool-change-bad-behaviour-fix [1.1.x] Tool change bad behaviour fix	2017-11-22 20:23:02 -06:00
Scott Lahteine	956680104b	Tweak char_mode init	2017-11-22 19:10:54 -06:00
Scott Lahteine	99b71c1dde	Move lcd_map_control to UBL For parity with bugfix-2.0.x	2017-11-22 18:45:55 -06:00
Scott Lahteine	73ddc762c8	Fix up LCD init / charset	2017-11-22 18:07:03 -06:00
GMagician	7a5b3a1e6a	[1.1.x] Tool change bad behaviour fix Just aligned with version 2.0. Here bug was not present	2017-11-22 23:51:07 +01:00
Scott Lahteine	e2568d7589	Fix delta_safe_distance_from_top	2017-11-22 14:11:04 -06:00
Scott Lahteine	0b1d754e7d	Fix G42	2017-11-22 14:11:04 -06:00
Scott Lahteine	bbc2ee6da1	Don't re-init graphical LCD after boot screen Followup to `13a3fb1acc`	2017-11-21 18:21:50 -06:00
GMagician	b96ceb4256	[1.1.x] tool change bad behaviours This PR will address two issues reported in #8492. Just one is left because I don't know if it is an issue or not 1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current. 2) Since no move no bed level matrix should be applied When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed	2017-11-20 16:39:32 -06:00
Scott Lahteine	b6dbc4c5c1	Merge pull request #8426 from SteveGotthardt/bugfixes [1.1.x]Update Anet A8 default values from my Anet A8 experience	2017-11-20 15:12:46 -06:00
Bob-the-Kuhn	12b018e619	Merge pull request #8487 from Bob-the-Kuhn/M43-compatibility-1.1.x [1.1.x] M43 end pin correction/compatibility	2017-11-19 11:01:10 -06:00
Bob-the-Kuhn	9b80e1e04a	change to L for end pin for M43 Toggle command	2017-11-18 13:48:53 -06:00
Scott Lahteine	bf6a1816b4	Display volumetric ratio in terms of E mm	2017-11-18 07:03:18 -06:00
Scott Lahteine	4f05a66ee1	Fixes #8472	2017-11-18 05:14:31 -06:00
Scott Lahteine	622d100c30	No retroactive changes with M851 Z	2017-11-18 03:37:07 -06:00
Scott Lahteine	74997a5251	Fix comment in planner.h	2017-11-18 02:30:41 -06:00
Roxy-3D	50148f7185	Update the UBL Probable Area for Delta's This is a non-intuitive change. @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits. This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.	2017-11-17 16:41:31 -06:00
Scott Lahteine	8f57a3e28a	Apply coding standards to Max7219 code	2017-11-17 15:33:55 -06:00
Scott Lahteine	2511e869e2	Update Configuration.h	2017-11-16 23:18:55 -06:00
Scott Lahteine	aa612124f2	Merge pull request #8452 from tcm0116/1.1.x-pio_deps [1.1.x] Fix PlatformIO dependencies	2017-11-16 22:54:15 -06:00
Scott Lahteine	eb3bdb7550	Fix FILAMENT_LCD_DISPLAY, disabled state, optimize	2017-11-16 17:46:08 -06:00
Thomas Moore	97c19de8b9	Fix PlatformIO dependencies	2017-11-16 15:16:21 -06:00
Scott Lahteine	4e19c59ab3	Miscellaneous cleanup	2017-11-16 01:18:05 -06:00
Scott Lahteine	9cf5b96971	Fix M503 output for M145 Fixes #7978	2017-11-15 04:00:39 -06:00
Scott Lahteine	69a710fef1	Add OV() macro for thermistor tables	2017-11-15 03:20:36 -06:00
Scott Lahteine	d2613ce077	Merge pull request #8432 from thinkyhead/bf1_fix_M32_subroutines [1.1] Fix 'M32 P' subroutines	2017-11-15 02:31:21 -06:00
Scott Lahteine	f2e222b9e8	Merge pull request #8419 from RowanMeara/rm-dithering-1.1.x [1.1.x] Fix Software Fan PWM	2017-11-15 02:29:59 -06:00
Scott Lahteine	a6ee4a0468	Apply SDCARD_SORT_ALPHA changes from 2.0.x	2017-11-15 01:09:13 -06:00
Scott Lahteine	d3b8f30818	Fix M32 P subroutine handling	2017-11-15 01:09:06 -06:00
Scott Lahteine	2390f6d3ab	Cleanup, apply standards to SD lib, cardreader	2017-11-15 01:09:06 -06:00
Scott Lahteine	eacb6b6e8b	Fix parser value handling	2017-11-14 23:23:22 -06:00
Steven Gotthardt	7efffc1548	Update Anet A8 default values from my Anet A8 experience	2017-11-14 10:47:30 -07:00
RowanMeara	10e366ebd7	Change dithering behavior to intended.	2017-11-14 00:36:35 -08:00
Scott Lahteine	95590adf07	Make sure `leveled[]` is enabled for use	2017-11-14 02:12:20 -06:00
Scott Lahteine	8d06cf7b84	Add M114_DETAIL to Configuration_adv.h	2017-11-14 00:06:35 -06:00
Steven Gotthardt	645b586041	Fix warnings for REPRAPWORLD_KEYPAD	2017-11-13 22:25:17 -06:00
Scott Lahteine	069ec3f9a9	Move Filament Width Sensor to Configuration_adv.h	2017-11-13 21:06:40 -06:00
Scott Lahteine	56035e9965	Move mesh test options under G26 option	2017-11-13 21:06:40 -06:00
Scott Lahteine	d65c99f38b	Drop unused LARGE_FLASH option	2017-11-13 15:47:03 -06:00
Scott Lahteine	90c7d28055	Extrudrboard support for Printrboard Rev.F	2017-11-13 15:47:03 -06:00
Scott Lahteine	8b684637bc	Merge pull request #8397 from RowanMeara/rm-M428-1.1.x [1.1.x] Fix M428	2017-11-13 15:11:36 -06:00
Rowan Meara	d2df00bfca	[1.1.x] Fix compilation warnings (#8395 ) * Fix up Travis CI and compile warnings/errors * No ULTRA_LCD with REPRAP_DISCOUNT_SMART_CONTROLLER * No point in setting all the endstop plugs	2017-11-13 04:18:19 -06:00
Scott Lahteine	25ec0fecfa	Apply native workspace fixes to G92, G53-59	2017-11-13 01:53:44 -06:00
RowanMeara	227b96b28b	Fix M428 This fixes the old implementation of M428 which was broken, did not match the website, and made no sense.	2017-11-13 01:34:43 -06:00
Scott Lahteine	a2c013c8c7	Fix LCD pins for Printrboard v1	2017-11-13 00:10:27 -06:00
Scott Lahteine	f27196214b	Fix Printrboard pins for parity with 2.0	2017-11-13 00:03:11 -06:00
Scott Lahteine	aa616cd410	No leveling data in M114 without leveling	2017-11-12 23:06:16 -06:00
Scott Lahteine	5926159890	Fix report_current_position Thanks @RowanMeara!	2017-11-12 22:57:57 -06:00
Roxy-3D	c9f88297b8	Provide more clearance for BL-Touch probe	2017-11-12 13:09:10 -06:00
Scott Lahteine	5cc87abb3a	Merge pull request #8381 from thinkyhead/bf1_native_followup [1.1] Remove offsets from soft endstops, tool change	2017-11-11 23:13:40 -06:00
Scott Lahteine	355dfed437	Coding standard patch of M290	2017-11-11 22:16:13 -06:00
Scott Lahteine	802ae73b13	Turn off laser power pin when PWM goes to 0	2017-11-11 22:02:19 -06:00
Scott Lahteine	549c814e8d	Remove offsets from soft endstops, tool change	2017-11-11 21:28:32 -06:00
Scott Lahteine	564fbc8dec	M290 constrain patch	2017-11-11 20:50:16 -06:00
Scott Lahteine	df44bcc5ae	Use do_blocking_move_to where possible	2017-11-10 20:37:41 -06:00
Scott Lahteine	3293823642	Add pre-calculated planner.e_factor	2017-11-10 20:09:59 -06:00
Scott Lahteine	24b302c001	Fix cold/lengthy extrusion handling	2017-11-10 20:09:59 -06:00
Thomas Moore	4714fb8fcb	Normalize load/unload length in M600	2017-11-10 19:59:26 -06:00
Scott Lahteine	b0ff3a4c6d	Cleanup around updatePID	2017-11-10 19:17:46 -06:00
Scott Lahteine	7aadfe32e7	Prevent position_is_reachable disaster	2017-11-10 19:17:45 -06:00
LVD-AC	8ce9306b27	PROBE_SELECTED etc.	2017-11-10 19:17:45 -06:00
Scott Lahteine	80682ec61e	Updates Traditional Chinese, rebase for bugfix-1.1.x	2017-11-10 04:49:09 -06:00
Scott Lahteine	deaa70c2cc	Update macros for parity with 2.0.x	2017-11-10 04:32:27 -06:00
Scott Lahteine	7535c21894	Remove some trailing white-space	2017-11-10 03:38:58 -06:00
Roxy-3D	8327667988	Correct gMax 1.5+ nozzle size to the right number Also... Doing a 'Direct Commit' to see if that is 'acceptable' for small changes like this. I want to look at the commit history and see how the logs handle this type of change.	2017-11-09 20:00:55 -06:00
Scott Lahteine	b6b4bf0959	Merge pull request #8345 from tcm0116/1.1.x-delta_height [1.1.x] Add delta_height variable in lieu of using home_offset	2017-11-09 01:19:48 -06:00
Thomas Moore	658e1ebe5a	Add delta_height variable in lieu of using home_offset	2017-11-08 23:21:02 -06:00
Scott Lahteine	54963cc898	Fix _manual_goto_xy on kinematic systems	2017-11-08 23:18:55 -06:00
Scott Lahteine	ad879a1f90	Clarify some motion code	2017-11-08 23:18:55 -06:00
Scott Lahteine	513f25d42c	Remove redundant dual stepper driver entries	2017-11-08 20:26:54 -06:00
Scott Lahteine	2559745f54	Tweaks to core motion code	2017-11-08 20:08:20 -06:00
Scott Lahteine	7326fe1136	Fix tilt_mesh_based_on_probed_grid output bug	2017-11-08 20:07:02 -06:00
Scott Lahteine	97a43f0c2f	Fix G26 Y position argument	2017-11-08 19:19:21 -06:00
Scott Lahteine	87b655e59e	Fix gcode_get_destination E axis	2017-11-08 12:50:40 -06:00
Roxy-3D	677d490b5c	Add defaults for basic extrusion to Configuration.h files (#8331 )	2017-11-08 11:02:47 -06:00
Roxy-3D	6ee4ba6932	We need motion even with !HAS_MESH (#8330 ) Thank You MagoKimbra !	2017-11-08 09:58:18 -06:00
Scott Lahteine	4a857f1af6	Followup to G33/LCD patch #8318	2017-11-08 00:46:30 -06:00
Scott Lahteine	1d0739d6d1	Patch G33 misuse of PROBE_MANUALLY	2017-11-07 22:28:54 -06:00
Scott Lahteine	69a7d4e0a5	Conditionals updates from #7979	2017-11-07 21:20:38 -06:00
Scott Lahteine	5fe15c7f10	Patch abuse of sprintf_P in G33	2017-11-07 17:35:32 -06:00
Rowan Meara	094bebcc2d	[1.1.x] Update Thermal Protection Documentation (#8282 ) * Fix thermal protection documentation. Even before the recent thermal protection changes, the documentation of the thermal protection feature in the config files did not match the implementation. I fixed the documentation and reconciled the M303 implementation with the documentation. * Applied documentation changes to sample config files * Renamed hysteresis to watch_temp_increase * Added gcodes back into documentation.	2017-11-07 15:52:28 -06:00
Scott Lahteine	abb15bc30a	Followup patch for G92	2017-11-07 13:08:38 -06:00
Scott Lahteine	8e18e05d1d	Merge pull request #8309 from thinkyhead/bf1_fixes_for_117 [1.1] Fix G92 for native workspace	2017-11-07 12:52:55 -06:00
Scott Lahteine	aa80882bdf	Merge pull request #8306 from Kaibob2/patch-4 Length fix and translation	2017-11-07 12:27:37 -06:00
Scott Lahteine	e4466b55b5	Fix G92 for native workspace	2017-11-07 12:27:05 -06:00
Kai	b60efb4230	Length fix and translation If #define MSG_Z_FADE_HEIGHT is xx.xx then the last character is crashing into the value	2017-11-07 18:16:30 +01:00
Thomas Moore	2f4a42b313	Fix Delta EEPROM	2017-11-07 16:55:06 +00:00
Scott Lahteine	e1ab285435	Fix some section sizes in EEPROM head comment	2017-11-06 22:41:27 -06:00
Scott Lahteine	26ebeadfaa	Eliminate some compiler warnings	2017-11-06 22:41:27 -06:00
Scott Lahteine	30e4b85587	Fix M118 parameters, with strict guideline	2017-11-06 22:41:27 -06:00
Scott Lahteine	44edffa0a9	Fix SLOW_PWM_HEATERS, issues already patched in 2.0.x	2017-11-06 22:40:44 -06:00
Scott Lahteine	ddf5d68815	Fix non-extended font option	2017-11-06 21:43:18 -06:00
Scott Lahteine	298863c2d0	Tweak an EEPROM loop	2017-11-06 20:16:57 -06:00
Rowan Meara	8e8787ad63	Fixed EEPROM CRC (#8283 ) Fix EEPROM reversion.	2017-11-06 19:18:42 -06:00
Roxy-3D	12151e62ee	Fix G26's circle drawing... (#8291 ) * Fix G26's circle drawing... This mostly catches the bugfix-v1.1.x branch up to bugfix-v2.0.0 I'll have to do something similar to get bugfix-v2.0.0 caught up to bugfix-v1.1.x * only use planner.leveling_active if appropriate	2017-11-06 18:26:47 -06:00
Scott Lahteine	efc1029226	Update bilinear for native workspace	2017-11-06 17:03:34 -06:00
Scott Lahteine	1b09733e7c	Fix FWRETRACT un-hop	2017-11-05 18:33:10 -06:00
Scott Lahteine	d8ef9bda18	Fix point_t pointer in Nozzle::zigzag	2017-11-05 18:32:32 -06:00
Scott Lahteine	267c247da7	Cleanup Nozzle class, fix XY vs Z move order	2017-11-05 18:14:18 -06:00
Scott Lahteine	8ab368559a	Implement CNC_COORDINATE_SYSTEMS	2017-11-04 22:30:23 -05:00
Scott Lahteine	bb111b928b	Add CNC_COORDINATE_SYSTEMS to configs	2017-11-04 22:30:23 -05:00
Scott Lahteine	91abf07087	Cleanup and fix G33	2017-11-04 22:30:23 -05:00
Scott Lahteine	e642a64b68	Prettify some EEPROM code	2017-11-04 22:00:45 -05:00
Scott Lahteine	64f077fd2a	Remove I2CPEM workspace offset	2017-11-04 22:00:45 -05:00
Scott Lahteine	5fefa200ba	Tweaks to cubic_b_sline code style	2017-11-04 22:00:45 -05:00
Kris Kersey	46c2841904	Added support for Anet LCD on Ramps board. Working pin map for Anet LCD display. Pins 1 and 2 must be swapped on cable.	2017-11-04 21:30:08 -05:00
Scott Lahteine	f9f0ee0f21	Update G2/G3 Workspace Planes	2017-11-04 14:35:25 -05:00
Scott Lahteine	640526f0c8	Operate in Native Machine Space	2017-11-03 22:40:30 -05:00
Scott Lahteine	9af9596f69	Merge pull request #8241 from machaj/fix-links-to-probes Fix probes configuration url	2017-11-03 13:36:20 -05:00
Jan Macháček	0c4e9980fb	Fix probes configuration url	2017-11-03 14:42:02 +01:00
AnHardt	13a3fb1acc	Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()' Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'. Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'. Move the delays into the related functions. Move the picture loop around 'lcd_kill_screen()' into the function.	2017-11-03 12:16:42 +01:00
Scott Lahteine	343dd1c0b8	Remove G33 trailing whitespace	2017-11-03 04:06:38 -05:00
Scott Lahteine	64029ef8a6	Merge pull request #8179 from thinkyhead/bf1_config_tweak [1.1.x] Faster menu navigation for Anet A8	2017-11-03 03:59:21 -05:00
Scott Lahteine	524f4ee0cf	Tweak to M330 thermal protection	2017-11-03 03:57:11 -05:00
Scott Lahteine	34aeaec553	Remove ADKey steps acceleration	2017-11-03 03:42:52 -05:00
Luc Van Daele	0e4b6b373d	[1.1.x] G33 magic numbers (#8173 ) * [1.1.x] G33 magic numbers * oops * comments * oops * warning * better comment section * remarks * extra grids	2017-11-03 03:35:53 -05:00
Scott Lahteine	193a0e9273	pid_autotune parity with 2.0.x	2017-11-03 03:26:47 -05:00
Rowan Meara	39cc36d3f1	[1.1.x] M303 thermal runaway protection (#8209 ) * Added M303 thermal runaway protection Currently, thermal runaway protection is not available during M303. Therefore, if someone plugs the thermistors in incorrectly and goes to autotune their printer, the printer temperature could runaway and damage could occur. * Replace removed line, clarifying its logic	2017-11-03 03:16:39 -05:00
Scott Lahteine	87d3a1ae4d	Merge pull request #8228 from tcm0116/1.0.x-dual_stepper [1.1.x] Fix automatic stepper assignment for X/Y/Z dual stepper drivers	2017-11-03 03:08:43 -05:00
AnHardt	dcd7949544	Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR	2017-11-03 04:45:13 +01:00
Thomas Moore	277eb16d67	Fix automatic stepper assignment for X/Y/Z dual stepper drivers	2017-11-02 18:50:25 -05:00
jmdearras	c9980c0a5c	Restore MKS_GEN_L Removed by accident, I presume, when the file was cleaned up	2017-11-02 12:14:54 -04:00
jmdearras	3e9504d306	Fix case light "off" function (#8205 ) * Fix case light "off" function It would only turn the light off if brightness was 255 * Update Marlin_main.cpp	2017-11-01 21:17:23 -05:00
Scott Lahteine	4bf0e15653	Allow asterisks in G-Code commands Addressing #6655	2017-10-31 21:14:56 -05:00
Scott Lahteine	f02ca2a9a3	Organize boards.h by architecture	2017-10-31 16:12:07 -05:00
Scott Lahteine	4fb3ce4739	Support for SilverGate Board	2017-10-31 15:26:27 -05:00
Scott Lahteine	704640bf98	Faster menu navigation for Anet A8 Addressing #8166	2017-10-31 14:44:48 -05:00
Scott Lahteine	db6de76acb	Only show custom bootscreen once	2017-10-31 01:52:35 -05:00
GMagician	15be1cb9a9	[1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour (#8177 ) * [1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done. E axes should be allowed * Update Marlin_main.cpp * Update Marlin_main.cpp * Update Marlin_main.cpp	2017-10-30 22:50:50 -05:00
Scott Lahteine	893092ff7f	Kinematic clamp_to_software_endstops	2017-10-30 16:24:45 -05:00
Scott Lahteine	8b7c1e9cec	Fix for MAX_VFAT_ENTRIES sanity check	2017-10-30 16:24:45 -05:00
Scott Lahteine	393ceb28fc	The plural of 'axis' is 'axes'	2017-10-30 14:49:51 -05:00
Scott Lahteine	d9cb7be444	Merge pull request #8160 from thinkyhead/bf1_fixup_sd_reprint [1.1.x] Simplify SD_REPRINT_LAST_SELECTED_FILE	2017-10-29 23:57:44 -05:00
Scott Lahteine	5837f067cf	Tweak to QUICK_HOME comment	2017-10-29 23:50:02 -05:00
Scott Lahteine	5e5a177934	No hacks needed for SD_REPRINT_LAST_SELECTED_FILE	2017-10-29 22:44:03 -05:00
Scott Lahteine	0b5b03d9dc	Tweak for soft endstops	2017-10-29 20:16:22 -05:00
Scott Lahteine	9288d80613	Merge pull request #8156 from thinkyhead/bf1_anet_10_servo [1.1.x] Define a default SERVO0_PIN for Anet 1.0	2017-10-29 19:53:49 -05:00
Scott Lahteine	6698db29de	Update LCD draw condition	2017-10-29 19:17:32 -05:00
Scott Lahteine	25e86a520d	Merge pull request #8114 from thinkyhead/bf1_print_sd_file_again [1.1.x] Cleanup for SD Print Again	2017-10-29 19:09:34 -05:00
Scott Lahteine	b0e282a74b	Cleanups for SD_REPRINT_LAST_SELECTED_FILE	2017-10-29 19:02:17 -05:00
Scott Lahteine	46ed54cd8e	Include time scale in some planner vars	2017-10-29 18:48:14 -05:00
Scott Lahteine	9c870baf84	Add a hidden 8s watchdog option for easier debugging	2017-10-29 18:34:57 -05:00
Scott Lahteine	471c2b5d5c	Provide a default SERVO0_PIN for Anet 1.0	2017-10-29 18:34:57 -05:00
Scott Lahteine	e792c2b234	Followup to #8123 - to match 2.0.x changes	2017-10-29 05:39:44 -05:00
Scott Lahteine	daa85f71e1	Merge pull request #8123 from thinkyhead/bf1_dual_xyz_endstops [1.1.x] Dual endstops XYZ	2017-10-29 04:36:09 -05:00
Rowan Meara	9850ba0cbd	[1.1.x] Fix M303 thermal protection #8103 (#8126 ) * Fixed M303 thermal protection The temperature sanity checking logic was not being applied during M303 (pid autotuning) because instead of setting a target temperature, it directly manipulated the pwm values. When PIDTEMP/PIDTEMPBED is enabled, PWM values rather than the target temperature determine whether the heater is on. I changed this to look directly at the PWM amount when pid is enabled. * Turn off heaters on M303 error Currently, PID autotuning stops if it overshoots the temperature by 20C or if if the temperature does not change for 20 minutes and it times out. I added calls to disable the heaters in these scenarios. * Removed unnecessary if statement. Added changes suggested by GMagician. * Update temperature.cpp * Update temperature.cpp * Update temperature.cpp	2017-10-29 04:34:47 -05:00
Scott Lahteine	318c419f77	Implement support for Dual X and Y endstops	2017-10-29 03:49:45 -05:00
Scott Lahteine	7e1232269a	Add Dual Steppers / Endstops to configs	2017-10-29 03:49:45 -05:00
Scott Lahteine	62d52d62dc	Cleanup for DIGIPOTS settings	2017-10-29 03:49:32 -05:00
LVD-AC	77cf42588f	(1.1.x) serious bug G33	2017-10-29 00:22:55 +02:00
Scott Lahteine	a979c428ee	Revert default BABYSTEP_MULTIPLICATOR to 1	2017-10-27 19:42:51 -05:00
jmdearras	6920769a9a	Added MKS GEN L board (#8088 ) [1.1.x] Add MKS GEN L board	2017-10-27 02:13:41 -05:00
Scott Lahteine	410aa0716d	Concise SD_REPRINT_LAST_SELECTED_FILE description	2017-10-27 00:10:04 -05:00
Scott Lahteine	445a7f65cd	Clean up trailing whitespace	2017-10-27 00:02:35 -05:00
Luc Van Daele	e64cfb13b8	(1.1.x) auto tune calibration parameters (#8031 ) * auto tune calibration parameters * solve warnings * Tweaks to formatting * review Thinkyhead * Error	2017-10-26 23:49:20 -05:00
Scott Lahteine	2296d98845	Tweak neopixel self-test	2017-10-26 22:46:11 -05:00
Scott Lahteine	9aac3d8773	Add some Polish translations Thanks @SCiunczyk	2017-10-26 22:44:23 -05:00
Scott Lahteine	6569b9ba56	Fix FWRETRACT logic, apply common sense	2017-10-26 22:36:41 -05:00
Bob-the-Kuhn	7ab9abe4ef	Merge pull request #8107 from Bob-the-Kuhn/1.1.x-reduced-font-fix (bug fix) 1.1.x - save 1400 bytes of FLASH by using reduced font for some languages	2017-10-26 16:09:52 -05:00
Bob-the-Kuhn	3357170b18	give this language an unique name	2017-10-26 15:48:00 -05:00
Roxy-3D	2e746f2b8b	Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE (#8104 ) * Initial conflict resolution All previous items resolved: - Use of ELAPSED() on timer code - Switch to use of defer_return_to_status=true as much as possible - Update & Clean Up of Max7219 routines * Resolve non-SD case in ultralcd.cpp	2017-10-26 11:44:55 -05:00
Bob-the-Kuhn	594c075377	1.1.x - save 1400 bytes of FLASH by using reduced font for some languages (#8095 ) * use reduced sized font for some languages * Fit Portuguese language files to existing scheme * Rename language_pl-DOGM.h to language_pl_utf8.h * Rename language_pl_utf8.h to language_pl-DOGM.h * Update dogm_font_data_ISO10646_1.h * Update dogm_font_data_ISO10646_1.h	2017-10-25 18:32:38 -05:00
Scott Lahteine	8bb1e91afd	More specific M100 description	2017-10-25 16:11:09 -05:00
Scott Lahteine	a12d1b21b5	Merge pull request #8048 from madmo/mks-mini-gt2560 [1.1.x] Add MKS MINI 12864 support to GT2560	2017-10-25 01:13:07 -05:00
Scott Lahteine	5bed2f351a	Fix spacing, use single instances of similar pins	2017-10-24 19:12:40 -05:00
Scott Lahteine	ec9d7b639d	Encourage users to re-examine their configs	2017-10-24 18:33:31 -05:00
Scott Lahteine	1c97c1582c	Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h	2017-10-24 18:25:50 -05:00
Scott Lahteine	f06f4b40b8	Apply physical limits to mesh bounds	2017-10-24 16:49:00 -05:00
Scott Lahteine	3235beef6d	Merge pull request #8073 from thinkyhead/bf1_fix_M600 [1.1.x] Fix position sync in M600 pause/resume	2017-10-24 14:56:01 -05:00
Scott Lahteine	e5ab783b08	Merge pull request #8061 from thinkyhead/bf1_general_cleanup [1.1.x] Patch up some verbiage in configs	2017-10-24 14:44:31 -05:00
Scott Lahteine	355ebec92d	Fix position sync in M600 pause/resume	2017-10-24 14:41:54 -05:00
montri2025	fa157f08ff	lcd <20 disply Bed Temperature cast ty (#8068 )	2017-10-23 23:46:26 -05:00
Scott Lahteine	39a545b3f8	Patch up some verbiage in configs	2017-10-22 17:14:50 -05:00
Roxy-3D	e9bc9a2ab4	change to better (more clear) names (#8049 ) set_destination_to_current() changed to set_destination_from_current() set_current_to_destination() changed to set_current_from_destination()	2017-10-21 10:58:17 -05:00
Moritz Bitsch	b22c87183f	Add MKS MINI 12864 support for GT2560	2017-10-21 13:05:21 +02:00
tweichselbaumer	fa44130734	Add M290 babystepping (#8014 ) * Add M290 babystepping * Allow `Z` for `M290` * fix spacing * Support BABYSTEP_XY in M290 * Not just Z * Extend M290 for BABYSTEP_ZPROBE_OFFSET * tweak	2017-10-21 03:58:53 -05:00
MetalSearch	9b3f27f02a	Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041 ) [1.1.x] Fix EndStops don't work with BOARD_RAMPS_14_EFB on Micromake C1	2017-10-21 00:24:22 -05:00
Scott Lahteine	a7398a0459	Prevent SDCARD_SORT_ALPHA from exploding	2017-10-20 19:14:11 -05:00
Scott Lahteine	91c5c2538a	Add SCROLL_LONG_FILENAMES advanced option Based on #7637 by @marcio-ao	2017-10-20 19:14:10 -05:00
Scott Lahteine	259cf1b0b2	BQ enables this in the config. Remove here	2017-10-18 23:23:56 -05:00
Scott Lahteine	2338632270	Simplify Cartesian probing bounds Followup to #8011	2017-10-18 17:16:14 -05:00
Luc Van Daele	2a88a3fd33	boolval revised (#8017 )	2017-10-18 14:19:01 -05:00
Thomas Moore	84470f6b2a	Update UBL mesh boundaries to accomidate beds centered at 0, 0 (#8011 )	2017-10-18 10:03:00 -05:00
studiodyne	e04902f589	Add EXTRA_FAN_SPEED feature	2017-10-16 02:32:30 -05:00
Scott Lahteine	d63d08ef8b	Merge pull request #7948 from gallynero/patch-1 Enable change feedrate in delta	2017-10-15 16:28:45 -05:00
Scott Lahteine	5c2ff6ed19	Add Capability BUILD_PERCENT	2017-10-15 03:01:36 -05:00
Scott Lahteine	5f708d47ce	Add LCD_SET_PROGRESS_MANUALLY	2017-10-15 02:21:09 -05:00
Scott Lahteine	3b4b9c6d68	Unaccented French for Character Display	2017-10-14 20:17:29 -05:00
MetalSearch	8df47d76c7	Add control board MAKEBOARD Mini +Add French language without accent for japanese LCD	2017-10-14 20:10:03 -05:00
Scott Lahteine	be55a49946	Merge pull request #7980 from thinkyhead/bf1_granular_sw_endstops [1.1.x] Software endstop options by axis	2017-10-14 17:37:35 -05:00
Scott Lahteine	e05af35678	Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs	2017-10-14 17:14:19 -05:00
Scott Lahteine	060d16d26b	Split the software endstop capability by axis. Based on #7975 and #7979	2017-10-14 17:14:08 -05:00
Scott Lahteine	e17869ca20	Fix Emergency Parser Followup to #7459	2017-10-14 15:58:07 -05:00
Scott Lahteine	662105c1b6	ADC sensor fix inspired by 'Evgen2' on Twitter	2017-10-14 02:39:13 -05:00
Scott Lahteine	b8ddae61e2	ubl_state no longer needed	2017-10-14 02:39:13 -05:00
Scott Lahteine	ece14af556	Improve LCD leveling value edits	2017-10-14 02:39:13 -05:00
Scott Lahteine	b07a2aa23c	Add HAS_MESH conditional	2017-10-14 02:39:12 -05:00
Scott Lahteine	88857e8028	Move fade_scaling_factor_for_z to Planner	2017-10-14 02:10:46 -05:00
Scott Lahteine	8e808fcadc	General cleanup, apply const	2017-10-13 16:13:36 -05:00
Scott Lahteine	da93a272a0	Move leveling_is_active to a macro	2017-10-13 16:11:27 -05:00
Scott Lahteine	3d5b10735f	Remove obsolete UBL z_offset	2017-10-13 08:23:01 -05:00
gallynero	94228d4522	Enable change feedrate in delta Enable change the relative feedrate on a printing job in delta machines with UBL	2017-10-12 01:55:51 +02:00
Slawomir Ciunczyk	167058b61f	Different NEOPIXEL types Changes to support NEOPIXEL LED strips - Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h - ability to setup startup brightness - ability to define sequential/non-sequential transition of color change during heating-up - additional parameter to M150 P<brightness>	2017-10-10 01:58:40 -05:00
Scott Lahteine	f835245ee1	Merge pull request #7908 from thinkyhead/bf1_goodbye_legacy_advance [1.1.x] Remove legacy ADVANCE feature	2017-10-10 00:31:39 -05:00
Scott Lahteine	38110e220d	Segmented manual moves for kinematics	2017-10-09 23:10:17 -05:00
deram	9239fcf0da	Allow UBL G29 and G26 to build without a probe	2017-10-09 18:37:53 -05:00
Scott Lahteine	381ebc043f	Add support for ST7565-64128N Based on #7447 by @Bob-the-Kuhn	2017-10-09 17:39:03 -05:00
jmdearras	c7e0a49c94	Add some new LCD displays - Original CR-10 - MKS Mini Display	2017-10-09 17:39:03 -05:00
Scott Lahteine	067622fcc6	Apply some tweaks based on 2.0.x	2017-10-09 17:39:03 -05:00
Scott Lahteine	ae256576e1	Bring configs into parity with 2.0.x	2017-10-09 17:38:39 -05:00
Scott Lahteine	cbfcce09fa	Remove legacy ADVANCE feature	2017-10-09 04:27:45 -05:00
Scott Lahteine	a21201a713	LCD filename already concatentated	2017-10-07 15:14:58 -05:00
Scott Lahteine	53f2f188f2	LCD filename already concatenated	2017-10-07 15:11:28 -05:00
Scott Lahteine	a6e95c7d25	Fix display issue with SD_ALPHA_SORT caching	2017-10-07 15:07:05 -05:00
Dave Johnson	97e6663bb3	[1.1.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled (#7878 ) * Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM. add HD44780 too * Reduce lines used * Reduce lines used	2017-10-07 15:00:56 -05:00
Scott Lahteine	e2ceb1b800	Merge pull request #7632 from GMagician/Wrong-sanitycheck-message-fix Addressing #7612	2017-10-07 02:25:35 -05:00
Scott Lahteine	8c93295d62	Merge pull request #7873 from thinkyhead/bf1_anet_encoder_pulses [1.1.x] Fixing ANET encoder pulses	2017-10-07 01:21:14 -05:00
Phr3d13	c26242a553	Fixing #7833	2017-10-07 00:07:24 -05:00
Scott Lahteine	dac5f20a01	Patch SD file draw bug	2017-10-06 23:53:08 -05:00
Scott Lahteine	b211fa4e1f	Remove extra NEWPANEL settings in Conditionals_LCD.h	2017-10-06 17:23:32 -05:00
LVD-AC	355cba4aa7	Fixes for G33	2017-10-06 15:52:53 -05:00
Scott Lahteine	e287e14354	Tweak spacing in utf8_mapper.h	2017-10-06 15:11:27 -05:00
Scott Lahteine	5e63ba970d	Merge pull request #7862 from thinkyhead/bf1_mapper_c2c3c4_sk [1.1.x] Added Slovak C2C3C4 mapper implementation.	2017-10-06 14:56:26 -05:00
Roman Moravčík	2a46ab288e	Added Slovak C2C3C4 mapper implementation.	2017-10-06 14:40:15 -05:00
Scott Lahteine	7999249a5c	Set TEMP_SENSOR_0 to 1 in CR-10 example config As pointed out in #7692 by @totalitarian	2017-10-06 14:29:00 -05:00
Scott Lahteine	0ec9a7f090	Fix xon_xoff_state initialization	2017-10-04 12:10:15 -05:00
Scott Lahteine	a47c5c093d	Merge pull request #7459 from ejtagle/xon-xoff-sdxfer [1.1.x] XON/XOFF serial handshake (for faster transfers to SD)	2017-10-02 23:52:41 -05:00
Scott Lahteine	bcb8722513	Fix DUAL_X_CARRIAGE manual move Addressing #7745	2017-10-02 23:28:52 -05:00
Scott Lahteine	4c34b3ad9c	Stop redundant E4_IS_TMC2130 current control	2017-10-02 23:10:34 -05:00
Scott Lahteine	1b8b5c4b06	Make prepare_move_to_destination_dualx a full move function	2017-10-02 23:10:18 -05:00
Scott Lahteine	4e19ff75b6	XON/XOFF corrections, tweaks, formatting, etc.	2017-10-02 03:52:42 -05:00
Scott Lahteine	94caabf89a	Add XON/XOFF options to example configs	2017-10-02 03:52:41 -05:00
Scott Lahteine	f365448338	Merge pull request #7811 from thinkyhead/bf1_fix_resume_print [1.1.x] Fix broken M600 resume_print	2017-10-01 22:54:34 -05:00
GMagician	8ab426c3a4	Updated all examples configurations Forgot to update examples configurations. Done now	2017-10-01 21:04:12 -05:00
GMagician	33d28c24bf	Implementing [FR] #7548 Added new configuration to inhibit XYZ movements when home is not done	2017-10-01 21:02:42 -05:00
Scott Lahteine	ac70048945	Only MarlinConfig.h ahead of feature block	2017-10-01 20:55:14 -05:00
MasterPIC	40a4a716e1	Fix filament change bug in resume_print Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion. Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position. So the extrusion step is mixed with the movement required to go back to the printing position. The provided code seems to be working but probably a better fix is required.	2017-10-01 18:42:29 -05:00
Scott Lahteine	802f147686	Remove some excess whitepsace	2017-10-01 18:25:04 -05:00
Scott Lahteine	80a0f935a1	Fix G10-G11 by adding a synchronize Based on #7792 by @tcm0116	2017-09-30 17:46:31 -05:00
MasterPIC	7f8ff0a724	Show leveling status on character LCD	2017-09-27 12:18:41 -05:00
Scott Lahteine	723a34d9c7	Add confirmation to Init EEPROM command	2017-09-27 11:27:47 -05:00
Scott Lahteine	2efd5b119d	Add USER_SCRIPT_RETURN option	2017-09-27 11:23:34 -05:00
Scott Lahteine	b105e47cb5	Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled Based on #7769	2017-09-27 10:39:44 -05:00
DecoyPlatypus	41dcbe89dd	Fixed ST7920_DELAY typo Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3	2017-09-27 03:01:09 -05:00
DecoyPlatypus	70a64355f6	Fixed LCD_FOR_MELZI SanityCheck Sanity Check for LCD_FOR_MELZI would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.	2017-09-27 03:01:09 -05:00
Scott Lahteine	e37a1ded0d	Increase BABYSTEP_MULTIPLICATOR to 100 Ideally, it should be calculated based on Z steps per unit so that each babystep corresponds to around 0.025mm. Smaller than this is largely insignificant for typical layer heights.	2017-09-27 00:14:26 -05:00
Scott Lahteine	3e28243076	No need for LCD_PINS_Dn when unused	2017-09-27 00:12:20 -05:00
Scott Lahteine	bbb94b8f68	babystepping tweak	2017-09-27 00:12:20 -05:00
Scott Lahteine	a277b43e30	Fix babystep menu display	2017-09-27 00:12:20 -05:00
Scott Lahteine	8a994fb1b1	Fix encoder pulses for G3D_PANEL	2017-09-27 00:12:20 -05:00
Scott Lahteine	ac2ac99e15	Fix bad logic in autostart As pointed out by @marcio-ao in #7638	2017-09-24 17:52:35 -05:00
Scott Lahteine	c1cc79176c	Full-featured Creality configs	2017-09-24 16:52:42 -05:00
Scott Lahteine	f25dccd6d1	Disable BABYSTEP_XY by default in all configs	2017-09-24 16:52:42 -05:00
Scott Lahteine	cd09a83cfa	Add size note to SDSORT_LIMIT	2017-09-24 16:52:41 -05:00
Scott Lahteine	9bbc2df217	General code cleanup, spacing	2017-09-24 16:52:41 -05:00
Luc Van Daele	74d430cb97	matrix names update (#7697 ) * matrix names update * symplified names * new angle normalization * ABC * axis * least squares * recalc_delta_settings * endstop_adj * 0p * bug	2017-09-24 01:45:31 -05:00
Scott Lahteine	9d4d53e2fd	Update links to old wiki page	2017-09-23 22:06:45 -05:00
Scott Lahteine	00896f1713	Fix LEVEL_BED_CORNERS (No leveling required)	2017-09-23 22:00:45 -05:00
Scott Lahteine	c3a9e95a5f	Define drawmenu items once, in ultralcd.cpp	2017-09-23 22:00:45 -05:00
Scott Lahteine	0afd25a010	Fix caselight compile issues	2017-09-23 22:00:44 -05:00
GMagician	5b87843fae	Addressing #7612 Replaced extruder with hotend	2017-09-07 19:07:36 +02:00
Scott Lahteine	386b74f8c2	Merge pull request #7593 from marcio-ao/bugfix-1.1.x Added option for graphical overlay for Z-offset (Resubmission of #7350 and #7586)	2017-09-02 00:01:38 -05:00
Tannoo	2a963fb5d1	UBL LCD Bugfixes (#7598 )	2017-09-01 16:59:06 -05:00
Marcio Teixeira	d69c5317df	Added option for graphical overlay for Z-offset	2017-08-31 14:21:39 -06:00
Scott Lahteine	367e1b54ba	Merge pull request #7591 from thinkyhead/bf1_misc_patches M111: no args reports current flags	2017-08-31 15:19:29 -05:00
Scott Lahteine	8a184a526a	Marlin: Patch G33, allow M111 to give status	2017-08-31 14:35:00 -05:00
Scott Lahteine	353c23b16e	Enforce BED_CENTER_AT_0_0 on Delta, SCARA	2017-08-31 14:34:59 -05:00
Scott Lahteine	898f48e331	CNC workspace planes for G5 According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.	2017-08-31 14:29:29 -05:00
Scott Lahteine	5851c2d36f	MAX7219 followup (#7564 ) * Add MAX7219_DEBUG to Travis CI testing * Tweak config and use standard pin naming for MAX7219_DEBUG * MAX7219: Apply coding standards, use macros, etc. * Make code work...	2017-08-31 11:44:43 -05:00
Scott Lahteine	52073f21c5	Merge pull request #7556 from thinkyhead/bf1_slovak_language Slovak UTF-8 translation	2017-08-27 21:05:53 -05:00
Scott Lahteine	321f98f867	Fix servo delay in Folgertech config	2017-08-27 20:53:27 -05:00
jneilliii	36771e9492	Fixes required for Creality CR-10	2017-08-27 20:39:16 -05:00
Roxy-3D	3f0b38ed5d	Add Max7219 LED Matrix Debug Support (#7563 ) * Add Max7219 LED Matrix Debug Support The Max7219 8x8 LED Matrix's are very helpful for debugging new code. And for that matter, just trying to maximize printer settings without causing stuttering. The displays are very inexpensive (under $2.00 with shipping) and provide a lot of help when trying to debug complicated code. * Try to keep Makefile up to date.	2017-08-25 17:03:07 -05:00
GMagician	0067bb2840	Addressing #7552 When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged. This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.	2017-08-25 03:23:16 -05:00
Scott Lahteine	2b12093589	Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben New feature: Part-Cooling Fan Multiplexer	2017-08-25 03:16:40 -05:00
Michal Holes	54d48130f3	Slovak UTF-8 translation Slovak UTF-8 translation	2017-08-23 19:14:35 -05:00
Scott Lahteine	86c024ce98	Organize, document pins.h include lines	2017-08-23 18:33:00 -05:00
Scott Lahteine	c7b07d20f2	Minor patches to pins files	2017-08-23 18:32:59 -05:00
Scott Lahteine	356af7dcb0	Tweak Sanguinololu-related pins files	2017-08-23 18:32:59 -05:00
Scott Lahteine	11a724d8fc	Sanguinololu example configuration	2017-08-23 18:32:59 -05:00
Scott Lahteine	e337df2e98	Miscellaneous tweaks to serial outputs, code cleanups	2017-08-23 18:32:58 -05:00
Vben	c0409b85e7	New feature: Part-Cooling Fan Multiplexer	2017-08-18 15:59:04 -05:00
Scott Lahteine	e82e9073d6	Merge pull request #7530 from GMagician/Code-reduction Code reduction with some configurations	2017-08-18 13:57:59 -05:00
GMagician	6127154af3	Fix identation by tab There was a tab instead of spaces	2017-08-18 11:34:55 +02:00
GMagician	b94a1c6b9f	Code reduction this some configurations When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call	2017-08-18 11:11:00 +02:00
GMagician	405a2132f3	#7529 compile fix I made an error in previous fix	2017-08-17 22:04:28 +02:00
GMagician	869d7f3703	#7504 missing part #7504 integration has missed this part. When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it. In my original fix I completely removed this part but maybe this is a better compromise	2017-08-17 21:43:47 +02:00
Scott Lahteine	101ba70517	Merge pull request #7505 from thinkyhead/bf1_anet_1_pio Add Anet 1.0 to Platformio.ini	2017-08-17 00:33:20 -05:00
Vben	4817b39d98	Added new feature for AutoParking Extruder (APE)	2017-08-16 17:33:11 -05:00
Scott Lahteine	6772e33ef6	Use [XY]_CENTER for error correction Followup to #7512	2017-08-16 16:13:09 -05:00
Scott Lahteine	385f1bb9e5	Merge pull request #7504 from thinkyhead/bf1_servo_delays Individual servo delays	2017-08-16 16:05:22 -05:00
Scott Lahteine	2a31c9f2ce	Merge pull request #7515 from cdedwards/bugfix-1.1.x Fix for G26 spam output	2017-08-16 16:01:10 -05:00
MTrab	5fa61c0ad3	Add Anet 1.0 to Platformio.ini Added env:anet10 to platformio.ini for easy compile and upload to this board	2017-08-16 15:59:20 -05:00
Scott Lahteine	b3f59ec945	Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16 Add "Level Corners" menu item	2017-08-16 15:58:15 -05:00
Tannoo	b33739d493	UBL_Language_Update (#7520 ) * UBL_Language_Update Translatable strings * Use slightly better wording... * Use slightly better wording...	2017-08-16 09:49:04 -05:00
Scott Lahteine	a1878cd1c0	Add "Level Corners" menu option	2017-08-16 02:54:33 -05:00
Scott Lahteine	0a18fb735e	Use "PSU" label to fit on screen	2017-08-16 02:51:00 -05:00
Scott Lahteine	30887feae3	Tweak some formatting in ABL G29	2017-08-16 02:51:00 -05:00
Thomas Moore	257b693ab0	Advanced pause fixes (#7518 ) * Disallow filament change while paused * Use kinematic movemements in pause_print and resume_print	2017-08-15 22:57:13 -05:00
Tannoo	ab2ac1af71	UBL_LCD_storage_corrections (#7517 ) Correcting the storage selection. Also EEPROM error handling on the LCD.	2017-08-15 21:01:11 -05:00
cdedwards	f1843211e6	Fix for G26 spam output while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.	2017-08-15 17:04:53 -06:00
Roxy-3D	be5ca34215	Allow G29 to work correctly even if nozzle is off the mesh. (#7512 ) * work around previous regressions...	2017-08-15 17:04:52 -05:00
Scott Lahteine	06541ec885	Merge pull request #7448 from thinkyhead/bf1_delta_fixes Prevent damage if DELTA_HEIGHT is set badly	2017-08-15 16:35:09 -05:00
GMagician	e9c72978c7	Implement SERVO_DELAY as array This modify give SERVO_DELAY x servo basis	2017-08-15 00:28:47 -05:00
Scott Lahteine	96ae53cf41	Use MOVE_SERVO macro where possible	2017-08-15 00:28:39 -05:00
Scott Lahteine	3be9c19f12	Hold on move axis screens	2017-08-14 22:51:47 -05:00
Scott Lahteine	8fd58cd6dc	Patch goto labels for consistency	2017-08-14 22:51:47 -05:00
Scott Lahteine	75e6f72c89	Fix hexadecimal number formatting	2017-08-14 22:50:44 -05:00
Scott Lahteine	ac76101ec3	Eliminate goto in gcode_M48	2017-08-11 17:00:40 -05:00
Scott Lahteine	75e6ead5fd	Eliminate goto in gcode_G33	2017-08-11 17:00:40 -05:00
Scott Lahteine	6bd63d27b5	Updates to G29 for probe error handling	2017-08-11 17:00:40 -05:00
Thomas Moore	f54e0fc90f	Prevent damage if DELTA_HEIGHT is incorrect	2017-08-11 16:09:14 -05:00

... 12 13 14 15 16 ...

8240 Commits