MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,874 Commits 1 Branch 0 Tags 96 MiB
ac293bdf95
Commit Graph

8202 Commits

Author SHA1 Message Date
Scott Lahteine
c67cefd913 2.0.x parity in ultralcd__impl_HD44780.h 2018-02-17 15:41:20 -06:00
Scott Lahteine
c71f542d61 LCD_PROGRESS_BAR w/out SDSUPPORT for character LCD 2018-02-17 15:41:20 -06:00
Scott Lahteine
fe5ba25a00 Fix #9681 2018-02-17 15:39:46 -06:00
Scott Lahteine
4ae9afcc56 Fix compile error with SHOW_BOOTSCREEN disabled 
Fix #9530
Fix #9524
 2018-02-17 15:39:46 -06:00
Scott Lahteine
c3ff130127
Merge pull request #9672 from thinkyhead/bf1_czech_mate 
[1.1.x] Update Czech language
 2018-02-16 22:47:47 -06:00
Scott Lahteine
fbf8819253 Make safe_delay available for neopixel startup test 
Fix #9033
 2018-02-16 22:25:57 -06:00
Scott Lahteine
a7ebbe6dcd Update Czech advanced pause 2018-02-16 22:22:12 -06:00
Scott Lahteine
ada40af5d6 Move <avr/pgmspace.h> include to MarlinConfig.h 
For parity with 2.0.x, which includes pgmspace.h in the HAL.
 2018-02-16 18:40:39 -06:00
Scott Lahteine
ba4a17f251 Tweak serial.h 2018-02-16 17:54:07 -06:00
Scott Lahteine
12628d43ce Use serial macros where possible 2018-02-16 17:53:47 -06:00
Scott Lahteine
023d21a1cf Add SERIAL_FLUSH and SERIAL_FLUSHTX macros 2018-02-16 17:50:58 -06:00
Scott Lahteine
a8a64f19f4 serial_echopair_P => serial_echopair_PGM 2018-02-16 17:35:26 -06:00
Rob Griffiths
529e6ed1ea added TronXY XY100 config 2018-02-16 13:57:01 +00:00
Thomas Moore
acb4dba7cd Fix LCD manual movement on kinematic machines (#9656) 2018-02-16 02:30:05 -06:00
Bob-the-Kuhn
f508bdded4 Fix VIKI2 hardware SPI compatibility (#9642) 2018-02-16 02:28:42 -06:00
teemuatlut
20f8c9b950 TMC SGT is int8 (#9650) 2018-02-16 02:19:17 -06:00
Scott Lahteine
d7e2e655ca Followup to #9663 2018-02-16 02:14:20 -06:00
Bob-the-Kuhn
15204bd5e9 Fix compile issue with USE_CONTROLLER_FAN (#9665) 2018-02-16 02:02:20 -06:00
Scott Lahteine
2ec90d2162 Followup to #9663 
`ENABLED` only works for flag type options. Floats must use `#ifdef`.
 2018-02-15 22:23:27 -06:00
Scott Lahteine
b56c6b9e13
Patch G26 circles (#9626) 
Easier to configure. Catch an odd divisor.
 2018-02-15 22:11:06 -06:00
Bob-the-Kuhn
1647db8fad Set CONTROLLER_FAN_PIN example to -1 2018-02-15 21:29:09 -06:00
Roxy-3D
c8d3069580
UBL - Allow user to control Z-Height correction for off mesh movements (#9663) 
* UBL - Allow user to control Z-Height correction for off mesh movements

* Enable UBL_Z_RAISE_WHEN_OFF_MESH on test machine for time being
 2018-02-15 19:23:01 -06:00
Roxy-3D
b7e245036b
Fix a comment about M105 buffer over runs... 2018-02-14 17:49:50 -06:00
Roxy-3D
66370006bb
Fix G26 Circles... (#9638) 
Will get this duplicated in bugfix_2.0.0 tomorrow...
 2018-02-14 17:31:25 -06:00
Roxy-3D
3fcd131f46
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES 
There is significant downside to breaking up the long line segments on UBL Cartesian machines via the SEGMENT_LEVELED_MOVES mechanism.   It adds a lot of extra computation but worse...  It cuts out all of UBL's off mesh Z-Height correction checks.    There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately.   They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
 2018-02-14 14:19:52 -06:00
Scott Lahteine
0e7999915d Fix #9361 2018-02-14 07:47:39 -06:00
AnHardt
e301e28e45 Complete M48 description_1 (#9630) 2018-02-14 05:17:48 -06:00
Scott Lahteine
6e4a7e2dcb Init lcd message string programmatically 2018-02-14 05:08:06 -06:00
studiodyne
8fbba6abd9 [1.1.x] French update (#9610) 2018-02-14 04:17:54 -06:00
Scott Lahteine
e2fef4df6f Fix #9201 
FILAMENT_LCD_DISPLAY and SDSUPPORT are a-ok together.
 2018-02-14 03:28:05 -06:00
Scott Lahteine
c93dab2307 MYSERIAL => MYSERIAL0 
For cleaner diffing with Marlin 2.0.x.
 2018-02-14 02:56:56 -06:00
Scott Lahteine
d89a61bd51 Update DIGIPOT_I2C_MOTOR_CURRENTS comments 2018-02-13 22:56:03 -06:00
studiodyne
2683b2636b Update French language (#9590) 2018-02-12 01:08:33 -06:00
Scott Lahteine
7cb3640ea4 Restore welcome message 2018-02-12 01:01:09 -06:00
Scott Lahteine
dc85b604bb
Merge pull request #9591 from teemuatlut/bf1_fix_M914 
[1.1.x] Fix M914 macro
 2018-02-11 08:21:24 -06:00
Scott Lahteine
7e17a2cfd0 26-day-old buried patch to U.B.L. 2018-02-11 06:06:50 -06:00
Scott Lahteine
0acaaf536d Update gMax1.5+ for 2.0.x parity 2018-02-11 05:20:57 -06:00
Scott Lahteine
30b08e218d Patch Max7219 for parity with 2.0.x 2018-02-11 05:19:36 -06:00
teemuatlut
7babfbbcb2 Fix M914 macro 2018-02-11 13:08:55 +02:00
Scott Lahteine
2e7a754ac1 Megatronics baud rate 115200 
Fix #9092
 2018-02-11 03:42:27 -06:00
Scott Lahteine
61f3051982 Fix plan_arc clockwise (G2) 
Fix #9482
 2018-02-11 03:32:18 -06:00
Scott Lahteine
73419681dc Update PB Rev.F pins 2018-02-11 01:36:20 -06:00
Scott Lahteine
bb155ed38e Correct MOTHERBOARD for Geeetech i3 Pro X 
Fix #8856
 2018-02-10 20:27:11 -06:00
Scott Lahteine
7aad82cccd Fix auto_fan in pins.h 2018-02-10 20:02:17 -06:00
Scott Lahteine
18aa682954 Patch SILVER_GATE auto fan 2018-02-10 19:29:36 -06:00
Scott Lahteine
5e72729c67 Fix #8744 2018-02-10 16:51:55 -06:00
Scott Lahteine
f6a73bbd84 Patch Power class 2018-02-10 15:36:42 -06:00
Scott Lahteine
baaf79b755 Use signed for pin_t 2018-02-10 15:30:29 -06:00
Douglas Hammond
1e00ba5433 Add Tronxy X5S 2018-02-10 15:03:20 -06:00
Scott Lahteine
abda89437d Melzi boards include melzi pins 2018-02-10 15:03:20 -06:00
Scott Lahteine
d6d01f1f8e
Merge pull request #9571 from thinkyhead/bf1_french_update 
Update French language
 2018-02-10 14:15:13 -06:00
GMagician
5a39afb81b [1.1.x] Memory overflow protection (#9563) 2018-02-10 14:14:22 -06:00
Scott Lahteine
017e0e6951 Update French language 
Based on #9556 by @gege2b
 2018-02-10 14:06:02 -06:00
teemuatlut
7ee87dc2db Init CS pins before loading settings 2018-02-10 19:16:08 +02:00
Scott Lahteine
5a53e4d921
Merge pull request #9548 from thinkyhead/bf1_prevent_comments_resetting 
[1.1.0] Prevent watchdog reset due to many comments
 2018-02-09 07:15:10 -06:00
Scott Lahteine
8979990805
Merge pull request #9543 from thinkyhead/bf1_reliable_probe_heaters_off 
[1.1.x] More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
 2018-02-09 07:10:33 -06:00
Matteo Ragni
4e276c6e00 [1.1.x] Support for the Anycubic Trigorilla Board (1.3 at least) (#8367) 2018-02-09 05:38:21 -06:00
Scott Lahteine
96bcf08477 Tweak escape handling in serial input 2018-02-09 04:06:44 -06:00
Scott Lahteine
68cc5c72fd No EXTRUDER_RUNOUT_PREVENT during print 2018-02-09 03:36:42 -06:00
Scott Lahteine
06dff0b7ec Fix HAS_CONTROLLER_FAN in is_power_needed 2018-02-09 03:33:45 -06:00
Scott Lahteine
c4dbedd5b6 Prevent watchdog reset due to many comments 
Addressing #7449
 2018-02-09 01:50:42 -06:00
Scott Lahteine
9727e5e3d6 Minor comment/condition cleanup 2018-02-09 00:53:04 -06:00
Scott Lahteine
ad323d852e
Sanity check for SERIAL_PORT 
Addressing #7400
 2018-02-09 00:41:39 -06:00
Scott Lahteine
4300547c66
Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
Scott Lahteine
f61ff9c813 Firmware retraction lost change 2018-02-08 22:20:31 -06:00
Scott Lahteine
55071749b7 Minor changes for 2.0.x parity 2018-02-08 22:20:31 -06:00
Scott Lahteine
9dd8a49f82 Add pin_t to Marln 1.1 branch 2018-02-08 21:01:41 -06:00
Scott Lahteine
36ba754842 More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING 2018-02-08 21:01:41 -06:00
Scott Lahteine
3e838bf6b6 Cyclops has SINGLENOZZLE and higher temp 2018-02-08 19:07:43 -06:00
Scott Lahteine
b81980a439 TouchX base config differences 2018-02-08 19:07:43 -06:00
Rajesh Vaidheeswarran
98e7b821b4 Add Cyclops configuration for BIBO 2018-02-08 18:24:40 -06:00
GMagician
03f27a5e41 [1.1.x] Fix compile warning (#9540) 2018-02-08 17:59:24 -06:00
Scott Lahteine
cffbb146ea
Correct some retract() comments 2018-02-08 17:56:53 -06:00
Scott Lahteine
1ddbdd0321 Not yet, HAS_DISPLAY 2018-02-08 04:03:05 -06:00
Scott Lahteine
4f04f4e6b8 Followup to #9532 2018-02-08 03:39:20 -06:00
Scott Lahteine
c1a3ec1228
Tweaky followup to I2CPEM update 2018-02-08 03:21:46 -06:00
Scott Lahteine
bdbd15e6d9
Merge pull request #9504 from jaysonkelly/patch-1 
[1.1.x] I2C Position Encoders update
 2018-02-08 02:57:45 -06:00
Scott Lahteine
5c2cb60f03
Merge pull request #9518 from melvinisken/bugfix-1.1.x 
[1.1.x] Changed software serial pins to enable R/W access to TMC2208 drivers
 2018-02-08 02:56:58 -06:00
jaysonkelly
f8a8711075 I2C position encoders update 
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
 2018-02-08 02:46:12 -06:00
Scott Lahteine
b509567567
Merge pull request #9514 from FreeJaus/bugfix-1.1.x-eu 
update eu language
 2018-02-08 02:10:58 -06:00
Scott Lahteine
2c6c9e90df
Merge pull request #9508 from tnw513/fix-italian 
Fix italian translation
 2018-02-08 02:10:46 -06:00
Scott Lahteine
8438a57910 Followup to #9532 2018-02-08 02:05:18 -06:00
Thomas Moore
a471cd26e1 [1.1.x] Enable Z axis and delta sensorless homing (#9532) 2018-02-08 02:02:48 -06:00
Scott Lahteine
f3a09768e8 Tweak early handling of M108/M112/M410 2018-02-07 22:43:51 -06:00
Scott Lahteine
9509568b7e Patch utility for debug-leveling 2018-02-07 22:43:51 -06:00
Scott Lahteine
252ae1b52d Drop ubl.h include from steppers.cpp 2018-02-07 22:16:07 -06:00
Scott Lahteine
3137df9ad4 Special override of LCD_WIDTH 2018-02-07 22:16:07 -06:00
Scott Lahteine
42866db251 Fix compile with BLUETOOTH 
Addressing #7110
 2018-02-07 18:06:26 -06:00
Melvin Isken
0c6c96bb60 Changed software serial pins to enable R/W access to TMC2208 drivers 2018-02-07 09:52:49 +01:00
Scott Lahteine
3621f21fb2 Clean trailing space 2018-02-07 02:40:41 -06:00
1138-4EB
3d346f8398 update eu language 2018-02-07 01:12:37 +01:00
tnw513
41785a10dd Fix italian translation 2018-02-06 15:09:06 +01:00
Scott Lahteine
c4f1a191c3 Marlin.ino needs no content 2018-02-06 01:09:51 -06:00
Scott Lahteine
967bf41080 Add a proper comment for G26 2018-02-06 00:59:54 -06:00
Christopher Reimer
254417e8b0 Enable and disable power supply automatically 2018-02-06 00:20:33 -06:00
Scott Lahteine
80946a17ee Add AUTO_POWER_CONTROL to example configs 2018-02-06 00:20:26 -06:00
1138-4EB
b86dfd35ae Configs for Prusa i3 Pro B GT2560 Rev.A Plus 
One without probe and one with BLTOUCH.
 2018-02-05 23:54:19 -06:00
Scott Lahteine
527d260581 Add ULTI_CONTROLLER to example configs 2018-02-05 22:24:08 -06:00
Project-J²
ae2476dfdb Add UltiController v2.1 support 
Add compatibility with the original screen bord from Ultimaker 2 printer
(UltiController v2.1 with the PG-2864ALBP I2C display)
 2018-02-05 22:24:08 -06:00
Scott Lahteine
91eaa54ea9 M100 comment 2018-02-05 21:53:21 -06:00
Scott Lahteine
1352acdf75 Adjustment to DOG_CHAR_*_EDIT 2018-02-05 20:24:18 -06:00
Scott Lahteine
123c6c5d34
Num-to-string functions for DEBUG_LEVELING_FEATURE 
Fix #9429
 2018-02-05 19:05:07 -06:00
Scott Lahteine
df320209c3 Patch hex_print_routines.* include order 2018-02-05 17:05:26 -06:00
Scott Lahteine
8da92b6823
Fix default arg in lcd_goto_screen 2018-02-05 16:41:59 -06:00
Scott Lahteine
b708bcf8b1
sp 2018-02-05 15:56:58 -06:00
Scott Lahteine
7b3e28fc77
Merge pull request #9489 from GMagician/1.1.x-Simplify-bltouch-configuration 
[1.1.x] Simplify bltouch configuration
 2018-02-05 14:37:34 -06:00
Scott Lahteine
873fb84d27
Fix const mesh_index_pair in G26 
Followup to #9493
 2018-02-05 14:29:47 -06:00
GMagician
587e6b7c8d [1.1.x] Fix compiler error when G26 is enabled 
Address #9491
 2018-02-05 21:21:42 +01:00
GMagician
f1958ac060 [1.1.x] Simplify bltouch configuration 
When using bltouch Z_MIN_ENDSTOP_INVERTING must match Z_MIN_PROBE_ENDSTOP_INVERTING

since both are redefined latter is just redefined equal to first
 2018-02-05 19:52:41 +01:00
Scott Lahteine
0f6f05441b Implement MALYAN_LCD 2018-02-04 21:18:49 -06:00
Scott Lahteine
ca58084020 Add MALYAN_LCD to configurations 2018-02-04 21:18:42 -06:00
Scott Lahteine
89a9aa931f SanityCheck.h parity with 2.0.x 2018-02-04 21:17:03 -06:00
Scott Lahteine
e9d374dd54 Tweak sanity-check for SENSORLESS_HOMING 2018-02-04 21:17:03 -06:00
Scott Lahteine
21bfbb9d44 Apply standards for whole-file conditions 2018-02-04 21:17:03 -06:00
Scott Lahteine
5054c53901 Export more in ultralcd.h 
Closer parity with 2.0.x
 2018-02-04 21:17:03 -06:00
Scott Lahteine
56d5c5b97a Misc. comments 2018-02-04 21:16:07 -06:00
Scott Lahteine
ad70d76faa
Merge pull request #9332 from paierh/bugfix-1.1.x-UBL-pattern 
[1.1.x] Change angles for circles in G26-validation-pattern
 2018-02-04 19:05:32 -06:00
Michael Neumann
499248c5ef Allow override of RAMPS CS Pins 2018-02-04 06:10:42 -06:00
shaktee
6e86c9d22b Add BIBO configs to Marlin bugfix-1.1.x (#9467) 
[1.1.x] BIBO TouchX configuration
 2018-02-03 23:20:35 -06:00
Scott Lahteine
d00eb4da5c Language updates for parity 2018-02-03 22:48:06 -06:00
Thomas Moore
5b4e39a429 Apply feedrate to nozzle movement for kinematic machines 2018-02-03 22:17:13 -06:00
Scott Lahteine
3bdd7b1ed3 Reduce trig table down to 6 floats 2018-02-03 19:16:42 -06:00
GMagician
14b7c8cf51 [1.1.x] Fix temperature out of LCD 
Fix bug introduced in #9381

Original code was 18-chars*6 hence reversed number in if statements
 2018-02-03 22:58:26 +01:00
paierh
68cff5f245 Change G26 circle angles 
Changed the start- and end-angles for circles in the mesh-validation-pattern to avoid crossing lines.

At the start-/end-point of the circles there is a small dot of filament on my printer.
When drawing lines after the circles the nozzle crashes into those dots and destroys the circles.
I solved this problem by rotating the start- and end-points by 45 degrees.
 2018-02-02 05:24:31 -06:00
Manuel Valentino
652162777b [1.1.x] Fixed wrong information about TMC2208 wiring (#9334) 2018-02-02 04:14:43 -06:00
teemuatlut
923f17328f Add TMC software SPI (#9362) 2018-02-02 03:56:08 -06:00
Custom3DProducts
f4076fe99d [1.1.x] Add Z_PROBE_HYSTERESIS to mitigate Z jerking while probing (#9375) 2018-02-02 02:29:19 -06:00
Scott Lahteine
6445859270
Merge pull request #9373 from nikkoura/fix_fr_strings 
[1.1.x] Fix french language (typos, case homogeneity)
 2018-02-02 01:54:12 -06:00
GMagician
4661451d32 [1.1.x] Fix compile error on delta when NO_WORKSPACE_OFFSETS (#9387) 2018-02-02 01:43:53 -06:00
Scott Lahteine
8bccd0ef5b Fix up _Bootscreen.h and _Statusscreen.h 
- Support for 3 and 4-frame fan animation
- Binary bitmap data for easier visualization
- Cleanup mystery numbers, etc.
 2018-02-02 00:55:02 -06:00
Scott Lahteine
f4639fa964 Move SET_BIT macro to endstops.cpp and simplify 2018-02-02 00:50:29 -06:00
Scott Lahteine
0a10d010b7
Merge pull request #9390 from tcm0116/1.1.x-retract 
[1.1.x] Clear retracted status when homing the Z axis
 2018-02-01 23:36:53 -06:00
Scott Lahteine
7a056a4e09 Patch resume_print based on suggestion 
See #9392
 2018-02-01 23:34:14 -06:00
Scott Lahteine
33c459c1d6 Parser followup patch 
Based on #9393
 2018-02-01 23:25:22 -06:00
Scott Lahteine
65c2f3bb65
Merge pull request #9435 from thinkyhead/cleanup_binary_deleteme 
[1.1.x] Separate 32-bit wide bit macros
 2018-02-01 22:44:18 -06:00
Scott Lahteine
31920a5285 Add / use 32-bit wide bit macros 2018-02-01 21:47:23 -06:00
Scott Lahteine
b78cccad0f Fix broken G29 W I J 2018-02-01 19:50:18 -06:00
Thomas Moore
36a1d12238 Clear retracted status when homing the Z axis 2018-01-29 19:35:16 +00:00
Nikkoura
79183f7620 Fix french language (typos, case homogeneity) 2018-01-28 00:01:00 +01:00
GMagician
b0f148f7db [1.1.x] Fix SD wrong filename list (#9343) 
If last file in directory has short filename and is preceded by a deleted long file name. SD menu will wrongly report long deleted file name as last entry
 2018-01-24 23:07:58 -06:00
Scott Lahteine
bc4fa3984b Prettier codebits debugging 2018-01-24 00:30:58 -06:00
Scott Lahteine
d60e5c89d8
Merge pull request #9326 from thinkyhead/bf1_fix_parser_M118 
[1.1.x] Fix parser.has_value, M118 parameters
 2018-01-24 00:23:50 -06:00
Stefan May
908d487212 removed execution mode from files 2018-01-24 00:17:34 -06:00
Scott Lahteine
a855d01336 Fix M118 parameter parsing 2018-01-23 23:50:42 -06:00
Scott Lahteine
d5ad51821c Simplify G-code debug option 2018-01-23 23:50:42 -06:00
Scott Lahteine
59b5800e58 Change parser codebits from array to int32_t 2018-01-23 23:50:42 -06:00
Scott Lahteine
1b84807eb0 Fix has_value with FASTER_GCODE_PARSER 2018-01-23 23:50:42 -06:00
Scott Lahteine
3ab4736ac9 Move some strings to PROGMEM 2018-01-23 23:50:42 -06:00
Scott Lahteine
d8aa40eedf Marlin must override _BV for 32-bit masks! 2018-01-23 23:50:42 -06:00
Scott Lahteine
2177c246d5 Patch BQ Hephestos 2 filament diameter 
From #9314
 2018-01-23 20:38:43 -06:00
Scott Lahteine
f447668387 Optimize some serial strings 2018-01-23 18:59:35 -06:00
Scott Lahteine
d4ab383a1b Lightly optimize arc length calculation 2018-01-23 18:59:35 -06:00
Scott Lahteine
87c254b238
Patch M114 D logical output 2018-01-23 18:48:53 -06:00
Scott Lahteine
df5c06ab7b Fix G29 no_action with A and Q 2018-01-23 13:58:36 -06:00
Scott Lahteine
b2dcb75c6c Include Z Fade in log_machine_info 2018-01-23 13:58:36 -06:00
Scott Lahteine
074f191bc3 Followup patch for TMC stepper init 2018-01-23 13:58:36 -06:00
Manuel Valentino
2bda584fc6 Added missing SoftwareSerial begin for TMC2208 2018-01-22 10:49:40 -06:00
Thomas Moore
b818543045 [1.1.x] Fix change filament for delta machines (#9296) 2018-01-22 10:19:00 -06:00
Scott Lahteine
1cea0b6f70 Fix Skew Correction pre-calculation overflow error 2018-01-22 08:22:28 -06:00
Scott Lahteine
5c6061ea5a More precision in M852 skew report 2018-01-22 08:06:40 -06:00
Scott Lahteine
6799aa9806
Merge pull request #9278 from oysteinkrog/fix/DualX_Endstops_1.1.x 
[1.1.x] Fix DUAL_X_CARRIAGE endstop tests
 2018-01-22 07:42:28 -06:00
Scott Lahteine
049898fa30 Update comment on set_home_offset 2018-01-22 06:14:55 -06:00
Scott Lahteine
feb6014e92 Don't run M600 on filament runout if the nozzle is cold 2018-01-22 05:46:29 -06:00
Scott Lahteine
c7ae531e35 Better LCD message when heating needed 2018-01-22 05:46:29 -06:00
Scott Lahteine
c373afbddd Clean up and document load/unload/pause/resume 2018-01-22 05:46:19 -06:00
Scott Lahteine
c970869d74 Add hotEnough methods 2018-01-22 05:46:19 -06:00
Scott Lahteine
e8687e5b9e Update pins.h for parity, protect MS pins 2018-01-22 02:19:04 -06:00
Scott Lahteine
198498b1aa Sanity check for TMC2130 having CS pins 2018-01-22 02:04:21 -06:00
cprund
0527090a31 Minor bugfix to the code that enables the 2nd X stepper. It needs to be enabled for X_DUAL_STEPPER_DRIVERS. (#9286) 2018-01-22 01:32:09 -06:00
Scott Lahteine
3d9f360b5a Better probe boundaries for linear/grid 2018-01-22 01:10:34 -06:00
Scott Lahteine
c8ac3a2a72 Add example configs for JGAurora A5 2018-01-21 22:23:31 -06:00
Scott Lahteine
957bb3124a Add thermistor 15 tuned for JGAurora A5 2018-01-21 16:57:47 -06:00
Øystein Krog
1f37781bf1 Fix DUAL_X_CARRIAGE endstops 
\#8170 fixed
(cherry picked from commit 441517bbe1625aa68a49aef0f98c6c4184e66dff)
 2018-01-21 16:32:29 +01:00
Scott Lahteine
7b62670987
Merge pull request #9272 from thinkyhead/bf1_creality_tuneup 
[1.1.x] Fix and improve Creality configs
 2018-01-21 02:53:08 -06:00
Scott Lahteine
7b5a4f71be
Fix toDigital length with days 
From #9220
 2018-01-21 02:50:54 -06:00
Scott Lahteine
94a9cd6477 CR-10S filament change length, enhanced status bitmap 2018-01-21 01:58:55 -06:00
Scott Lahteine
0cfcc7cbf5 Make "Ender" status screen dual-nozzle ready 2018-01-21 01:58:55 -06:00
Scott Lahteine
292755258a Add a heating indicator X offset 2018-01-21 01:58:40 -06:00
nhchiu
4a40cf268d Use NEOPIXEL as case light 
Add an option to use the NEOPIXEL LED as case light.
 2018-01-20 16:57:04 -06:00
Scott Lahteine
428fbe8228 Apply CASE_LIGHT_USE_NEOPIXEL to example configs 2018-01-20 16:27:30 -06:00
Scott Lahteine
81a12b2fac Relative movements fix 2018-01-20 15:22:38 -06:00
Scott Lahteine
fb636db61a Patch to restore broken Dual X Carriage 2018-01-20 15:07:40 -06:00
Scott Lahteine
369f1a64d8
Merge pull request #9262 from tcm0116/1.1.x-delta_softstops 
[1.1.x] Allow DELTA to compile with soft endstops disabled
 2018-01-20 14:16:14 -06:00
Scott Lahteine
6ed2840615
Use delay() in serial temp report 2018-01-20 14:12:30 -06:00
Scott Lahteine
eb3a05c437
Allow FIL_RUNOUT_PIN override on RAMPS-based boards 2018-01-20 12:00:03 -06:00
Scott Lahteine
d29a0d64d5
Set FIL_RUNOUT_PIN for Creality CR10-S 
Tested with M43 and found to be connected to DIO 2
 2018-01-20 11:58:37 -06:00
Scott Lahteine
09ad00b2d1
Use standard encoder pulses/steps for CR-10S 2018-01-20 11:34:53 -06:00
Thomas Moore
f8192f6e46 Allow DELTA to compile with soft endstops disabled 2018-01-20 09:43:59 -06:00
Scott Lahteine
f360b3b849
Date refresh 2018-01-20 09:17:00 -06:00
Scott Lahteine
74c23bf80d
Merge pull request #9232 from GMagician/1.1.x-ramps-pins-fixup 
[1.1.x] Expand RAMP case light possibilities
 2018-01-19 22:29:09 -06:00
Scott Lahteine
8d14ff1446
Merge pull request #9248 from GMagician/1.1.x-bed-temp-limit-fix 
[1.1.x] Standardized max temp values
 2018-01-19 22:27:00 -06:00
GMagician
2814103458 Standardized max temp values 
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
 2018-01-19 19:41:45 +01:00
Bob-the-Kuhn
d0e61d82c0 TMC2208 sanity check 2018-01-18 23:16:41 -06:00
Roxy-3D
0edf5a2ab5
Better handle serial over runs... 2018-01-18 16:51:27 -06:00
Roxy-3D
597d94bd3a
Better handle serial buffer over run 2018-01-18 16:48:12 -06:00
Roxy-3D
73565728c7
Further clean up for serial over run issue during long operations 2018-01-18 14:38:18 -06:00
GMagician
3b53c5ada1 Expand RAMP case light possibilities 
Pin 6 is only used by servos when 2 or more of them are used
 2018-01-18 18:35:08 +01:00
Roxy-3D
cbdbeb3e69
PronterFace M105 work around (#9227) 
PronterFace keeps sending M105 requests during long operations like G29 P1, G29 P2, G29 P4 and G26. The serial buffer fills up before the operation is complete. The problem is, a corrupted command gets executed. It is very typical for the M105 to turn into a M1 (actually... M1M105 is typical).

This causes the printer to say "Click to resume..."

This is a temporary fix until we figure out the correct way to resolve the issue.

More work needed for G26.
 2018-01-17 22:51:19 -06:00
Roxy-3D
80c1afde0f
Fix mesh size... 2018-01-17 09:33:18 -06:00
Roxy-3D
c11665e92f
Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 (#9213) 
The changes to ultralcd.cpp for is_lcd_clicked() did not encompass the
full functionality of UBL's G29 P1, P2 and P4.   It also broke G26's
ability to abort in several of its phases.

This is the first pass at fixing the problem.   It has been tested for
correctness for several hours but more testing  needs to be done.
There may be a few follow up patches to finish covering all the corner
cases, but right now I need to merge this before any conflicts show up.

Some of these changes will need to be moved over to the bugfix-v2.0.0
branch.   That will happen a few days from now.
 2018-01-17 00:27:50 -06:00
Scott Lahteine
333bd8f394
Merge pull request #9203 from benlye/m73-bugfix-1.1.x 
[1.1.x] Fix progress bar duration when time is exactly 86400s
 2018-01-16 21:14:31 -06:00
Bob-the-Kuhn
ba9aa47260
Revert "[1.1.x] Fix missing deceleration steps" 2018-01-16 11:31:27 -06:00
blye
deda3d3a3c Fix duration when time is exactly 86400s 2018-01-16 08:16:42 +00:00
Bob-the-Kuhn
ec028faa1b
Merge pull request #9174 from Sebastianv650/fix_missing_decel_steps 
[1.1.x] Fix missing deceleration steps
 2018-01-15 21:03:51 -06:00
Roxy-3D
06adef7343
Get FT-i3-2020 example files in compliance with ?_BED_SIZE 2018-01-15 15:32:19 -06:00
Scott Lahteine
69c993092b Followup to Ender config 2018-01-15 05:48:50 -06:00
Tommie Gannert
f3f26f7cb3 Creality Ender support. 
Reverse engineered from the unpublished firmware from Creality,
inferring the base version and configuration they used. The basis is
the firmware version from "Jul 31 2017 10:16:30". Configurations were
found by seeing what code was compiled into the firmware, and
constants used there.

They used Marlin 1.0.1, because

* 1.0.0 had very different serial output in `setup()` and overall
  code structure.
* 1.0.2 changed the `VERSION_STRING` to include a leading space,
  and `lcd_init` uses `SET_INPUT` instead of `pinMode`.

For U8Glib, a version between 1.14 and 1.17 was used, because

* 1.12 didn't have the extra speed argument to u8g_InitCom.
* 1.13 didn't have the soft reset instruction for UC1701 initialization.
* 1.18 has a new directory structure.

Quirks

* The value of PID_dT hints that F_CPU is 20M, but MarlinSerial.begin
  suggests it's indeed 16M (and the board uses 16M). Left at 16M for now.

* The LED and DOGLCD_CS are on the same pin.
 2018-01-15 03:39:43 -06:00
Scott Lahteine
a16ae30a61 More featureful CR-10S configuration 2018-01-15 01:02:23 -06:00
Scott Lahteine
175207659a
Merge pull request #9183 from thinkyhead/bf1_new_flsun_config 
[1.1.x] Add FLSUN Kossel configuration
 2018-01-15 00:49:25 -06:00
Scott Lahteine
5129eb1d43 More reliable temperature serial output? 2018-01-15 00:44:55 -06:00
Scott Lahteine
8f08e029d8 More up-front option to show SD percentage 2018-01-14 23:30:59 -06:00
Scott Lahteine
5c6c12dc3a Patch EEPROM for 32-bit 2018-01-14 23:18:45 -06:00
Scott Lahteine
734fa91e63 Misc config updates 2018-01-14 23:18:45 -06:00
Scott Lahteine
1d5eba4470 Add FLSUN Kossel configuration 2018-01-14 23:18:45 -06:00
Scott Lahteine
758d9db964 Link to marlinfw.org bitmap tool 2018-01-14 22:39:57 -06:00
Scott Lahteine
1d8b03964f
Merge pull request #9164 from GMagician/1.1.x-SD-issues-fix 
[1.1.x] sd issue fix
 2018-01-14 20:47:04 -06:00
Sebastianv650
4fa0937a55 Fix missing deceleration steps 
Marlin never reached final_speed after deceleration.
 2018-01-14 17:09:47 +01:00
GMagician
82dc89bfd2 Save some program memory 
This will save some program memory with no speed lose
 2018-01-13 09:46:54 +01:00
GrantM11235
a0bd811093 [1.1.x] Fix support for Malyan M150 (#9146) 
Implements changes to LCD and encoder pins from
forums.reprap.org/read.php?110,716538,728278 and also sets
ST7920_DELAY_[1-3] to DELAY_2_NOP to be compatible with the slower LCD
 2018-01-12 01:14:07 -06:00
Scott Lahteine
c1d6d24b9d Cleanup spacing, commentary 2018-01-11 18:52:54 -06:00
Sebastianv650
e2871f0dcd [1.1.x] Ensure smooth printer movements (#9149) 
- Never execute a block without an up-to-date trapezoid
- Start blocks with MINIMUM_PLANNER_SPEED, except when coming from a full stop
 2018-01-11 18:50:18 -06:00
Bob-the-Kuhn
4393c3ef7f LCD_CONTRAST to uint16_t for 1.1.x parity (#9148) 2018-01-11 18:32:41 -06:00
Scott Lahteine
e8b1bbac83 Creality CR-10S configurations 
Provided by printedsolid.com
 2018-01-11 01:03:34 -06:00
Scott Lahteine
885200f833 Bring other configs up-to-date 2018-01-11 01:03:34 -06:00
Scott Lahteine
3df0d62725 Updates to TMC support 2018-01-10 04:32:49 -06:00
Scott Lahteine
d1ce0bc071 M915 Z Axis Calibration 2018-01-09 18:55:08 -06:00
Scott Lahteine
9714c9aebe
Merge pull request #9128 from fiveangle/bf1-disable_serial_stats_on_usbcon 
[1.1.x] SERIAL_STATS_* features not supported on USBCON targets
 2018-01-09 18:42:26 -06:00
Dave Johnson
2fcef3e8e2 Enable USE_ZMIN_PLUG on SCARA example (#9125) 2018-01-09 18:41:02 -06:00
Dave Johnson
dd55c98139 SERIAL_STATS_* features not supported on USBCON targets 2018-01-09 16:27:57 -08:00
Scott Lahteine
bb5ba482bc More EEPROM field debugging 2018-01-09 18:10:33 -06:00
GMagician
5903b002ac 1.1.x semitec 104NT-4 added (#9120) 
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
 2018-01-09 16:53:44 -06:00
Anthony
1326eb4ef7
fix fwretract structure reference #9102 
Marlin_main.cpp: In function 'void resume_print(const float&, const float&, int8_t)':

Marlin_main.cpp:6646: error: 'retract_length' was not declared in this scope
         do_pause_e_move(-retract_length, fwretract.retract_feedrate_mm_s);
                          ^
 2018-01-08 18:48:19 -06:00
Scott Lahteine
0eee55c0dd Patch TMC current read from EEPROM 2018-01-07 20:49:43 -06:00
Scott Lahteine
f8dee4e726
Merge pull request #9088 from thinkyhead/bf1_mbl_localize 
[1.1.x] MBL cleanup, has_mesh() method
 2018-01-07 20:10:10 -06:00
Tannoo
2c3bdfe2ea [1.1.x] UBL Mesh Storage Message (#9094) 2018-01-07 20:07:20 -06:00
Scott Lahteine
ffeb4495fe Make mbl.has_mesh() a method 2018-01-07 18:14:37 -06:00
Scott Lahteine
be555e3578 Move MBL functions into the class 2018-01-07 18:14:37 -06:00
Scott Lahteine
eec97a5cf1 Don't wrap mbl.h in conditionals 2018-01-07 00:24:46 -06:00
Scott Lahteine
fa3709451b
Set mbl.has_mesh on manual point entry 
Based on #9086
 2018-01-06 23:32:00 -06:00
Scott Lahteine
eaa6257baf
Fix M503 skew output 
Followup to 1761cacaa1
 2018-01-06 20:53:33 -06:00
Someone Unknown
b5e98ac1b7 Set laser/spindle PWM to lowest speed on M5 2018-01-06 14:01:58 -06:00
GMagician
4cb35a285b Bmp fix 
Clockwise arrow fixed
 2018-01-06 19:08:37 +01:00
Bob-the-Kuhn
0b5b2a424c
Merge pull request #9067 from MarlinFirmware/SD-detect 
[bugfix-1.1.x] SD card detect fix
 2018-01-05 20:32:33 -06:00
Bob-the-Kuhn
0868907359 works 2018-01-05 19:12:34 -06:00
Scott Lahteine
670df2ea6d Settings FIELD_TEST fix 2018-01-05 19:12:22 -06:00
Scott Lahteine
fbda8a2e2b UBL G29 works without settings.load 2018-01-05 15:47:52 -06:00
Scott Lahteine
3d34dddbc0 Squish lcd_advanced_pause_show_message 2018-01-05 15:47:52 -06:00
Scott Lahteine
3b3b7e09ec Add FIELD_TEST to validate storage 2018-01-05 15:47:52 -06:00
Scott Lahteine
5d26f88bd5 Add data size validation 2018-01-05 15:47:52 -06:00
Scott Lahteine
51977c64ee Add a struct defining EEPROM storage 2018-01-05 15:47:51 -06:00
Scott Lahteine
42216f52ab Add MarlinSettings::validate() 2018-01-05 14:40:20 -06:00
Scott Lahteine
760c4e94d5 Write filler for disabled volumetrics 2018-01-05 10:20:17 -06:00
Scott Lahteine
a4e0fd7883 Pretty up TMC current write 2018-01-05 10:20:16 -06:00
Scott Lahteine
2287fa126c Whitespace cleanup 2018-01-05 10:19:15 -06:00
Scott Lahteine
fd4f49512d
Merge pull request #9054 from thinkyhead/bf1_fwretract_class 
[1.1.x] FWRetract class for 2.0.x parity
 2018-01-04 19:40:32 -06:00
MD
7d8acb8def [1.1.x] CheapTRONIC v2.0 pins additions/revisions (#9030) 2018-01-04 18:34:47 -06:00
Scott Lahteine
e7bf7e6031 Make FWRetract class for 2.0.x parity 2018-01-04 17:54:24 -06:00
Scott Lahteine
2ed4d4a30a Squish down process_parsed_command 2018-01-04 16:30:12 -06:00
Roxy-3D
d2dc7a53c2
use SERIAL_EOL(); instead of new line string 2018-01-04 16:18:00 -06:00
Roxy-3D
80cc860810
Use SERIAL_EOL(); instead of passing new line string 2018-01-04 16:16:28 -06:00
Roxy-3D
39289a6952
add precision to planner.xy_skew_factor so it doesn't print as 0.00 2018-01-04 16:11:05 -06:00
Roxy-3D
1761cacaa1
Add precision to planner:xy_skew so it doesn't print as 0.00 2018-01-04 16:07:20 -06:00
Scott Lahteine
f33b405152 M603 report in load/unload order 2018-01-04 05:20:56 -06:00
revilor
aec65112b5 Fix for issue #9005, #8942 - Bed PID autotuning (#9037) 2018-01-04 03:26:29 -06:00
Scott Lahteine
cce91eef61 Patch M701 get extruder arg 2018-01-04 02:13:10 -06:00
Scott Lahteine
46a839cbca No default needed 2018-01-03 22:52:25 -06:00
Scott Lahteine
c5e31b1723
Merge pull request #9032 from tcm0116/1.1.x-ultralcd 
[1.1.x] Fix 'lcd_temp_menu_e0_filament_change' was not declared error
 2018-01-03 21:34:37 -06:00
Scott Lahteine
01e3ccfd69 Cleanup, commentary of M303 pid tuning code 2018-01-03 20:48:43 -06:00
Scott Lahteine
a436e89b83 Fix resume_print positioning 2018-01-03 20:12:44 -06:00
Thomas Moore
faf7dda9d3 Fix 'lcd_temp_menu_e0_filament_change' was not declared error 2018-01-03 19:18:34 +00:00
Tannoo
d3139e47f8 [1.1.x] EEPROM init fix (#9002) 2018-01-03 04:28:15 -06:00
Thomas Moore
586d50ff99 Fix UBL compilation warnings 2018-01-02 19:41:02 -06:00
Scott Lahteine
ba9879f8fa
Merge pull request #9008 from karkla/bugfix-1.1.x 
[1.1.x] Update pins_MKS_BASE.h with Microstepping pin definitions
 2018-01-01 18:47:59 -06:00
Scott Lahteine
3cd48db9a9
Merge pull request #8983 from ABH10/bugfix-1.1.x_thermistor-tables 
[1.1.x] Update of comments in thermistor table files. No functional changes.
 2018-01-01 18:40:29 -06:00
karkla
454a8ae26a
Update pins_MKS_BASE.h 
Microstepping Pins (reverse engineered at V1.4)
Some new batches have the HR4982 (Heroic) instead of the A4982 (Allegro) as stepper driver. While most of the functionality is similar, the HR variant obviously doesn't work with diode smoothers (no fast decay). But the Heroic has a 128 µStepping mode where the A4982 is doing quarter steps (MS1=L / MS2=H). To achieve comfortable tests with the M350/M351 commands, the following definitions have to made.
 2018-01-02 01:29:27 +01:00
Scott Lahteine
9de9e37539 Some temperature code cleanup 2018-01-01 18:03:43 -06:00
Roxy-3D
949191215b
Z BabyStepping should not be dependent on a bed leveling system being active 2018-01-01 14:39:28 -06:00
Arne Husth
decf844788 Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
Scott Lahteine
642dec3625 Fix typo in delta buffer_line call 
Fix #8901
 2017-12-31 01:38:36 -06:00
Scott Lahteine
8e82dd0b5b
Merge pull request #8947 from houseofbugs/bugfix-1.1.x 
[1.1.x] SLIM_LCD_MENUS option
 2017-12-31 00:56:10 -06:00
Scott Lahteine
5f13e2e336
Merge pull request #8977 from thinkyhead/bf1_sync_up_configs 
[1.1.x] Synchronize configs with 2.0.x
 2017-12-31 00:55:39 -06:00
Scott Lahteine
4153d76810
Update Marlin_main.cpp 2017-12-31 00:24:57 -06:00
houseofbugs
a66811a597 A specific option to SLIM_LCD_MENUS 2017-12-31 00:15:24 -06:00
Scott Lahteine
839dd66c3b Synchronize configs with 2.0.x 2017-12-31 00:02:22 -06:00
Scott Lahteine
7a8c132ee9 Apply SLIM_LCD_MENUS to example configs 2017-12-30 23:52:53 -06:00
Thomas Moore
81193e9338 Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
Scott Lahteine
d1cad5afa4 Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs 2017-12-30 18:22:31 -06:00
Scott Lahteine
2a535bdce8 Followup to #8964 2017-12-30 16:47:26 -06:00
Claus Näveke
52244f690e Add example config for Tronxy X1 (#8964) 2017-12-30 16:38:42 -06:00
Scott Lahteine
2385c06696 Apply some PGM_P pointers 2017-12-30 04:16:50 -06:00
Scott Lahteine
81e0f5bc7d Single pause flag also indicates SD print pause 2017-12-30 04:16:50 -06:00
Scott Lahteine
18e277d9d3 Enqueue commands properly in ultralcd.cpp 2017-12-30 04:16:50 -06:00
Scott Lahteine
025a4558fb
Merge pull request #8944 from zarthcode/patch-1 
Fix malformed Capabilities report
 2017-12-28 21:06:23 -06:00
Scott Lahteine
85ca7fed93 Show bedlevel with Bed temp indicator 
…and display a third extruder on character display
 2017-12-28 20:21:47 -06:00
Anthony
7637eb863a
Fix malformed Capabilities report 2017-12-28 20:03:44 -06:00
Marcio Teixeira
6195f7810a Multi extruder support for M600 and LCD (FR #8672) 2017-12-26 22:59:05 -06:00
Scott Lahteine
ecba9b6738
Merge pull request #8897 from thinkyhead/bf1_lcd_click_redraw 
[1.1.x] Clear lcd_clicked on use
 2017-12-26 20:54:31 -06:00
Scott Lahteine
417bdb0488 Fix bug in NO_VOLUMETRICS 2017-12-26 19:56:22 -06:00
Timothy Hoogland
8ea3b29c17 Fix NO_VOLUMETRICS compile error 2017-12-26 19:32:09 -06:00
Scott Lahteine
81f1001b2c Clear lcd_clicked immediately on use 2017-12-25 21:50:58 -06:00
Scott Lahteine
5f0026893f Fix some compiler warnings 2017-12-25 08:51:35 -06:00
Scott Lahteine
4f943a73bc Fixes for G29 / 3POINT 2017-12-25 08:35:47 -06:00
Scott Lahteine
e31923be8d lcd_map_control deps on ULTIPANEL 2017-12-25 07:44:32 -06:00
Scott Lahteine
55848a4bd8 Allow consecutive uses of G29 2017-12-25 06:32:55 -06:00
Scott Lahteine
3c7cdcdc22 General cleanup of config-store, reset_bed_level 2017-12-25 04:23:52 -06:00
Scott Lahteine
e0d487e339 Update TMC2208 config store 2017-12-25 04:08:39 -06:00
Scott Lahteine
defff1e4a8 Fix GT2560 A+ servo pins 2017-12-25 02:20:13 -06:00
Scott Lahteine
05a6d48753 Tweak to M125 code 2017-12-25 01:33:46 -06:00
silentninja1
b12eb33feb Add support for pause and resume action commands on M600 2017-12-25 01:28:17 -06:00
Scott Lahteine
00749d8ef0 Add pause/resume action to example configs 2017-12-25 01:28:16 -06:00
Thomas Moore
59d047c1d7 [1.1.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8864) 
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
 2017-12-24 23:47:05 -06:00
Scott Lahteine
fb6b62a01b Comment return false in motion functions 2017-12-24 22:56:56 -06:00
Scott Lahteine
e47316c9d3 Tweak cleaning buffer / SD finished command 2017-12-24 20:33:58 -06:00
Scott Lahteine
88c0688961 Reduce default jerk. XY by half. Z by 1/4 2017-12-24 19:49:51 -06:00
Scott Lahteine
aa9cad0cc6
Merge pull request #8870 from petrzjunior/bugfix-1.1.x 
[1.1.x][Language] Update Czech for Dec 2017
 2017-12-24 18:48:37 -06:00
Scott Lahteine
0950527437
Fix WELCOME_MSG in PT 
From #8879
 2017-12-24 18:45:16 -06:00
Scott Lahteine
b7306ef07f
Fix WELCOME_MSG in PT 
From #8879
 2017-12-24 18:42:50 -06:00
Petr Zahradník
0fc3fea8df
Update Czech language Dec 2017 2017-12-22 18:33:11 +01:00
Scott Lahteine
b5677907d0 Minor speedup for SCARA scaling 
And cleanup of Delta IK macros...
 2017-12-21 22:39:06 -06:00
Scott Lahteine
6f40d57e14
Merge pull request #8851 from thinkyhead/bf1_more_scara_scaling 
[1.1.x] SCARA Feedrate Scaling for G2/G3 - using HYPOT
 2017-12-21 21:35:19 -06:00
Scott Lahteine
fdd85a529a Feedrate scaling for G2/G3 2017-12-20 19:33:16 -06:00
Scott Lahteine
477e36afab Revert "[bugfix-1.1.x] COREXY stutter moves (planner.cpp changes) (#8697)" 
This reverts commit 86b65e52c4.
 2017-12-20 15:59:56 -06:00
Scott Lahteine
1068798465 Restore position_float to LIN_ADVANCE 2017-12-20 06:58:42 -06:00
Scott Lahteine
4f375cd17d Match sign for filwidth across vars 2017-12-20 00:17:32 -06:00
Thomas Moore
98159c0507 [1.1.x][PlatformIO] Stop compiling after first five errors (#8828) 2017-12-19 23:59:19 -06:00
Scott Lahteine
ea345b1db7
Merge pull request #8738 from lumbric/bugfix-1.1.x 
Add missing CPP files to Make file, fixes #8731
 2017-12-19 23:46:23 -06:00
Scott Lahteine
ab7f1a0608 A single setting to validate filament width 2017-12-19 21:34:30 -06:00
Scott Lahteine
3929deed10 Add VOLUMETRIC capability item 2017-12-19 20:33:57 -06:00
Scott Lahteine
435981056e Option to disable all volumetric extrusion 2017-12-19 20:33:41 -06:00
Scott Lahteine
e6f46f3832 Add NO_VOLUMETRICS to example configs 2017-12-19 20:32:40 -06:00
Scott Lahteine
1aea024589 Remove redundant serial sanity check 2017-12-19 19:07:20 -06:00
Scott Lahteine
ce6a691999 Fix #8839 - filament width sensor 2017-12-19 18:24:56 -06:00
Scott Lahteine
10d73155b0 Hide LEVELING item for probeless w/out LCD Leveling 2017-12-17 21:24:46 -06:00
Scott Lahteine
4b1b02a17d Cleanup M503 output for M420 2017-12-17 21:24:46 -06:00
Scott Lahteine
56d355f8de Revert "[Bugfix-1.1.x] initial step correction (#8735)" 
This reverts commit ec028bf747.
 2017-12-17 02:04:44 -06:00
Scott Lahteine
f5fc851925 Sanity check parity with 2.0.x 2017-12-17 00:56:44 -06:00
Scott Lahteine
7378905053 Add MKS_12864OLED_SSD1306 to example configs 
Followup to #8813
 2017-12-16 19:58:34 -06:00
Dan Delaney
df8420aa62 Adding support for using the MKS_12864OLED with the SSD1306 controller 2017-12-16 17:44:34 -06:00
lumbric
3a511e4583 Add all CPP files to Makefile automatically 
Fixes build errors occurring when AUTO_BED_LEVELING_UBL is enabled.
 2017-12-16 20:29:47 +01:00
Dan Delaney
5249765508 Adding support for the Tronxy and Zonestar LCD 
Code borrowed and modified from erikkallen/Marlin_tronxy.
Changed the ANET_KEYPAD_LCD to zonestar, since it is the same device.
I kept a define for ANET_KEYPAD_LCD to enable ZONESTAR_LCD.
 2017-12-15 19:13:31 -06:00
Scott Lahteine
fdf83f1416 Apply ZONESTAR_LCD to example configs 2017-12-15 19:13:31 -06:00
Scott Lahteine
e1b998e40a More externs and functions in Marlin.h 2017-12-15 18:18:26 -06:00
Scott Lahteine
9a4af6bd7c Add NANODLP_ALL_AXIS to config examples 2017-12-15 16:05:29 -06:00
robpower
59265034ae Extended NanoDLP_Z_Move_Sync feature to G4 and G28, Added optional move_sync for all axis. 2017-12-15 16:05:29 -06:00
teemuatlut
0ac0324af2 [1.1.x] TMC driver update (#8712) 2017-12-15 15:02:39 -06:00
Scott Lahteine
f38f2ace5a
Correct unskew, after all 2017-12-15 14:23:20 -06:00
Dave Johnson
817eb5a5ba Missing HAS_HEAT_BED conditional 
Fixes issue found in #8779
 2017-12-15 11:36:36 -08:00
Scott Lahteine
f36f91dfb5 Reduce code with no heated bed 2017-12-13 17:59:17 -06:00
Scott Lahteine
172ea8c71c General code/bitmaps cleanup 2017-12-13 17:57:54 -06:00
Scott Lahteine
da9748fb21 Fix Planner::unskew parity with skew 2017-12-13 17:43:07 -06:00
Scott Lahteine
8519451161 Comment, improve filament width sensor 2017-12-13 02:35:23 -06:00
Scott Lahteine
7c1adff8ad Separate Dual X un-park from movement 2017-12-11 03:12:59 -06:00
Scott Lahteine
eca1509cb2 Skew should apply per-segment 
Segmented moves can account for skew points off the edge, while long regular cartesian moves may be off if the skewed destination point is outside movement bounds.

Followup to #8729
 2017-12-11 03:12:59 -06:00
Scott Lahteine
bdf69db0a8 Extend Skew Correction to UBL 2017-12-11 01:31:14 -06:00
Scott Lahteine
5cce532a29 One or the other? 2017-12-11 00:20:29 -06:00
Scott Lahteine
a20eacaa48 UBL devel debugging flag 2017-12-11 00:20:29 -06:00
Scott Lahteine
4f042533a5 Fix DUAL_X_CARRIAGE with UBL segmented 2017-12-11 00:20:29 -06:00
Scott Lahteine
6e8da93c42 UBL_DELTA => UBL_SEGMENTED 2017-12-11 00:20:29 -06:00
Scott Lahteine
bb33a26e62 Apply const to axis args 2017-12-11 00:20:29 -06:00
Scott Lahteine
da2eaa6b09 Use array refs where possible 2017-12-11 00:20:29 -06:00
Scott Lahteine
8244284116 _buffer_line => buffer_segment 2017-12-11 00:20:28 -06:00
Scott Lahteine
08d9aeff41 Update current position in M852 2017-12-10 23:05:34 -06:00
Scott Lahteine
aa1b4eded6 Have M420 report a changed position 2017-12-10 23:05:34 -06:00
Scott Lahteine
684692091e Sync and report changed position 2017-12-10 23:05:34 -06:00
Scott Lahteine
ccca1ade2d Always report position on config load/reset 2017-12-10 23:05:33 -06:00
Scott Lahteine
dc9e469c4c Tweak M114 detail 2017-12-10 19:15:37 -06:00
Bob-the-Kuhn
ec028bf747 [Bugfix-1.1.x] initial step correction (#8735) 
* tested

* forgot one item
 2017-12-09 18:20:25 -06:00
Scott Lahteine
009920f393 Followup to #8713 2017-12-09 08:06:22 -06:00
Scott Lahteine
666d95285b Mention that segments interpolate more 2017-12-09 06:18:41 -06:00
jkur
f4c31565bc Board definition and PIN assignments for Mini RAMBo1.0a 2017-12-08 23:41:34 -06:00
Scott Lahteine
cf0604da07 Use MB() for Megatronics 3.1 2017-12-08 23:39:47 -06:00
Scott Lahteine
55acb65e27 Updates for stepper parity with 2.0.x 
Matching changes from #8725
 2017-12-08 23:07:52 -06:00
Scott Lahteine
77519e9f14 Tweaks to planner.h 2017-12-08 21:11:17 -06:00
AnHardt
22baf3356a Apply @AnHardt reverse_pass changes 
Plus: 3 times 2 float / to 1 float / and 2 float *
      and, reciprocal is an optimized operation
 2017-12-08 21:11:17 -06:00
Bob-the-Kuhn
360c553228
Merge pull request #8718 from Bob-the-Kuhn/1.1x-planner-speed-improvemenr 
[bugfix-1.1.x] minor planner.cpp speed improvement (follow up to COREXY stutter changes PR #8697)
 2017-12-08 18:40:41 -06:00
Scott Lahteine
b4d69527e6 Followup to #8716 2017-12-08 18:18:06 -06:00
Scott Lahteine
4aba382b01
Merge pull request #8715 from thinkyhead/bf1_followup_8713 
Followup to #8713
 2017-12-08 18:14:57 -06:00
Bob-the-Kuhn
6f38814541 speed improvement 2017-12-08 18:02:57 -06:00
Scott Lahteine
7251850028 Followup to #8713 
Fix indentation, use min for constraint, remove obsolete error check
 2017-12-08 17:52:44 -06:00
Scott Lahteine
6eb268f63f Remove old UBL description text 2017-12-08 17:52:44 -06:00
Jonathan Barchi
ae547c3044 Nozzle.cpp: replace incorrect M_2_PI (2/pi) with 2.0 * M_PI 2017-12-08 15:33:24 -08:00
Roxy-3D
23dd2cb6e7
Better off mesh behavior for UBL (#8713) 
* Better off mesh behaviour for UBL

* Spacing changes...
 2017-12-08 16:36:03 -06:00
Scott Lahteine
8385cddd8d Followup to #8705 2017-12-08 03:48:24 -06:00
Scott Lahteine
75eb93140f Discard all CONTINUED blocks on interrupted move 2017-12-08 02:13:51 -06:00
Scott Lahteine
8be7a0b131 FORCE_INLINE before static 2017-12-08 01:31:59 -06:00
Scott Lahteine
cd6468d6de
Fix TEMP_BED_PIN for Mightyboard Rev.E 
Based on #8685
 2017-12-07 21:52:43 -06:00
Scott Lahteine
822254291f
Merge pull request #8702 from bjarchi/fix-1.1.x-probe_bounds 
Fix - Conditionals_post.h - allow overriding of [min,max] probe point
 2017-12-07 21:49:04 -06:00
Scott Lahteine
44800e9899 PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING 2017-12-07 16:46:06 -06:00
Scott Lahteine
6e85c060a9 Apply MULTIPLE_PROBING to example configs 2017-12-07 16:18:53 -06:00
Jonathan Barchi
7c6d33b0d2 Fix - Conditionals_post.h - allow overriding of [min,max] probe points as expected 2017-12-07 10:40:32 -08:00
Bob-the-Kuhn
86b65e52c4 [bugfix-1.1.x] COREXY stutter moves (planner.cpp changes) (#8697) 2017-12-07 00:08:48 -06:00
Scott Lahteine
6310a00d7e feed_factor => inverse_secs 2017-12-06 23:02:37 -06:00
Scott Lahteine
6b93d20e4e Sanity-check skew+UBL 2017-12-06 22:56:20 -06:00
Scott Lahteine
909fac6d90 Update commentary on M48 2017-12-06 22:50:13 -06:00
Scott Lahteine
1951d3a37a Simplify G26 user_canceled 2017-12-06 22:03:46 -06:00
Scott Lahteine
aa7236e03c Shorten error text in ubl::G29 2017-12-06 21:43:26 -06:00
Scott Lahteine
574153a810 No lcd_map_control needed in quick_stop 2017-12-06 21:43:26 -06:00
Scott Lahteine
3b30cc90f1 Clean on trigger instead of split_first_move flag 2017-12-06 21:43:26 -06:00
Scott Lahteine
1063b3b2b8 Changes for parity with 2.0.x 2017-12-06 21:19:17 -06:00
Scott Lahteine
93560836de Allow buffer clean without release command 2017-12-06 21:12:55 -06:00
Scott Lahteine
ff26b7446c Standardize LCD interface code for UBL a little 2017-12-06 21:12:55 -06:00
Scott Lahteine
7b6ad28a5d General UBL/G26 code cleanup 2017-12-06 21:12:55 -06:00
Scott Lahteine
5d01a2f467 Move temperature reporting to Temperature class 2017-12-06 21:12:55 -06:00
Scott Lahteine
6e197d4a42 Fix M503 S parameter 2017-12-06 21:12:55 -06:00
Scott Lahteine
a5b20fec2f Whitespace clean 2017-12-06 16:19:49 -06:00
AnHardt
b19846aca1 Don't split first_move while homing or probing 
While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.
 2017-12-06 14:56:37 +01:00
Scott Lahteine
d951ba83e6 Show "Level Bed Corners" item with UBL too 
Addressing #8676
 2017-12-05 21:56:04 -06:00
Scott Lahteine
203a445bc1 Minimal include for speed_lookuptable 2017-12-05 21:44:59 -06:00
Scott Lahteine
9edefa645d Remove skew warning that could crash the planner 2017-12-05 20:25:53 -06:00
Scott Lahteine
794f8f1329 Update K1 => PID_K1 2017-12-05 19:59:01 -06:00
revilor
b1f3dfab28 Fix for #8669 (#8677) 2017-12-05 19:40:57 -06:00
Scott Lahteine
2d6c84a817 Cleanup constexpr in planner.cpp 2017-12-05 18:54:25 -06:00
Scott Lahteine
23291a0466 Fix SKEW_CORRECTION without leveling 2017-12-05 18:47:19 -06:00
Scott Lahteine
83a1a70103 Creality pins spacing, MINIPANEL CS pin 2017-12-05 02:00:33 -06:00
Scott Lahteine
47f6fc1e07 Set initial endstops state 
Addressing #8662
 2017-12-05 01:08:39 -06:00
kein0r
f36fdc74ac Added RAMPS v1.4 Plus board 
Conflicts:
	Marlin/boards.h
 2017-12-05 00:43:02 -06:00
Scott Lahteine
ff258d43e7
Merge pull request #8661 from lumbric/bugfix-1.1.x 
Add missing library in Makefile
 2017-12-04 23:50:34 -06:00
Scott Lahteine
d8ef6faa80 Cleanup for dogm_bitmaps 2017-12-04 21:19:59 -06:00
Scott Lahteine
59eb77fd28 One fewer move required… 2017-12-04 20:35:33 -06:00
lumbric (antares)
dde0e9ee0a Add missing library in Makefile 
When using RELOC_WORKAROUND library needs to be linked explicitly, otherwise
eeprom functions are not available.

Thanks to @rfjakob for finding the crucial hint to solve this issue.
 2017-12-05 00:20:58 +01:00
Dave Johnson
860d98a897 [1.1.x] SERIAL_XON_XOFF not supported on USB-native AVR devices (#8653) 
* SERIAL_XON_XOFF not supported on USB-native AVR devices

User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.
 2017-12-04 16:48:19 -06:00
Scott Lahteine
000818f5e4 Split first move to planner for better chaining 2017-12-04 15:43:28 -06:00
Scott Lahteine
298a357a43 Revert "Merge pull request #8608 from thinkyhead/bf1_planner_split_first" 
This reverts commit 0eef0ff0de, reversing
changes made to d8582b7506.
 2017-12-03 17:49:24 -06:00
Scott Lahteine
44d2c5ef88 Fix M49 console hang 2017-12-03 03:36:12 -06:00
Scott Lahteine
1600f7d4ee
Merge pull request #8635 from fiveangle/bf1_report_xonxoff 
[1.1.x] Report SERIAL_XON_XOFF in M115
 2017-12-03 02:19:28 -06:00
Scott Lahteine
71a4c04dd5
Merge pull request #8636 from thinkyhead/bf1_ubl_uses_LSL 
[1.1.x] Use custom segment length for UBL Cartesian
 2017-12-03 01:57:32 -06:00
Scott Lahteine
1d0ee83e18 Split first move to planner for better chaining 
Address #8573, #8595
 2017-12-03 01:44:33 -06:00
Scott Lahteine
db8631e49a Use custom segment length for UBL Cartesian 2017-12-03 00:02:28 -06:00
Unknown
2e295759f2 [1.1.x] Report SERIAL_XON_XOFF in M115 
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
config updates
-Update error checking conditions
 2017-12-02 21:02:02 -08:00
Scott Lahteine
d8582b7506 Bring configurations up to date 2017-12-02 21:42:36 -06:00
dot-bob
7f656b867f Example configuration files for the Wanhao Duplicator 6 for bugfix-1.1.x (#8614) 
* Add default configuration files for the Wanhao Duplicator 6.

* Update Configuration.h
 2017-12-02 21:31:14 -06:00
Scott Lahteine
077fed1d88 Fix a homing comment 2017-12-02 20:57:35 -06:00
Scott Lahteine
152c5d2616 Followup to #8613 2017-12-02 20:47:33 -06:00
Scott Lahteine
26c5bbc5a7 Rename inverse_mm_s => inverse_secs 2017-12-02 20:13:31 -06:00
Jonathan Barchi
344e6b857a configuration_store.cpp: Fix in MarlinSettings::load for updated size of DELTA variables (#8630) 2017-12-02 19:04:52 -06:00
Roxy-3D
81e52138cc
More corrections for Bi-Linear to work with G26 2017-12-02 14:13:19 -06:00
Roxy-3D
a27a9b63e4
Get Bi_Linear macros correct to work with G26 
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
 2017-12-02 14:04:41 -06:00
Scott Lahteine
8b7c274db5 Comment/cleanup motion code 2017-12-02 01:42:37 -06:00
Scott Lahteine
7bed539fdb Fix missing return values in G33_auto_tune 2017-12-02 01:06:14 -06:00
Scott Lahteine
172ce67344 New feature: BED_SKEW_CORRECTION 2017-12-01 19:43:32 -06:00
Scott Lahteine
a8d83aec89 Add SKEW_CORRECTION to example configs 2017-12-01 19:43:31 -06:00
Scott Lahteine
38e5883d44 Apply const to thermal_runaway_protection args 2017-12-01 19:43:31 -06:00
Scott Lahteine
e7c6abd767 Update V45 Settings header 2017-11-30 22:26:21 -06:00
Roxy-3D
9f7405b3f0
Restore correct gMax 1.5+ G26 values 2017-11-30 18:11:01 -06:00
Scott Lahteine
d3f8111fe7 Use some int types in Planner 2017-11-30 18:03:51 -06:00
Scott Lahteine
d1a807fdf8 Drop obsolete Planner::position_float 2017-11-30 17:28:40 -06:00
Scott Lahteine
8df42a84a4 Fix fade bug in (un)apply_leveling 2017-11-30 17:28:40 -06:00
Scott Lahteine
8f462b5717 Add Planner::set_filament_size for 2.0.x parity 2017-11-30 16:52:19 -06:00
Scott Lahteine
68c1f05aeb Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
Scott Lahteine
1f770bb103 Config updates, spacing mainly 2017-11-29 20:57:38 -06:00
Tannoo
e25567a5dd New feature: LED_CONTROL_MENU 2017-11-29 20:57:38 -06:00
Scott Lahteine
9951f28892 Apply const to some planner vars 2017-11-29 20:57:38 -06:00
Scott Lahteine
80929c2637 Apply SEGMENT_LEVELED_MOVES to example configs 2017-11-29 16:58:16 -06:00
Scott Lahteine
d786fb99e2 Add an option to segment leveled moves 2017-11-29 16:58:15 -06:00
Scott Lahteine
a0fc5f7b52 Minor planner.cpp style changes 2017-11-29 15:00:33 -06:00
Scott Lahteine
ea87cd975d Tweak to check_axes_activity 2017-11-28 18:39:29 -06:00
Scott Lahteine
fd50f452ff Whitespace cleanup 2017-11-28 17:49:25 -06:00
Scott Lahteine
6eedb64777
Merge pull request #8586 from AnHardt/1_Fix_WDTO_during_long_DELTA_moves 
[1.1.x] Fix WDTO during long delta moves
 2017-11-28 17:27:08 -06:00
Scott Lahteine
46776de90b Fix M290 boolval bug 
Fix #8577
 2017-11-28 17:25:14 -06:00
Scott Lahteine
dfcef11bca Fix #8579 
Fan speed code fell into a curly brace
 2017-11-28 16:09:37 -06:00
AnHardt
f1757f30cb Fix Watchdog time out during long lasting DELTA moves 
During long lasting moves of a delta machine neither the temperatures are maintained nor buttons checked nor ... .
The fix is to call 'manage_heater()' and 'idle()' every now and then in the loop where the move is segmented. 
The code is abot the same as in G2_G3 wher we had the same problem with too large circles lasting too long.
Fixing #7510
 2017-11-28 17:10:18 +01:00
Scott Lahteine
ddab1533c5 Simplify midpos calculation 2017-11-27 14:01:42 -06:00
Scott Lahteine
915c4b9ce2 Make MBL work more like PROBE_MANUALLY 2017-11-27 00:09:23 -06:00
Scott Lahteine
d7cc26cc17 Allow override of probe bounds in configs 2017-11-26 20:57:00 -06:00
Scott Lahteine
5bc5ba7ee3 More reliable set characters after bootscreen 2017-11-26 20:02:51 -06:00
Scott Lahteine
82df656cc7 Tweak readDir code 2017-11-26 18:23:34 -06:00
Scott Lahteine
51d09bb9c9 Tweak BLOCK_BUFFER_SIZE config 2017-11-26 17:33:33 -06:00
Scott Lahteine
5a1f1305f0 SD Menu patches 2017-11-26 01:10:06 -06:00
Scott Lahteine
3cf31205bc Tweaks to bed leveling menus 2017-11-26 00:06:10 -06:00
Scott Lahteine
26a40373fc Adjustments to blocking moves 2017-11-25 23:32:53 -06:00
Scott Lahteine
6b9e7defac M211 output in current workspace 2017-11-25 20:47:36 -06:00
Scott Lahteine
a63d9cc550 Loosen HAS_BED_PROBE definition 2017-11-25 20:10:03 -06:00
Scott Lahteine
1e84cded98 Parity with 2.0.x bitmap functions 
Based on #8565
 2017-11-25 19:56:22 -06:00
Scott Lahteine
bb0cc1bbbc Fix gcode_G26 error return 2017-11-25 19:51:03 -06:00
Scott Lahteine
941ffea81c Fix Micromake C1 config 2017-11-25 18:42:42 -06:00
Scott Lahteine
737cee4b8c Syntax tweaks 2017-11-25 18:15:16 -06:00
Scott Lahteine
d3165cca4f Move BABYSTEP_ZPROBE_GFX_OVERLAY up 2017-11-25 17:28:12 -06:00
Scott Lahteine
2060ba3556 M290 report on change, P0 to leave Probe Z Offset unchanged 2017-11-25 16:51:00 -06:00
Scott Lahteine
e56ead5e1c Followup to G33 patch 2017-11-25 16:01:55 -06:00
LVD-AC
8b9e68c32d [1.1.x] G33 probe error handing 2017-11-25 15:44:30 -06:00
Scott Lahteine
b2d3fffe74 Patches for M290, M851 2017-11-25 14:10:49 -06:00
Scott Lahteine
b5c5b175f1 Dont use Z_MIN_PROBE_ENDSTOP for DELTA 2017-11-24 18:28:27 -06:00
Thomas Moore
ecf19344f6 Initialize mixing virtual tools to behave like standard a multi-extruder setup (#6853) 
* Initialize mixing virtual tools to behave like standard a multi-extruder setup

* Update Marlin_main.cpp

* Update Marlin_main.cpp
 2017-11-24 18:06:32 -06:00
Scott Lahteine
b2473e57dd Apply LINEAR_UNIT to M503 output for M200 2017-11-24 17:31:00 -06:00
Scott Lahteine
d38aaa0c7e
Merge pull request #8550 from thinkyhead/bf1_fix_probe_pt 
Fix #8540
 2017-11-24 17:15:05 -06:00
Scott Lahteine
adee17847c Fix #8540 
Does it?
 2017-11-24 17:05:42 -06:00
oliver
a7d82bd73b MK2_MULTIPLEXER does not require E2/E3 stepper pins 2017-11-24 23:58:37 +01:00
Scott Lahteine
59a699063a Fix #8537 2017-11-24 15:54:03 -06:00
Scott Lahteine
ff800e08fd Phatter arrows for Z offset overlay 2017-11-24 15:54:03 -06:00
Scott Lahteine
c0190eff00 Adapt MESH_EDIT_GFX_OVERLAY for 1.1.x 2017-11-24 15:54:02 -06:00
Scott Lahteine
4e445f2c55 Keep Micromake C1 name on LCD? 2017-11-24 13:18:34 -06:00
Scott Lahteine
9da817eae0 Make LCD_LANGUAGE consistent in all configs 2017-11-24 13:18:34 -06:00
Scott Lahteine
7cf4009838 Fix MK2_MULTIPLEXER stepper indirection 
Addressing #8544
 2017-11-24 12:47:10 -06:00
Rob Power
f8e30f49d7 Add NanoDLP Z movement synchronization option 
Implemented synchronization message output for NanoDLP printers (nanodlp.com).
If optional feature is enabled in `Configuration_adv.h`, Marlin will ouput "Z_move_comp" string to serial after completing any G0/G1 Z-axis movements. This feature patched on previous versions(1.0) is used by NanoDLP to synchronize Z-axis movement with projector exposure in DLP stereolithography printers.
 2017-11-24 00:32:03 -06:00
Scott Lahteine
3b431f2f72 Arrange G26 functions in dependency order 2017-11-23 22:30:22 -06:00
Scott Lahteine
e5b43d48ee Apply G26 for meshes to all configs 2017-11-23 21:41:27 -06:00
Roxy-3D
8282d732c1 Make G26 work with all mesh leveling. 
Example Configuration.h files are not updated yet.   You need to cross
your settings over to the default Configuration.h file in the \Marlin
directory.   (UBL_G26_MESH_VALIDATION enablement has moved to a new
location in the file.)
 2017-11-23 21:41:27 -06:00
Scott Lahteine
82f41d6e46 fix fan kickstart 2017-11-23 21:40:31 -06:00
Scott Lahteine
b8c65078fc NEOPIXEL_RGBW_LED => NEOPIXEL_LED 2017-11-23 16:41:04 -06:00
Scott Lahteine
04419af419 Reorganize check_axes_activity 2017-11-23 15:29:35 -06:00
Scott Lahteine
ed6a5ff7e5
Merge pull request #8524 from GMagician/1.1.x-tool-change-bad-behaviour-fix 
[1.1.x] Tool change bad behaviour fix
 2017-11-22 20:23:02 -06:00
Scott Lahteine
956680104b Tweak char_mode init 2017-11-22 19:10:54 -06:00
Scott Lahteine
99b71c1dde Move lcd_map_control to UBL 
For parity with bugfix-2.0.x
 2017-11-22 18:45:55 -06:00
Scott Lahteine
73ddc762c8 Fix up LCD init / charset 2017-11-22 18:07:03 -06:00
GMagician
7a5b3a1e6a [1.1.x] Tool change bad behaviour fix 
Just aligned with version 2.0. Here bug was not present
 2017-11-22 23:51:07 +01:00
Scott Lahteine
e2568d7589 Fix delta_safe_distance_from_top 2017-11-22 14:11:04 -06:00
Scott Lahteine
0b1d754e7d Fix G42 2017-11-22 14:11:04 -06:00
Scott Lahteine
bbc2ee6da1
Don't re-init graphical LCD after boot screen 
Followup to 13a3fb1acc
 2017-11-21 18:21:50 -06:00
GMagician
b96ceb4256 [1.1.x] tool change bad behaviours 
This PR will address two issues reported in #8492. Just one is left because I don't know if it is an issue or not

1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
2) Since no move no bed level matrix should be applied
    When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
 2017-11-20 16:39:32 -06:00
Scott Lahteine
b6dbc4c5c1
Merge pull request #8426 from SteveGotthardt/bugfixes 
[1.1.x]Update Anet A8 default values from my Anet A8 experience
 2017-11-20 15:12:46 -06:00
Bob-the-Kuhn
12b018e619
Merge pull request #8487 from Bob-the-Kuhn/M43-compatibility-1.1.x 
[1.1.x] M43 end pin correction/compatibility
 2017-11-19 11:01:10 -06:00
Bob-the-Kuhn
9b80e1e04a change to L for end pin for M43 Toggle command 2017-11-18 13:48:53 -06:00
Scott Lahteine
bf6a1816b4 Display volumetric ratio in terms of E mm 2017-11-18 07:03:18 -06:00
Scott Lahteine
4f05a66ee1 Fixes #8472 2017-11-18 05:14:31 -06:00
Scott Lahteine
622d100c30 No retroactive changes with M851 Z 2017-11-18 03:37:07 -06:00
Scott Lahteine
74997a5251 Fix comment in planner.h 2017-11-18 02:30:41 -06:00
Roxy-3D
50148f7185
Update the UBL Probable Area for Delta's 
This is a non-intuitive change.   @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits.   This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
 2017-11-17 16:41:31 -06:00
Scott Lahteine
8f57a3e28a Apply coding standards to Max7219 code 2017-11-17 15:33:55 -06:00
Scott Lahteine
2511e869e2
Update Configuration.h 2017-11-16 23:18:55 -06:00
Scott Lahteine
aa612124f2
Merge pull request #8452 from tcm0116/1.1.x-pio_deps 
[1.1.x] Fix PlatformIO dependencies
 2017-11-16 22:54:15 -06:00
Scott Lahteine
eb3bdb7550 Fix FILAMENT_LCD_DISPLAY, disabled state, optimize 2017-11-16 17:46:08 -06:00
Thomas Moore
97c19de8b9 Fix PlatformIO dependencies 2017-11-16 15:16:21 -06:00
Scott Lahteine
4e19c59ab3 Miscellaneous cleanup 2017-11-16 01:18:05 -06:00
Scott Lahteine
9cf5b96971 Fix M503 output for M145 
Fixes #7978
 2017-11-15 04:00:39 -06:00
Scott Lahteine
69a710fef1 Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
Scott Lahteine
d2613ce077
Merge pull request #8432 from thinkyhead/bf1_fix_M32_subroutines 
[1.1] Fix 'M32 P' subroutines
 2017-11-15 02:31:21 -06:00
Scott Lahteine
f2e222b9e8
Merge pull request #8419 from RowanMeara/rm-dithering-1.1.x 
[1.1.x] Fix Software Fan PWM
 2017-11-15 02:29:59 -06:00
Scott Lahteine
a6ee4a0468 Apply SDCARD_SORT_ALPHA changes from 2.0.x 2017-11-15 01:09:13 -06:00
Scott Lahteine
d3b8f30818 Fix M32 P subroutine handling 2017-11-15 01:09:06 -06:00
Scott Lahteine
2390f6d3ab Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
Scott Lahteine
eacb6b6e8b Fix parser value handling 2017-11-14 23:23:22 -06:00
Steven Gotthardt
7efffc1548 Update Anet A8 default values from my Anet A8 experience 2017-11-14 10:47:30 -07:00
RowanMeara
10e366ebd7 Change dithering behavior to intended. 2017-11-14 00:36:35 -08:00
Scott Lahteine
95590adf07 Make sure leveled[] is enabled for use 2017-11-14 02:12:20 -06:00
Scott Lahteine
8d06cf7b84 Add M114_DETAIL to Configuration_adv.h 2017-11-14 00:06:35 -06:00
Steven Gotthardt
645b586041 Fix warnings for REPRAPWORLD_KEYPAD 2017-11-13 22:25:17 -06:00
Scott Lahteine
069ec3f9a9 Move Filament Width Sensor to Configuration_adv.h 2017-11-13 21:06:40 -06:00
Scott Lahteine
56035e9965 Move mesh test options under G26 option 2017-11-13 21:06:40 -06:00
Scott Lahteine
d65c99f38b Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
Scott Lahteine
90c7d28055 Extrudrboard support for Printrboard Rev.F 2017-11-13 15:47:03 -06:00
Scott Lahteine
8b684637bc
Merge pull request #8397 from RowanMeara/rm-M428-1.1.x 
[1.1.x] Fix M428
 2017-11-13 15:11:36 -06:00
Rowan Meara
d2df00bfca [1.1.x] Fix compilation warnings (#8395) 
* Fix up Travis CI and compile warnings/errors

* No ULTRA_LCD with REPRAP_DISCOUNT_SMART_CONTROLLER

* No point in setting all the endstop plugs
 2017-11-13 04:18:19 -06:00
Scott Lahteine
25ec0fecfa Apply native workspace fixes to G92, G53-59 2017-11-13 01:53:44 -06:00
RowanMeara
227b96b28b Fix M428 
This fixes the old implementation of M428 which was broken, did not
match the website, and made no sense.
 2017-11-13 01:34:43 -06:00
Scott Lahteine
a2c013c8c7 Fix LCD pins for Printrboard v1 2017-11-13 00:10:27 -06:00
Scott Lahteine
f27196214b Fix Printrboard pins for parity with 2.0 2017-11-13 00:03:11 -06:00
Scott Lahteine
aa616cd410 No leveling data in M114 without leveling 2017-11-12 23:06:16 -06:00
Scott Lahteine
5926159890 Fix report_current_position 
Thanks @RowanMeara!
 2017-11-12 22:57:57 -06:00
Roxy-3D
c9f88297b8
Provide more clearance for BL-Touch probe 2017-11-12 13:09:10 -06:00
Scott Lahteine
5cc87abb3a
Merge pull request #8381 from thinkyhead/bf1_native_followup 
[1.1] Remove offsets from soft endstops, tool change
 2017-11-11 23:13:40 -06:00