MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,780 Commits 1 Branch 0 Tags 96 MiB
fcb19823db
Commit Graph

8117 Commits

Author SHA1 Message Date
Scott Lahteine
d29a0d64d5
Set FIL_RUNOUT_PIN for Creality CR10-S 
Tested with M43 and found to be connected to DIO 2
 2018-01-20 11:58:37 -06:00
Scott Lahteine
09ad00b2d1
Use standard encoder pulses/steps for CR-10S 2018-01-20 11:34:53 -06:00
Thomas Moore
f8192f6e46 Allow DELTA to compile with soft endstops disabled 2018-01-20 09:43:59 -06:00
Scott Lahteine
f360b3b849
Date refresh 2018-01-20 09:17:00 -06:00
Scott Lahteine
74c23bf80d
Merge pull request #9232 from GMagician/1.1.x-ramps-pins-fixup 
[1.1.x] Expand RAMP case light possibilities
 2018-01-19 22:29:09 -06:00
Scott Lahteine
8d14ff1446
Merge pull request #9248 from GMagician/1.1.x-bed-temp-limit-fix 
[1.1.x] Standardized max temp values
 2018-01-19 22:27:00 -06:00
GMagician
2814103458 Standardized max temp values 
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
 2018-01-19 19:41:45 +01:00
Bob-the-Kuhn
d0e61d82c0 TMC2208 sanity check 2018-01-18 23:16:41 -06:00
Roxy-3D
0edf5a2ab5
Better handle serial over runs... 2018-01-18 16:51:27 -06:00
Roxy-3D
597d94bd3a
Better handle serial buffer over run 2018-01-18 16:48:12 -06:00
Roxy-3D
73565728c7
Further clean up for serial over run issue during long operations 2018-01-18 14:38:18 -06:00
GMagician
3b53c5ada1 Expand RAMP case light possibilities 
Pin 6 is only used by servos when 2 or more of them are used
 2018-01-18 18:35:08 +01:00
Roxy-3D
cbdbeb3e69
PronterFace M105 work around (#9227) 
PronterFace keeps sending M105 requests during long operations like G29 P1, G29 P2, G29 P4 and G26. The serial buffer fills up before the operation is complete. The problem is, a corrupted command gets executed. It is very typical for the M105 to turn into a M1 (actually... M1M105 is typical).

This causes the printer to say "Click to resume..."

This is a temporary fix until we figure out the correct way to resolve the issue.

More work needed for G26.
 2018-01-17 22:51:19 -06:00
Roxy-3D
80c1afde0f
Fix mesh size... 2018-01-17 09:33:18 -06:00
Roxy-3D
c11665e92f
Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 (#9213) 
The changes to ultralcd.cpp for is_lcd_clicked() did not encompass the
full functionality of UBL's G29 P1, P2 and P4.   It also broke G26's
ability to abort in several of its phases.

This is the first pass at fixing the problem.   It has been tested for
correctness for several hours but more testing  needs to be done.
There may be a few follow up patches to finish covering all the corner
cases, but right now I need to merge this before any conflicts show up.

Some of these changes will need to be moved over to the bugfix-v2.0.0
branch.   That will happen a few days from now.
 2018-01-17 00:27:50 -06:00
Scott Lahteine
333bd8f394
Merge pull request #9203 from benlye/m73-bugfix-1.1.x 
[1.1.x] Fix progress bar duration when time is exactly 86400s
 2018-01-16 21:14:31 -06:00
Bob-the-Kuhn
ba9aa47260
Revert "[1.1.x] Fix missing deceleration steps" 2018-01-16 11:31:27 -06:00
blye
deda3d3a3c Fix duration when time is exactly 86400s 2018-01-16 08:16:42 +00:00
Bob-the-Kuhn
ec028faa1b
Merge pull request #9174 from Sebastianv650/fix_missing_decel_steps 
[1.1.x] Fix missing deceleration steps
 2018-01-15 21:03:51 -06:00
Roxy-3D
06adef7343
Get FT-i3-2020 example files in compliance with ?_BED_SIZE 2018-01-15 15:32:19 -06:00
Scott Lahteine
69c993092b Followup to Ender config 2018-01-15 05:48:50 -06:00
Tommie Gannert
f3f26f7cb3 Creality Ender support. 
Reverse engineered from the unpublished firmware from Creality,
inferring the base version and configuration they used. The basis is
the firmware version from "Jul 31 2017 10:16:30". Configurations were
found by seeing what code was compiled into the firmware, and
constants used there.

They used Marlin 1.0.1, because

* 1.0.0 had very different serial output in `setup()` and overall
  code structure.
* 1.0.2 changed the `VERSION_STRING` to include a leading space,
  and `lcd_init` uses `SET_INPUT` instead of `pinMode`.

For U8Glib, a version between 1.14 and 1.17 was used, because

* 1.12 didn't have the extra speed argument to u8g_InitCom.
* 1.13 didn't have the soft reset instruction for UC1701 initialization.
* 1.18 has a new directory structure.

Quirks

* The value of PID_dT hints that F_CPU is 20M, but MarlinSerial.begin
  suggests it's indeed 16M (and the board uses 16M). Left at 16M for now.

* The LED and DOGLCD_CS are on the same pin.
 2018-01-15 03:39:43 -06:00
Scott Lahteine
a16ae30a61 More featureful CR-10S configuration 2018-01-15 01:02:23 -06:00
Scott Lahteine
175207659a
Merge pull request #9183 from thinkyhead/bf1_new_flsun_config 
[1.1.x] Add FLSUN Kossel configuration
 2018-01-15 00:49:25 -06:00
Scott Lahteine
5129eb1d43 More reliable temperature serial output? 2018-01-15 00:44:55 -06:00
Scott Lahteine
8f08e029d8 More up-front option to show SD percentage 2018-01-14 23:30:59 -06:00
Scott Lahteine
5c6c12dc3a Patch EEPROM for 32-bit 2018-01-14 23:18:45 -06:00
Scott Lahteine
734fa91e63 Misc config updates 2018-01-14 23:18:45 -06:00
Scott Lahteine
1d5eba4470 Add FLSUN Kossel configuration 2018-01-14 23:18:45 -06:00
Scott Lahteine
758d9db964 Link to marlinfw.org bitmap tool 2018-01-14 22:39:57 -06:00
Scott Lahteine
1d8b03964f
Merge pull request #9164 from GMagician/1.1.x-SD-issues-fix 
[1.1.x] sd issue fix
 2018-01-14 20:47:04 -06:00
Sebastianv650
4fa0937a55 Fix missing deceleration steps 
Marlin never reached final_speed after deceleration.
 2018-01-14 17:09:47 +01:00
GMagician
82dc89bfd2 Save some program memory 
This will save some program memory with no speed lose
 2018-01-13 09:46:54 +01:00
GrantM11235
a0bd811093 [1.1.x] Fix support for Malyan M150 (#9146) 
Implements changes to LCD and encoder pins from
forums.reprap.org/read.php?110,716538,728278 and also sets
ST7920_DELAY_[1-3] to DELAY_2_NOP to be compatible with the slower LCD
 2018-01-12 01:14:07 -06:00
Scott Lahteine
c1d6d24b9d Cleanup spacing, commentary 2018-01-11 18:52:54 -06:00
Sebastianv650
e2871f0dcd [1.1.x] Ensure smooth printer movements (#9149) 
- Never execute a block without an up-to-date trapezoid
- Start blocks with MINIMUM_PLANNER_SPEED, except when coming from a full stop
 2018-01-11 18:50:18 -06:00
Bob-the-Kuhn
4393c3ef7f LCD_CONTRAST to uint16_t for 1.1.x parity (#9148) 2018-01-11 18:32:41 -06:00
Scott Lahteine
e8b1bbac83 Creality CR-10S configurations 
Provided by printedsolid.com
 2018-01-11 01:03:34 -06:00
Scott Lahteine
885200f833 Bring other configs up-to-date 2018-01-11 01:03:34 -06:00
Scott Lahteine
3df0d62725 Updates to TMC support 2018-01-10 04:32:49 -06:00
Scott Lahteine
d1ce0bc071 M915 Z Axis Calibration 2018-01-09 18:55:08 -06:00
Scott Lahteine
9714c9aebe
Merge pull request #9128 from fiveangle/bf1-disable_serial_stats_on_usbcon 
[1.1.x] SERIAL_STATS_* features not supported on USBCON targets
 2018-01-09 18:42:26 -06:00
Dave Johnson
2fcef3e8e2 Enable USE_ZMIN_PLUG on SCARA example (#9125) 2018-01-09 18:41:02 -06:00
Dave Johnson
dd55c98139 SERIAL_STATS_* features not supported on USBCON targets 2018-01-09 16:27:57 -08:00
Scott Lahteine
bb5ba482bc More EEPROM field debugging 2018-01-09 18:10:33 -06:00
GMagician
5903b002ac 1.1.x semitec 104NT-4 added (#9120) 
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
 2018-01-09 16:53:44 -06:00
Anthony
1326eb4ef7
fix fwretract structure reference #9102 
Marlin_main.cpp: In function 'void resume_print(const float&, const float&, int8_t)':

Marlin_main.cpp:6646: error: 'retract_length' was not declared in this scope
         do_pause_e_move(-retract_length, fwretract.retract_feedrate_mm_s);
                          ^
 2018-01-08 18:48:19 -06:00
Scott Lahteine
0eee55c0dd Patch TMC current read from EEPROM 2018-01-07 20:49:43 -06:00
Scott Lahteine
f8dee4e726
Merge pull request #9088 from thinkyhead/bf1_mbl_localize 
[1.1.x] MBL cleanup, has_mesh() method
 2018-01-07 20:10:10 -06:00
Tannoo
2c3bdfe2ea [1.1.x] UBL Mesh Storage Message (#9094) 2018-01-07 20:07:20 -06:00
Scott Lahteine
ffeb4495fe Make mbl.has_mesh() a method 2018-01-07 18:14:37 -06:00
Scott Lahteine
be555e3578 Move MBL functions into the class 2018-01-07 18:14:37 -06:00
Scott Lahteine
eec97a5cf1 Don't wrap mbl.h in conditionals 2018-01-07 00:24:46 -06:00
Scott Lahteine
fa3709451b
Set mbl.has_mesh on manual point entry 
Based on #9086
 2018-01-06 23:32:00 -06:00
Scott Lahteine
eaa6257baf
Fix M503 skew output 
Followup to 1761cacaa1
 2018-01-06 20:53:33 -06:00
Someone Unknown
b5e98ac1b7 Set laser/spindle PWM to lowest speed on M5 2018-01-06 14:01:58 -06:00
GMagician
4cb35a285b Bmp fix 
Clockwise arrow fixed
 2018-01-06 19:08:37 +01:00
Bob-the-Kuhn
0b5b2a424c
Merge pull request #9067 from MarlinFirmware/SD-detect 
[bugfix-1.1.x] SD card detect fix
 2018-01-05 20:32:33 -06:00
Bob-the-Kuhn
0868907359 works 2018-01-05 19:12:34 -06:00
Scott Lahteine
670df2ea6d Settings FIELD_TEST fix 2018-01-05 19:12:22 -06:00
Scott Lahteine
fbda8a2e2b UBL G29 works without settings.load 2018-01-05 15:47:52 -06:00
Scott Lahteine
3d34dddbc0 Squish lcd_advanced_pause_show_message 2018-01-05 15:47:52 -06:00
Scott Lahteine
3b3b7e09ec Add FIELD_TEST to validate storage 2018-01-05 15:47:52 -06:00
Scott Lahteine
5d26f88bd5 Add data size validation 2018-01-05 15:47:52 -06:00
Scott Lahteine
51977c64ee Add a struct defining EEPROM storage 2018-01-05 15:47:51 -06:00
Scott Lahteine
42216f52ab Add MarlinSettings::validate() 2018-01-05 14:40:20 -06:00
Scott Lahteine
760c4e94d5 Write filler for disabled volumetrics 2018-01-05 10:20:17 -06:00
Scott Lahteine
a4e0fd7883 Pretty up TMC current write 2018-01-05 10:20:16 -06:00
Scott Lahteine
2287fa126c Whitespace cleanup 2018-01-05 10:19:15 -06:00
Scott Lahteine
fd4f49512d
Merge pull request #9054 from thinkyhead/bf1_fwretract_class 
[1.1.x] FWRetract class for 2.0.x parity
 2018-01-04 19:40:32 -06:00
MD
7d8acb8def [1.1.x] CheapTRONIC v2.0 pins additions/revisions (#9030) 2018-01-04 18:34:47 -06:00
Scott Lahteine
e7bf7e6031 Make FWRetract class for 2.0.x parity 2018-01-04 17:54:24 -06:00
Scott Lahteine
2ed4d4a30a Squish down process_parsed_command 2018-01-04 16:30:12 -06:00
Roxy-3D
d2dc7a53c2
use SERIAL_EOL(); instead of new line string 2018-01-04 16:18:00 -06:00
Roxy-3D
80cc860810
Use SERIAL_EOL(); instead of passing new line string 2018-01-04 16:16:28 -06:00
Roxy-3D
39289a6952
add precision to planner.xy_skew_factor so it doesn't print as 0.00 2018-01-04 16:11:05 -06:00
Roxy-3D
1761cacaa1
Add precision to planner:xy_skew so it doesn't print as 0.00 2018-01-04 16:07:20 -06:00
Scott Lahteine
f33b405152 M603 report in load/unload order 2018-01-04 05:20:56 -06:00
revilor
aec65112b5 Fix for issue #9005, #8942 - Bed PID autotuning (#9037) 2018-01-04 03:26:29 -06:00
Scott Lahteine
cce91eef61 Patch M701 get extruder arg 2018-01-04 02:13:10 -06:00
Scott Lahteine
46a839cbca No default needed 2018-01-03 22:52:25 -06:00
Scott Lahteine
c5e31b1723
Merge pull request #9032 from tcm0116/1.1.x-ultralcd 
[1.1.x] Fix 'lcd_temp_menu_e0_filament_change' was not declared error
 2018-01-03 21:34:37 -06:00
Scott Lahteine
01e3ccfd69 Cleanup, commentary of M303 pid tuning code 2018-01-03 20:48:43 -06:00
Scott Lahteine
a436e89b83 Fix resume_print positioning 2018-01-03 20:12:44 -06:00
Thomas Moore
faf7dda9d3 Fix 'lcd_temp_menu_e0_filament_change' was not declared error 2018-01-03 19:18:34 +00:00
Tannoo
d3139e47f8 [1.1.x] EEPROM init fix (#9002) 2018-01-03 04:28:15 -06:00
Thomas Moore
586d50ff99 Fix UBL compilation warnings 2018-01-02 19:41:02 -06:00
Scott Lahteine
ba9879f8fa
Merge pull request #9008 from karkla/bugfix-1.1.x 
[1.1.x] Update pins_MKS_BASE.h with Microstepping pin definitions
 2018-01-01 18:47:59 -06:00
Scott Lahteine
3cd48db9a9
Merge pull request #8983 from ABH10/bugfix-1.1.x_thermistor-tables 
[1.1.x] Update of comments in thermistor table files. No functional changes.
 2018-01-01 18:40:29 -06:00
karkla
454a8ae26a
Update pins_MKS_BASE.h 
Microstepping Pins (reverse engineered at V1.4)
Some new batches have the HR4982 (Heroic) instead of the A4982 (Allegro) as stepper driver. While most of the functionality is similar, the HR variant obviously doesn't work with diode smoothers (no fast decay). But the Heroic has a 128 µStepping mode where the A4982 is doing quarter steps (MS1=L / MS2=H). To achieve comfortable tests with the M350/M351 commands, the following definitions have to made.
 2018-01-02 01:29:27 +01:00
Scott Lahteine
9de9e37539 Some temperature code cleanup 2018-01-01 18:03:43 -06:00
Roxy-3D
949191215b
Z BabyStepping should not be dependent on a bed leveling system being active 2018-01-01 14:39:28 -06:00
Arne Husth
decf844788 Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
Scott Lahteine
642dec3625 Fix typo in delta buffer_line call 
Fix #8901
 2017-12-31 01:38:36 -06:00
Scott Lahteine
8e82dd0b5b
Merge pull request #8947 from houseofbugs/bugfix-1.1.x 
[1.1.x] SLIM_LCD_MENUS option
 2017-12-31 00:56:10 -06:00
Scott Lahteine
5f13e2e336
Merge pull request #8977 from thinkyhead/bf1_sync_up_configs 
[1.1.x] Synchronize configs with 2.0.x
 2017-12-31 00:55:39 -06:00
Scott Lahteine
4153d76810
Update Marlin_main.cpp 2017-12-31 00:24:57 -06:00
houseofbugs
a66811a597 A specific option to SLIM_LCD_MENUS 2017-12-31 00:15:24 -06:00
Scott Lahteine
839dd66c3b Synchronize configs with 2.0.x 2017-12-31 00:02:22 -06:00
Scott Lahteine
7a8c132ee9 Apply SLIM_LCD_MENUS to example configs 2017-12-30 23:52:53 -06:00
Thomas Moore
81193e9338 Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
Scott Lahteine
d1cad5afa4 Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs 2017-12-30 18:22:31 -06:00
Scott Lahteine
2a535bdce8 Followup to #8964 2017-12-30 16:47:26 -06:00
Claus Näveke
52244f690e Add example config for Tronxy X1 (#8964) 2017-12-30 16:38:42 -06:00
Scott Lahteine
2385c06696 Apply some PGM_P pointers 2017-12-30 04:16:50 -06:00
Scott Lahteine
81e0f5bc7d Single pause flag also indicates SD print pause 2017-12-30 04:16:50 -06:00
Scott Lahteine
18e277d9d3 Enqueue commands properly in ultralcd.cpp 2017-12-30 04:16:50 -06:00
Scott Lahteine
025a4558fb
Merge pull request #8944 from zarthcode/patch-1 
Fix malformed Capabilities report
 2017-12-28 21:06:23 -06:00
Scott Lahteine
85ca7fed93 Show bedlevel with Bed temp indicator 
…and display a third extruder on character display
 2017-12-28 20:21:47 -06:00
Anthony
7637eb863a
Fix malformed Capabilities report 2017-12-28 20:03:44 -06:00
Marcio Teixeira
6195f7810a Multi extruder support for M600 and LCD (FR #8672) 2017-12-26 22:59:05 -06:00
Scott Lahteine
ecba9b6738
Merge pull request #8897 from thinkyhead/bf1_lcd_click_redraw 
[1.1.x] Clear lcd_clicked on use
 2017-12-26 20:54:31 -06:00
Scott Lahteine
417bdb0488 Fix bug in NO_VOLUMETRICS 2017-12-26 19:56:22 -06:00
Timothy Hoogland
8ea3b29c17 Fix NO_VOLUMETRICS compile error 2017-12-26 19:32:09 -06:00
Scott Lahteine
81f1001b2c Clear lcd_clicked immediately on use 2017-12-25 21:50:58 -06:00
Scott Lahteine
5f0026893f Fix some compiler warnings 2017-12-25 08:51:35 -06:00
Scott Lahteine
4f943a73bc Fixes for G29 / 3POINT 2017-12-25 08:35:47 -06:00
Scott Lahteine
e31923be8d lcd_map_control deps on ULTIPANEL 2017-12-25 07:44:32 -06:00
Scott Lahteine
55848a4bd8 Allow consecutive uses of G29 2017-12-25 06:32:55 -06:00
Scott Lahteine
3c7cdcdc22 General cleanup of config-store, reset_bed_level 2017-12-25 04:23:52 -06:00
Scott Lahteine
e0d487e339 Update TMC2208 config store 2017-12-25 04:08:39 -06:00
Scott Lahteine
defff1e4a8 Fix GT2560 A+ servo pins 2017-12-25 02:20:13 -06:00
Scott Lahteine
05a6d48753 Tweak to M125 code 2017-12-25 01:33:46 -06:00
silentninja1
b12eb33feb Add support for pause and resume action commands on M600 2017-12-25 01:28:17 -06:00
Scott Lahteine
00749d8ef0 Add pause/resume action to example configs 2017-12-25 01:28:16 -06:00
Thomas Moore
59d047c1d7 [1.1.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8864) 
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
 2017-12-24 23:47:05 -06:00
Scott Lahteine
fb6b62a01b Comment return false in motion functions 2017-12-24 22:56:56 -06:00
Scott Lahteine
e47316c9d3 Tweak cleaning buffer / SD finished command 2017-12-24 20:33:58 -06:00
Scott Lahteine
88c0688961 Reduce default jerk. XY by half. Z by 1/4 2017-12-24 19:49:51 -06:00
Scott Lahteine
aa9cad0cc6
Merge pull request #8870 from petrzjunior/bugfix-1.1.x 
[1.1.x][Language] Update Czech for Dec 2017
 2017-12-24 18:48:37 -06:00
Scott Lahteine
0950527437
Fix WELCOME_MSG in PT 
From #8879
 2017-12-24 18:45:16 -06:00
Scott Lahteine
b7306ef07f
Fix WELCOME_MSG in PT 
From #8879
 2017-12-24 18:42:50 -06:00
Petr Zahradník
0fc3fea8df
Update Czech language Dec 2017 2017-12-22 18:33:11 +01:00
Scott Lahteine
b5677907d0 Minor speedup for SCARA scaling 
And cleanup of Delta IK macros...
 2017-12-21 22:39:06 -06:00
Scott Lahteine
6f40d57e14
Merge pull request #8851 from thinkyhead/bf1_more_scara_scaling 
[1.1.x] SCARA Feedrate Scaling for G2/G3 - using HYPOT
 2017-12-21 21:35:19 -06:00
Scott Lahteine
fdd85a529a Feedrate scaling for G2/G3 2017-12-20 19:33:16 -06:00
Scott Lahteine
477e36afab Revert "[bugfix-1.1.x] COREXY stutter moves (planner.cpp changes) (#8697)" 
This reverts commit 86b65e52c4.
 2017-12-20 15:59:56 -06:00
Scott Lahteine
1068798465 Restore position_float to LIN_ADVANCE 2017-12-20 06:58:42 -06:00
Scott Lahteine
4f375cd17d Match sign for filwidth across vars 2017-12-20 00:17:32 -06:00
Thomas Moore
98159c0507 [1.1.x][PlatformIO] Stop compiling after first five errors (#8828) 2017-12-19 23:59:19 -06:00
Scott Lahteine
ea345b1db7
Merge pull request #8738 from lumbric/bugfix-1.1.x 
Add missing CPP files to Make file, fixes #8731
 2017-12-19 23:46:23 -06:00
Scott Lahteine
ab7f1a0608 A single setting to validate filament width 2017-12-19 21:34:30 -06:00
Scott Lahteine
3929deed10 Add VOLUMETRIC capability item 2017-12-19 20:33:57 -06:00
Scott Lahteine
435981056e Option to disable all volumetric extrusion 2017-12-19 20:33:41 -06:00
Scott Lahteine
e6f46f3832 Add NO_VOLUMETRICS to example configs 2017-12-19 20:32:40 -06:00
Scott Lahteine
1aea024589 Remove redundant serial sanity check 2017-12-19 19:07:20 -06:00
Scott Lahteine
ce6a691999 Fix #8839 - filament width sensor 2017-12-19 18:24:56 -06:00
Scott Lahteine
10d73155b0 Hide LEVELING item for probeless w/out LCD Leveling 2017-12-17 21:24:46 -06:00
Scott Lahteine
4b1b02a17d Cleanup M503 output for M420 2017-12-17 21:24:46 -06:00
Scott Lahteine
56d355f8de Revert "[Bugfix-1.1.x] initial step correction (#8735)" 
This reverts commit ec028bf747.
 2017-12-17 02:04:44 -06:00
Scott Lahteine
f5fc851925 Sanity check parity with 2.0.x 2017-12-17 00:56:44 -06:00
Scott Lahteine
7378905053 Add MKS_12864OLED_SSD1306 to example configs 
Followup to #8813
 2017-12-16 19:58:34 -06:00
Dan Delaney
df8420aa62 Adding support for using the MKS_12864OLED with the SSD1306 controller 2017-12-16 17:44:34 -06:00
lumbric
3a511e4583 Add all CPP files to Makefile automatically 
Fixes build errors occurring when AUTO_BED_LEVELING_UBL is enabled.
 2017-12-16 20:29:47 +01:00
Dan Delaney
5249765508 Adding support for the Tronxy and Zonestar LCD 
Code borrowed and modified from erikkallen/Marlin_tronxy.
Changed the ANET_KEYPAD_LCD to zonestar, since it is the same device.
I kept a define for ANET_KEYPAD_LCD to enable ZONESTAR_LCD.
 2017-12-15 19:13:31 -06:00
Scott Lahteine
fdf83f1416 Apply ZONESTAR_LCD to example configs 2017-12-15 19:13:31 -06:00
Scott Lahteine
e1b998e40a More externs and functions in Marlin.h 2017-12-15 18:18:26 -06:00
Scott Lahteine
9a4af6bd7c Add NANODLP_ALL_AXIS to config examples 2017-12-15 16:05:29 -06:00
robpower
59265034ae Extended NanoDLP_Z_Move_Sync feature to G4 and G28, Added optional move_sync for all axis. 2017-12-15 16:05:29 -06:00
teemuatlut
0ac0324af2 [1.1.x] TMC driver update (#8712) 2017-12-15 15:02:39 -06:00
Scott Lahteine
f38f2ace5a
Correct unskew, after all 2017-12-15 14:23:20 -06:00
Dave Johnson
817eb5a5ba Missing HAS_HEAT_BED conditional 
Fixes issue found in #8779
 2017-12-15 11:36:36 -08:00
Scott Lahteine
f36f91dfb5 Reduce code with no heated bed 2017-12-13 17:59:17 -06:00
Scott Lahteine
172ea8c71c General code/bitmaps cleanup 2017-12-13 17:57:54 -06:00
Scott Lahteine
da9748fb21 Fix Planner::unskew parity with skew 2017-12-13 17:43:07 -06:00
Scott Lahteine
8519451161 Comment, improve filament width sensor 2017-12-13 02:35:23 -06:00
Scott Lahteine
7c1adff8ad Separate Dual X un-park from movement 2017-12-11 03:12:59 -06:00
Scott Lahteine
eca1509cb2 Skew should apply per-segment 
Segmented moves can account for skew points off the edge, while long regular cartesian moves may be off if the skewed destination point is outside movement bounds.

Followup to #8729
 2017-12-11 03:12:59 -06:00
Scott Lahteine
bdf69db0a8 Extend Skew Correction to UBL 2017-12-11 01:31:14 -06:00
Scott Lahteine
5cce532a29 One or the other? 2017-12-11 00:20:29 -06:00
Scott Lahteine
a20eacaa48 UBL devel debugging flag 2017-12-11 00:20:29 -06:00
Scott Lahteine
4f042533a5 Fix DUAL_X_CARRIAGE with UBL segmented 2017-12-11 00:20:29 -06:00
Scott Lahteine
6e8da93c42 UBL_DELTA => UBL_SEGMENTED 2017-12-11 00:20:29 -06:00
Scott Lahteine
bb33a26e62 Apply const to axis args 2017-12-11 00:20:29 -06:00
Scott Lahteine
da2eaa6b09 Use array refs where possible 2017-12-11 00:20:29 -06:00
Scott Lahteine
8244284116 _buffer_line => buffer_segment 2017-12-11 00:20:28 -06:00
Scott Lahteine
08d9aeff41 Update current position in M852 2017-12-10 23:05:34 -06:00
Scott Lahteine
aa1b4eded6 Have M420 report a changed position 2017-12-10 23:05:34 -06:00
Scott Lahteine
684692091e Sync and report changed position 2017-12-10 23:05:34 -06:00
Scott Lahteine
ccca1ade2d Always report position on config load/reset 2017-12-10 23:05:33 -06:00
Scott Lahteine
dc9e469c4c Tweak M114 detail 2017-12-10 19:15:37 -06:00
Bob-the-Kuhn
ec028bf747 [Bugfix-1.1.x] initial step correction (#8735) 
* tested

* forgot one item
 2017-12-09 18:20:25 -06:00
Scott Lahteine
009920f393 Followup to #8713 2017-12-09 08:06:22 -06:00
Scott Lahteine
666d95285b Mention that segments interpolate more 2017-12-09 06:18:41 -06:00
jkur
f4c31565bc Board definition and PIN assignments for Mini RAMBo1.0a 2017-12-08 23:41:34 -06:00
Scott Lahteine
cf0604da07 Use MB() for Megatronics 3.1 2017-12-08 23:39:47 -06:00
Scott Lahteine
55acb65e27 Updates for stepper parity with 2.0.x 
Matching changes from #8725
 2017-12-08 23:07:52 -06:00
Scott Lahteine
77519e9f14 Tweaks to planner.h 2017-12-08 21:11:17 -06:00
AnHardt
22baf3356a Apply @AnHardt reverse_pass changes 
Plus: 3 times 2 float / to 1 float / and 2 float *
      and, reciprocal is an optimized operation
 2017-12-08 21:11:17 -06:00
Bob-the-Kuhn
360c553228
Merge pull request #8718 from Bob-the-Kuhn/1.1x-planner-speed-improvemenr 
[bugfix-1.1.x] minor planner.cpp speed improvement (follow up to COREXY stutter changes PR #8697)
 2017-12-08 18:40:41 -06:00
Scott Lahteine
b4d69527e6 Followup to #8716 2017-12-08 18:18:06 -06:00
Scott Lahteine
4aba382b01
Merge pull request #8715 from thinkyhead/bf1_followup_8713 
Followup to #8713
 2017-12-08 18:14:57 -06:00
Bob-the-Kuhn
6f38814541 speed improvement 2017-12-08 18:02:57 -06:00
Scott Lahteine
7251850028 Followup to #8713 
Fix indentation, use min for constraint, remove obsolete error check
 2017-12-08 17:52:44 -06:00
Scott Lahteine
6eb268f63f Remove old UBL description text 2017-12-08 17:52:44 -06:00
Jonathan Barchi
ae547c3044 Nozzle.cpp: replace incorrect M_2_PI (2/pi) with 2.0 * M_PI 2017-12-08 15:33:24 -08:00
Roxy-3D
23dd2cb6e7
Better off mesh behavior for UBL (#8713) 
* Better off mesh behaviour for UBL

* Spacing changes...
 2017-12-08 16:36:03 -06:00
Scott Lahteine
8385cddd8d Followup to #8705 2017-12-08 03:48:24 -06:00
Scott Lahteine
75eb93140f Discard all CONTINUED blocks on interrupted move 2017-12-08 02:13:51 -06:00
Scott Lahteine
8be7a0b131 FORCE_INLINE before static 2017-12-08 01:31:59 -06:00
Scott Lahteine
cd6468d6de
Fix TEMP_BED_PIN for Mightyboard Rev.E 
Based on #8685
 2017-12-07 21:52:43 -06:00
Scott Lahteine
822254291f
Merge pull request #8702 from bjarchi/fix-1.1.x-probe_bounds 
Fix - Conditionals_post.h - allow overriding of [min,max] probe point
 2017-12-07 21:49:04 -06:00
Scott Lahteine
44800e9899 PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING 2017-12-07 16:46:06 -06:00
Scott Lahteine
6e85c060a9 Apply MULTIPLE_PROBING to example configs 2017-12-07 16:18:53 -06:00
Jonathan Barchi
7c6d33b0d2 Fix - Conditionals_post.h - allow overriding of [min,max] probe points as expected 2017-12-07 10:40:32 -08:00
Bob-the-Kuhn
86b65e52c4 [bugfix-1.1.x] COREXY stutter moves (planner.cpp changes) (#8697) 2017-12-07 00:08:48 -06:00
Scott Lahteine
6310a00d7e feed_factor => inverse_secs 2017-12-06 23:02:37 -06:00
Scott Lahteine
6b93d20e4e Sanity-check skew+UBL 2017-12-06 22:56:20 -06:00
Scott Lahteine
909fac6d90 Update commentary on M48 2017-12-06 22:50:13 -06:00
Scott Lahteine
1951d3a37a Simplify G26 user_canceled 2017-12-06 22:03:46 -06:00
Scott Lahteine
aa7236e03c Shorten error text in ubl::G29 2017-12-06 21:43:26 -06:00
Scott Lahteine
574153a810 No lcd_map_control needed in quick_stop 2017-12-06 21:43:26 -06:00
Scott Lahteine
3b30cc90f1 Clean on trigger instead of split_first_move flag 2017-12-06 21:43:26 -06:00
Scott Lahteine
1063b3b2b8 Changes for parity with 2.0.x 2017-12-06 21:19:17 -06:00
Scott Lahteine
93560836de Allow buffer clean without release command 2017-12-06 21:12:55 -06:00
Scott Lahteine
ff26b7446c Standardize LCD interface code for UBL a little 2017-12-06 21:12:55 -06:00
Scott Lahteine
7b6ad28a5d General UBL/G26 code cleanup 2017-12-06 21:12:55 -06:00
Scott Lahteine
5d01a2f467 Move temperature reporting to Temperature class 2017-12-06 21:12:55 -06:00
Scott Lahteine
6e197d4a42 Fix M503 S parameter 2017-12-06 21:12:55 -06:00
Scott Lahteine
a5b20fec2f Whitespace clean 2017-12-06 16:19:49 -06:00
AnHardt
b19846aca1 Don't split first_move while homing or probing 
While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.
 2017-12-06 14:56:37 +01:00
Scott Lahteine
d951ba83e6 Show "Level Bed Corners" item with UBL too 
Addressing #8676
 2017-12-05 21:56:04 -06:00
Scott Lahteine
203a445bc1 Minimal include for speed_lookuptable 2017-12-05 21:44:59 -06:00
Scott Lahteine
9edefa645d Remove skew warning that could crash the planner 2017-12-05 20:25:53 -06:00
Scott Lahteine
794f8f1329 Update K1 => PID_K1 2017-12-05 19:59:01 -06:00
revilor
b1f3dfab28 Fix for #8669 (#8677) 2017-12-05 19:40:57 -06:00
Scott Lahteine
2d6c84a817 Cleanup constexpr in planner.cpp 2017-12-05 18:54:25 -06:00
Scott Lahteine
23291a0466 Fix SKEW_CORRECTION without leveling 2017-12-05 18:47:19 -06:00
Scott Lahteine
83a1a70103 Creality pins spacing, MINIPANEL CS pin 2017-12-05 02:00:33 -06:00
Scott Lahteine
47f6fc1e07 Set initial endstops state 
Addressing #8662
 2017-12-05 01:08:39 -06:00
kein0r
f36fdc74ac Added RAMPS v1.4 Plus board 
Conflicts:
	Marlin/boards.h
 2017-12-05 00:43:02 -06:00
Scott Lahteine
ff258d43e7
Merge pull request #8661 from lumbric/bugfix-1.1.x 
Add missing library in Makefile
 2017-12-04 23:50:34 -06:00
Scott Lahteine
d8ef6faa80 Cleanup for dogm_bitmaps 2017-12-04 21:19:59 -06:00
Scott Lahteine
59eb77fd28 One fewer move required… 2017-12-04 20:35:33 -06:00
lumbric (antares)
dde0e9ee0a Add missing library in Makefile 
When using RELOC_WORKAROUND library needs to be linked explicitly, otherwise
eeprom functions are not available.

Thanks to @rfjakob for finding the crucial hint to solve this issue.
 2017-12-05 00:20:58 +01:00
Dave Johnson
860d98a897 [1.1.x] SERIAL_XON_XOFF not supported on USB-native AVR devices (#8653) 
* SERIAL_XON_XOFF not supported on USB-native AVR devices

User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.
 2017-12-04 16:48:19 -06:00
Scott Lahteine
000818f5e4 Split first move to planner for better chaining 2017-12-04 15:43:28 -06:00
Scott Lahteine
298a357a43 Revert "Merge pull request #8608 from thinkyhead/bf1_planner_split_first" 
This reverts commit 0eef0ff0de, reversing
changes made to d8582b7506.
 2017-12-03 17:49:24 -06:00
Scott Lahteine
44d2c5ef88 Fix M49 console hang 2017-12-03 03:36:12 -06:00
Scott Lahteine
1600f7d4ee
Merge pull request #8635 from fiveangle/bf1_report_xonxoff 
[1.1.x] Report SERIAL_XON_XOFF in M115
 2017-12-03 02:19:28 -06:00
Scott Lahteine
71a4c04dd5
Merge pull request #8636 from thinkyhead/bf1_ubl_uses_LSL 
[1.1.x] Use custom segment length for UBL Cartesian
 2017-12-03 01:57:32 -06:00
Scott Lahteine
1d0ee83e18 Split first move to planner for better chaining 
Address #8573, #8595
 2017-12-03 01:44:33 -06:00
Scott Lahteine
db8631e49a Use custom segment length for UBL Cartesian 2017-12-03 00:02:28 -06:00
Unknown
2e295759f2 [1.1.x] Report SERIAL_XON_XOFF in M115 
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
config updates
-Update error checking conditions
 2017-12-02 21:02:02 -08:00
Scott Lahteine
d8582b7506 Bring configurations up to date 2017-12-02 21:42:36 -06:00
dot-bob
7f656b867f Example configuration files for the Wanhao Duplicator 6 for bugfix-1.1.x (#8614) 
* Add default configuration files for the Wanhao Duplicator 6.

* Update Configuration.h
 2017-12-02 21:31:14 -06:00
Scott Lahteine
077fed1d88 Fix a homing comment 2017-12-02 20:57:35 -06:00
Scott Lahteine
152c5d2616 Followup to #8613 2017-12-02 20:47:33 -06:00
Scott Lahteine
26c5bbc5a7 Rename inverse_mm_s => inverse_secs 2017-12-02 20:13:31 -06:00
Jonathan Barchi
344e6b857a configuration_store.cpp: Fix in MarlinSettings::load for updated size of DELTA variables (#8630) 2017-12-02 19:04:52 -06:00
Roxy-3D
81e52138cc
More corrections for Bi-Linear to work with G26 2017-12-02 14:13:19 -06:00
Roxy-3D
a27a9b63e4
Get Bi_Linear macros correct to work with G26 
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
 2017-12-02 14:04:41 -06:00
Scott Lahteine
8b7c274db5 Comment/cleanup motion code 2017-12-02 01:42:37 -06:00
Scott Lahteine
7bed539fdb Fix missing return values in G33_auto_tune 2017-12-02 01:06:14 -06:00
Scott Lahteine
172ce67344 New feature: BED_SKEW_CORRECTION 2017-12-01 19:43:32 -06:00
Scott Lahteine
a8d83aec89 Add SKEW_CORRECTION to example configs 2017-12-01 19:43:31 -06:00
Scott Lahteine
38e5883d44 Apply const to thermal_runaway_protection args 2017-12-01 19:43:31 -06:00
Scott Lahteine
e7c6abd767 Update V45 Settings header 2017-11-30 22:26:21 -06:00
Roxy-3D
9f7405b3f0
Restore correct gMax 1.5+ G26 values 2017-11-30 18:11:01 -06:00
Scott Lahteine
d3f8111fe7 Use some int types in Planner 2017-11-30 18:03:51 -06:00
Scott Lahteine
d1a807fdf8 Drop obsolete Planner::position_float 2017-11-30 17:28:40 -06:00
Scott Lahteine
8df42a84a4 Fix fade bug in (un)apply_leveling 2017-11-30 17:28:40 -06:00
Scott Lahteine
8f462b5717 Add Planner::set_filament_size for 2.0.x parity 2017-11-30 16:52:19 -06:00
Scott Lahteine
68c1f05aeb Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
Scott Lahteine
1f770bb103 Config updates, spacing mainly 2017-11-29 20:57:38 -06:00
Tannoo
e25567a5dd New feature: LED_CONTROL_MENU 2017-11-29 20:57:38 -06:00
Scott Lahteine
9951f28892 Apply const to some planner vars 2017-11-29 20:57:38 -06:00
Scott Lahteine
80929c2637 Apply SEGMENT_LEVELED_MOVES to example configs 2017-11-29 16:58:16 -06:00
Scott Lahteine
d786fb99e2 Add an option to segment leveled moves 2017-11-29 16:58:15 -06:00
Scott Lahteine
a0fc5f7b52 Minor planner.cpp style changes 2017-11-29 15:00:33 -06:00
Scott Lahteine
ea87cd975d Tweak to check_axes_activity 2017-11-28 18:39:29 -06:00
Scott Lahteine
fd50f452ff Whitespace cleanup 2017-11-28 17:49:25 -06:00
Scott Lahteine
6eedb64777
Merge pull request #8586 from AnHardt/1_Fix_WDTO_during_long_DELTA_moves 
[1.1.x] Fix WDTO during long delta moves
 2017-11-28 17:27:08 -06:00
Scott Lahteine
46776de90b Fix M290 boolval bug 
Fix #8577
 2017-11-28 17:25:14 -06:00
Scott Lahteine
dfcef11bca Fix #8579 
Fan speed code fell into a curly brace
 2017-11-28 16:09:37 -06:00
AnHardt
f1757f30cb Fix Watchdog time out during long lasting DELTA moves 
During long lasting moves of a delta machine neither the temperatures are maintained nor buttons checked nor ... .
The fix is to call 'manage_heater()' and 'idle()' every now and then in the loop where the move is segmented. 
The code is abot the same as in G2_G3 wher we had the same problem with too large circles lasting too long.
Fixing #7510
 2017-11-28 17:10:18 +01:00
Scott Lahteine
ddab1533c5 Simplify midpos calculation 2017-11-27 14:01:42 -06:00
Scott Lahteine
915c4b9ce2 Make MBL work more like PROBE_MANUALLY 2017-11-27 00:09:23 -06:00
Scott Lahteine
d7cc26cc17 Allow override of probe bounds in configs 2017-11-26 20:57:00 -06:00
Scott Lahteine
5bc5ba7ee3 More reliable set characters after bootscreen 2017-11-26 20:02:51 -06:00
Scott Lahteine
82df656cc7 Tweak readDir code 2017-11-26 18:23:34 -06:00
Scott Lahteine
51d09bb9c9 Tweak BLOCK_BUFFER_SIZE config 2017-11-26 17:33:33 -06:00
Scott Lahteine
5a1f1305f0 SD Menu patches 2017-11-26 01:10:06 -06:00
Scott Lahteine
3cf31205bc Tweaks to bed leveling menus 2017-11-26 00:06:10 -06:00
Scott Lahteine
26a40373fc Adjustments to blocking moves 2017-11-25 23:32:53 -06:00
Scott Lahteine
6b9e7defac M211 output in current workspace 2017-11-25 20:47:36 -06:00
Scott Lahteine
a63d9cc550 Loosen HAS_BED_PROBE definition 2017-11-25 20:10:03 -06:00
Scott Lahteine
1e84cded98 Parity with 2.0.x bitmap functions 
Based on #8565
 2017-11-25 19:56:22 -06:00
Scott Lahteine
bb0cc1bbbc Fix gcode_G26 error return 2017-11-25 19:51:03 -06:00
Scott Lahteine
941ffea81c Fix Micromake C1 config 2017-11-25 18:42:42 -06:00
Scott Lahteine
737cee4b8c Syntax tweaks 2017-11-25 18:15:16 -06:00
Scott Lahteine
d3165cca4f Move BABYSTEP_ZPROBE_GFX_OVERLAY up 2017-11-25 17:28:12 -06:00
Scott Lahteine
2060ba3556 M290 report on change, P0 to leave Probe Z Offset unchanged 2017-11-25 16:51:00 -06:00
Scott Lahteine
e56ead5e1c Followup to G33 patch 2017-11-25 16:01:55 -06:00
LVD-AC
8b9e68c32d [1.1.x] G33 probe error handing 2017-11-25 15:44:30 -06:00
Scott Lahteine
b2d3fffe74 Patches for M290, M851 2017-11-25 14:10:49 -06:00
Scott Lahteine
b5c5b175f1 Dont use Z_MIN_PROBE_ENDSTOP for DELTA 2017-11-24 18:28:27 -06:00
Thomas Moore
ecf19344f6 Initialize mixing virtual tools to behave like standard a multi-extruder setup (#6853) 
* Initialize mixing virtual tools to behave like standard a multi-extruder setup

* Update Marlin_main.cpp

* Update Marlin_main.cpp
 2017-11-24 18:06:32 -06:00
Scott Lahteine
b2473e57dd Apply LINEAR_UNIT to M503 output for M200 2017-11-24 17:31:00 -06:00
Scott Lahteine
d38aaa0c7e
Merge pull request #8550 from thinkyhead/bf1_fix_probe_pt 
Fix #8540
 2017-11-24 17:15:05 -06:00
Scott Lahteine
adee17847c Fix #8540 
Does it?
 2017-11-24 17:05:42 -06:00
oliver
a7d82bd73b MK2_MULTIPLEXER does not require E2/E3 stepper pins 2017-11-24 23:58:37 +01:00
Scott Lahteine
59a699063a Fix #8537 2017-11-24 15:54:03 -06:00
Scott Lahteine
ff800e08fd Phatter arrows for Z offset overlay 2017-11-24 15:54:03 -06:00
Scott Lahteine
c0190eff00 Adapt MESH_EDIT_GFX_OVERLAY for 1.1.x 2017-11-24 15:54:02 -06:00
Scott Lahteine
4e445f2c55 Keep Micromake C1 name on LCD? 2017-11-24 13:18:34 -06:00
Scott Lahteine
9da817eae0 Make LCD_LANGUAGE consistent in all configs 2017-11-24 13:18:34 -06:00
Scott Lahteine
7cf4009838 Fix MK2_MULTIPLEXER stepper indirection 
Addressing #8544
 2017-11-24 12:47:10 -06:00
Rob Power
f8e30f49d7 Add NanoDLP Z movement synchronization option 
Implemented synchronization message output for NanoDLP printers (nanodlp.com).
If optional feature is enabled in `Configuration_adv.h`, Marlin will ouput "Z_move_comp" string to serial after completing any G0/G1 Z-axis movements. This feature patched on previous versions(1.0) is used by NanoDLP to synchronize Z-axis movement with projector exposure in DLP stereolithography printers.
 2017-11-24 00:32:03 -06:00
Scott Lahteine
3b431f2f72 Arrange G26 functions in dependency order 2017-11-23 22:30:22 -06:00
Scott Lahteine
e5b43d48ee Apply G26 for meshes to all configs 2017-11-23 21:41:27 -06:00
Roxy-3D
8282d732c1 Make G26 work with all mesh leveling. 
Example Configuration.h files are not updated yet.   You need to cross
your settings over to the default Configuration.h file in the \Marlin
directory.   (UBL_G26_MESH_VALIDATION enablement has moved to a new
location in the file.)
 2017-11-23 21:41:27 -06:00
Scott Lahteine
82f41d6e46 fix fan kickstart 2017-11-23 21:40:31 -06:00
Scott Lahteine
b8c65078fc NEOPIXEL_RGBW_LED => NEOPIXEL_LED 2017-11-23 16:41:04 -06:00
Scott Lahteine
04419af419 Reorganize check_axes_activity 2017-11-23 15:29:35 -06:00
Scott Lahteine
ed6a5ff7e5
Merge pull request #8524 from GMagician/1.1.x-tool-change-bad-behaviour-fix 
[1.1.x] Tool change bad behaviour fix
 2017-11-22 20:23:02 -06:00
Scott Lahteine
956680104b Tweak char_mode init 2017-11-22 19:10:54 -06:00
Scott Lahteine
99b71c1dde Move lcd_map_control to UBL 
For parity with bugfix-2.0.x
 2017-11-22 18:45:55 -06:00
Scott Lahteine
73ddc762c8 Fix up LCD init / charset 2017-11-22 18:07:03 -06:00
GMagician
7a5b3a1e6a [1.1.x] Tool change bad behaviour fix 
Just aligned with version 2.0. Here bug was not present
 2017-11-22 23:51:07 +01:00
Scott Lahteine
e2568d7589 Fix delta_safe_distance_from_top 2017-11-22 14:11:04 -06:00
Scott Lahteine
0b1d754e7d Fix G42 2017-11-22 14:11:04 -06:00
Scott Lahteine
bbc2ee6da1
Don't re-init graphical LCD after boot screen 
Followup to 13a3fb1acc
 2017-11-21 18:21:50 -06:00
GMagician
b96ceb4256 [1.1.x] tool change bad behaviours 
This PR will address two issues reported in #8492. Just one is left because I don't know if it is an issue or not

1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
2) Since no move no bed level matrix should be applied
    When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
 2017-11-20 16:39:32 -06:00
Scott Lahteine
b6dbc4c5c1
Merge pull request #8426 from SteveGotthardt/bugfixes 
[1.1.x]Update Anet A8 default values from my Anet A8 experience
 2017-11-20 15:12:46 -06:00
Bob-the-Kuhn
12b018e619
Merge pull request #8487 from Bob-the-Kuhn/M43-compatibility-1.1.x 
[1.1.x] M43 end pin correction/compatibility
 2017-11-19 11:01:10 -06:00
Bob-the-Kuhn
9b80e1e04a change to L for end pin for M43 Toggle command 2017-11-18 13:48:53 -06:00
Scott Lahteine
bf6a1816b4 Display volumetric ratio in terms of E mm 2017-11-18 07:03:18 -06:00
Scott Lahteine
4f05a66ee1 Fixes #8472 2017-11-18 05:14:31 -06:00
Scott Lahteine
622d100c30 No retroactive changes with M851 Z 2017-11-18 03:37:07 -06:00
Scott Lahteine
74997a5251 Fix comment in planner.h 2017-11-18 02:30:41 -06:00
Roxy-3D
50148f7185
Update the UBL Probable Area for Delta's 
This is a non-intuitive change.   @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits.   This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
 2017-11-17 16:41:31 -06:00
Scott Lahteine
8f57a3e28a Apply coding standards to Max7219 code 2017-11-17 15:33:55 -06:00
Scott Lahteine
2511e869e2
Update Configuration.h 2017-11-16 23:18:55 -06:00
Scott Lahteine
aa612124f2
Merge pull request #8452 from tcm0116/1.1.x-pio_deps 
[1.1.x] Fix PlatformIO dependencies
 2017-11-16 22:54:15 -06:00
Scott Lahteine
eb3bdb7550 Fix FILAMENT_LCD_DISPLAY, disabled state, optimize 2017-11-16 17:46:08 -06:00
Thomas Moore
97c19de8b9 Fix PlatformIO dependencies 2017-11-16 15:16:21 -06:00
Scott Lahteine
4e19c59ab3 Miscellaneous cleanup 2017-11-16 01:18:05 -06:00
Scott Lahteine
9cf5b96971 Fix M503 output for M145 
Fixes #7978
 2017-11-15 04:00:39 -06:00
Scott Lahteine
69a710fef1 Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
Scott Lahteine
d2613ce077
Merge pull request #8432 from thinkyhead/bf1_fix_M32_subroutines 
[1.1] Fix 'M32 P' subroutines
 2017-11-15 02:31:21 -06:00
Scott Lahteine
f2e222b9e8
Merge pull request #8419 from RowanMeara/rm-dithering-1.1.x 
[1.1.x] Fix Software Fan PWM
 2017-11-15 02:29:59 -06:00
Scott Lahteine
a6ee4a0468 Apply SDCARD_SORT_ALPHA changes from 2.0.x 2017-11-15 01:09:13 -06:00
Scott Lahteine
d3b8f30818 Fix M32 P subroutine handling 2017-11-15 01:09:06 -06:00
Scott Lahteine
2390f6d3ab Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
Scott Lahteine
eacb6b6e8b Fix parser value handling 2017-11-14 23:23:22 -06:00
Steven Gotthardt
7efffc1548 Update Anet A8 default values from my Anet A8 experience 2017-11-14 10:47:30 -07:00
RowanMeara
10e366ebd7 Change dithering behavior to intended. 2017-11-14 00:36:35 -08:00
Scott Lahteine
95590adf07 Make sure leveled[] is enabled for use 2017-11-14 02:12:20 -06:00
Scott Lahteine
8d06cf7b84 Add M114_DETAIL to Configuration_adv.h 2017-11-14 00:06:35 -06:00
Steven Gotthardt
645b586041 Fix warnings for REPRAPWORLD_KEYPAD 2017-11-13 22:25:17 -06:00
Scott Lahteine
069ec3f9a9 Move Filament Width Sensor to Configuration_adv.h 2017-11-13 21:06:40 -06:00
Scott Lahteine
56035e9965 Move mesh test options under G26 option 2017-11-13 21:06:40 -06:00
Scott Lahteine
d65c99f38b Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
Scott Lahteine
90c7d28055 Extrudrboard support for Printrboard Rev.F 2017-11-13 15:47:03 -06:00
Scott Lahteine
8b684637bc
Merge pull request #8397 from RowanMeara/rm-M428-1.1.x 
[1.1.x] Fix M428
 2017-11-13 15:11:36 -06:00
Rowan Meara
d2df00bfca [1.1.x] Fix compilation warnings (#8395) 
* Fix up Travis CI and compile warnings/errors

* No ULTRA_LCD with REPRAP_DISCOUNT_SMART_CONTROLLER

* No point in setting all the endstop plugs
 2017-11-13 04:18:19 -06:00
Scott Lahteine
25ec0fecfa Apply native workspace fixes to G92, G53-59 2017-11-13 01:53:44 -06:00
RowanMeara
227b96b28b Fix M428 
This fixes the old implementation of M428 which was broken, did not
match the website, and made no sense.
 2017-11-13 01:34:43 -06:00
Scott Lahteine
a2c013c8c7 Fix LCD pins for Printrboard v1 2017-11-13 00:10:27 -06:00
Scott Lahteine
f27196214b Fix Printrboard pins for parity with 2.0 2017-11-13 00:03:11 -06:00
Scott Lahteine
aa616cd410 No leveling data in M114 without leveling 2017-11-12 23:06:16 -06:00
Scott Lahteine
5926159890 Fix report_current_position 
Thanks @RowanMeara!
 2017-11-12 22:57:57 -06:00
Roxy-3D
c9f88297b8
Provide more clearance for BL-Touch probe 2017-11-12 13:09:10 -06:00
Scott Lahteine
5cc87abb3a
Merge pull request #8381 from thinkyhead/bf1_native_followup 
[1.1] Remove offsets from soft endstops, tool change
 2017-11-11 23:13:40 -06:00
Scott Lahteine
355dfed437 Coding standard patch of M290 2017-11-11 22:16:13 -06:00
Scott Lahteine
802ae73b13 Turn off laser power pin when PWM goes to 0 2017-11-11 22:02:19 -06:00
Scott Lahteine
549c814e8d Remove offsets from soft endstops, tool change 2017-11-11 21:28:32 -06:00
Scott Lahteine
564fbc8dec M290 constrain patch 2017-11-11 20:50:16 -06:00
Scott Lahteine
df44bcc5ae Use do_blocking_move_to where possible 2017-11-10 20:37:41 -06:00
Scott Lahteine
3293823642 Add pre-calculated planner.e_factor 2017-11-10 20:09:59 -06:00
Scott Lahteine
24b302c001 Fix cold/lengthy extrusion handling 2017-11-10 20:09:59 -06:00
Thomas Moore
4714fb8fcb Normalize load/unload length in M600 2017-11-10 19:59:26 -06:00
Scott Lahteine
b0ff3a4c6d Cleanup around updatePID 2017-11-10 19:17:46 -06:00
Scott Lahteine
7aadfe32e7 Prevent position_is_reachable disaster 2017-11-10 19:17:45 -06:00
LVD-AC
8ce9306b27 PROBE_SELECTED etc. 2017-11-10 19:17:45 -06:00
Scott Lahteine
80682ec61e Updates Traditional Chinese, rebase for bugfix-1.1.x 2017-11-10 04:49:09 -06:00
Scott Lahteine
deaa70c2cc Update macros for parity with 2.0.x 2017-11-10 04:32:27 -06:00
Scott Lahteine
7535c21894 Remove some trailing white-space 2017-11-10 03:38:58 -06:00
Roxy-3D
8327667988
Correct gMax 1.5+ nozzle size to the right number 
Also...   Doing a 'Direct Commit' to see if that is 'acceptable' for small changes like this.   I want to look at the commit history and see how the logs handle this type of change.
 2017-11-09 20:00:55 -06:00
Scott Lahteine
b6b4bf0959
Merge pull request #8345 from tcm0116/1.1.x-delta_height 
[1.1.x] Add delta_height variable in lieu of using home_offset
 2017-11-09 01:19:48 -06:00
Thomas Moore
658e1ebe5a Add delta_height variable in lieu of using home_offset 2017-11-08 23:21:02 -06:00
Scott Lahteine
54963cc898 Fix _manual_goto_xy on kinematic systems 2017-11-08 23:18:55 -06:00
Scott Lahteine
ad879a1f90 Clarify some motion code 2017-11-08 23:18:55 -06:00
Scott Lahteine
513f25d42c Remove redundant dual stepper driver entries 2017-11-08 20:26:54 -06:00
Scott Lahteine
2559745f54 Tweaks to core motion code 2017-11-08 20:08:20 -06:00
Scott Lahteine
7326fe1136
Fix tilt_mesh_based_on_probed_grid output bug 2017-11-08 20:07:02 -06:00
Scott Lahteine
97a43f0c2f
Fix G26 Y position argument 2017-11-08 19:19:21 -06:00
Scott Lahteine
87b655e59e Fix gcode_get_destination E axis 2017-11-08 12:50:40 -06:00
Roxy-3D
677d490b5c
Add defaults for basic extrusion to Configuration.h files (#8331) 2017-11-08 11:02:47 -06:00
Roxy-3D
6ee4ba6932
We need motion even with !HAS_MESH (#8330) 
Thank You MagoKimbra !
 2017-11-08 09:58:18 -06:00
Scott Lahteine
4a857f1af6 Followup to G33/LCD patch #8318 2017-11-08 00:46:30 -06:00
Scott Lahteine
1d0739d6d1 Patch G33 misuse of PROBE_MANUALLY 2017-11-07 22:28:54 -06:00
Scott Lahteine
69a7d4e0a5 Conditionals updates from #7979 2017-11-07 21:20:38 -06:00
Scott Lahteine
5fe15c7f10 Patch abuse of sprintf_P in G33 2017-11-07 17:35:32 -06:00
Rowan Meara
094bebcc2d [1.1.x] Update Thermal Protection Documentation (#8282) 
* Fix thermal protection documentation.

Even before the recent thermal protection changes, the documentation of
the thermal protection feature in the config files did not match the
implementation.  I fixed the documentation and reconciled the M303
implementation with the documentation.

* Applied documentation changes to sample config files

* Renamed hysteresis to watch_temp_increase

* Added gcodes back into documentation.
 2017-11-07 15:52:28 -06:00
Scott Lahteine
abb15bc30a Followup patch for G92 2017-11-07 13:08:38 -06:00
Scott Lahteine
8e18e05d1d
Merge pull request #8309 from thinkyhead/bf1_fixes_for_117 
[1.1] Fix G92 for native workspace
 2017-11-07 12:52:55 -06:00
Scott Lahteine
aa80882bdf
Merge pull request #8306 from Kaibob2/patch-4 
Length fix and translation
 2017-11-07 12:27:37 -06:00
Scott Lahteine
e4466b55b5 Fix G92 for native workspace 2017-11-07 12:27:05 -06:00
Kai
b60efb4230
Length fix and translation 
If #define MSG_Z_FADE_HEIGHT is xx.xx then the last character is crashing into the value
 2017-11-07 18:16:30 +01:00
Thomas Moore
2f4a42b313 Fix Delta EEPROM 2017-11-07 16:55:06 +00:00
Scott Lahteine
e1ab285435 Fix some section sizes in EEPROM head comment 2017-11-06 22:41:27 -06:00
Scott Lahteine
26ebeadfaa Eliminate some compiler warnings 2017-11-06 22:41:27 -06:00
Scott Lahteine
30e4b85587 Fix M118 parameters, with strict guideline 2017-11-06 22:41:27 -06:00
Scott Lahteine
44edffa0a9 Fix SLOW_PWM_HEATERS, issues already patched in 2.0.x 2017-11-06 22:40:44 -06:00
Scott Lahteine
ddf5d68815 Fix non-extended font option 2017-11-06 21:43:18 -06:00
Scott Lahteine
298863c2d0
Tweak an EEPROM loop 2017-11-06 20:16:57 -06:00
Rowan Meara
8e8787ad63 Fixed EEPROM CRC (#8283) 
Fix EEPROM reversion.
 2017-11-06 19:18:42 -06:00
Roxy-3D
12151e62ee
Fix G26's circle drawing... (#8291) 
* Fix G26's circle drawing...

This mostly catches the bugfix-v1.1.x branch up to bugfix-v2.0.0

I'll have to do something similar to get bugfix-v2.0.0 caught up to
bugfix-v1.1.x

* only use planner.leveling_active if appropriate
 2017-11-06 18:26:47 -06:00
Scott Lahteine
efc1029226
Update bilinear for native workspace 2017-11-06 17:03:34 -06:00
Scott Lahteine
1b09733e7c Fix FWRETRACT un-hop 2017-11-05 18:33:10 -06:00
Scott Lahteine
d8ef9bda18
Fix point_t pointer in Nozzle::zigzag 2017-11-05 18:32:32 -06:00
Scott Lahteine
267c247da7 Cleanup Nozzle class, fix XY vs Z move order 2017-11-05 18:14:18 -06:00
Scott Lahteine
8ab368559a Implement CNC_COORDINATE_SYSTEMS 2017-11-04 22:30:23 -05:00
Scott Lahteine
bb111b928b Add CNC_COORDINATE_SYSTEMS to configs 2017-11-04 22:30:23 -05:00
Scott Lahteine
91abf07087 Cleanup and fix G33 2017-11-04 22:30:23 -05:00
Scott Lahteine
e642a64b68 Prettify some EEPROM code 2017-11-04 22:00:45 -05:00
Scott Lahteine
64f077fd2a Remove I2CPEM workspace offset 2017-11-04 22:00:45 -05:00
Scott Lahteine
5fefa200ba Tweaks to cubic_b_sline code style 2017-11-04 22:00:45 -05:00
Kris Kersey
46c2841904 Added support for Anet LCD on Ramps board. 
Working pin map for Anet LCD display.
Pins 1 and 2 must be swapped on cable.
 2017-11-04 21:30:08 -05:00
Scott Lahteine
f9f0ee0f21 Update G2/G3 Workspace Planes 2017-11-04 14:35:25 -05:00
Scott Lahteine
640526f0c8 Operate in Native Machine Space 2017-11-03 22:40:30 -05:00
Scott Lahteine
9af9596f69
Merge pull request #8241 from machaj/fix-links-to-probes 
Fix probes configuration url
 2017-11-03 13:36:20 -05:00
Jan Macháček
0c4e9980fb Fix probes configuration url 2017-11-03 14:42:02 +01:00
AnHardt
13a3fb1acc Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()' 
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
 2017-11-03 12:16:42 +01:00
Scott Lahteine
343dd1c0b8 Remove G33 trailing whitespace 2017-11-03 04:06:38 -05:00
Scott Lahteine
64029ef8a6
Merge pull request #8179 from thinkyhead/bf1_config_tweak 
[1.1.x] Faster menu navigation for Anet A8
 2017-11-03 03:59:21 -05:00
Scott Lahteine
524f4ee0cf Tweak to M330 thermal protection 2017-11-03 03:57:11 -05:00
Scott Lahteine
34aeaec553 Remove ADKey steps acceleration 2017-11-03 03:42:52 -05:00
Luc Van Daele
0e4b6b373d [1.1.x] G33 magic numbers (#8173) 
* [1.1.x] G33 magic numbers

* oops

* comments

* oops

* warning

* better comment section

* remarks

* extra grids
 2017-11-03 03:35:53 -05:00
Scott Lahteine
193a0e9273
pid_autotune parity with 2.0.x 2017-11-03 03:26:47 -05:00
Rowan Meara
39cc36d3f1 [1.1.x] M303 thermal runaway protection (#8209) 
* Added M303 thermal runaway protection

Currently, thermal runaway protection is not available during M303.
Therefore, if someone plugs the thermistors in incorrectly and goes to
autotune their printer, the printer temperature could runaway and damage
could occur.

* Replace removed line, clarifying its logic
 2017-11-03 03:16:39 -05:00
Scott Lahteine
87d3a1ae4d
Merge pull request #8228 from tcm0116/1.0.x-dual_stepper 
[1.1.x] Fix automatic stepper assignment for X/Y/Z dual stepper drivers
 2017-11-03 03:08:43 -05:00
AnHardt
dcd7949544 Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR 2017-11-03 04:45:13 +01:00
Thomas Moore
277eb16d67 Fix automatic stepper assignment for X/Y/Z dual stepper drivers 2017-11-02 18:50:25 -05:00
jmdearras
c9980c0a5c Restore MKS_GEN_L 
Removed by accident, I presume, when the file was cleaned up
 2017-11-02 12:14:54 -04:00
jmdearras
3e9504d306 Fix case light "off" function (#8205) 
* Fix case light "off" function

It would only turn the light off if brightness was 255

* Update Marlin_main.cpp
 2017-11-01 21:17:23 -05:00
Scott Lahteine
4bf0e15653 Allow asterisks in G-Code commands 
Addressing #6655
 2017-10-31 21:14:56 -05:00
Scott Lahteine
f02ca2a9a3 Organize boards.h by architecture 2017-10-31 16:12:07 -05:00
Scott Lahteine
4fb3ce4739 Support for SilverGate Board 2017-10-31 15:26:27 -05:00
Scott Lahteine
704640bf98 Faster menu navigation for Anet A8 
Addressing #8166
 2017-10-31 14:44:48 -05:00
Scott Lahteine
db6de76acb Only show custom bootscreen once 2017-10-31 01:52:35 -05:00
GMagician
15be1cb9a9 [1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour (#8177) 
* [1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour

NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed

* Update Marlin_main.cpp

* Update Marlin_main.cpp

* Update Marlin_main.cpp
 2017-10-30 22:50:50 -05:00
Scott Lahteine
893092ff7f Kinematic clamp_to_software_endstops 2017-10-30 16:24:45 -05:00
Scott Lahteine
8b7c1e9cec Fix for MAX_VFAT_ENTRIES sanity check 2017-10-30 16:24:45 -05:00
Scott Lahteine
393ceb28fc The plural of 'axis' is 'axes' 2017-10-30 14:49:51 -05:00
Scott Lahteine
d9cb7be444
Merge pull request #8160 from thinkyhead/bf1_fixup_sd_reprint 
[1.1.x] Simplify SD_REPRINT_LAST_SELECTED_FILE
 2017-10-29 23:57:44 -05:00
Scott Lahteine
5837f067cf Tweak to QUICK_HOME comment 2017-10-29 23:50:02 -05:00
Scott Lahteine
5e5a177934 No hacks needed for SD_REPRINT_LAST_SELECTED_FILE 2017-10-29 22:44:03 -05:00
Scott Lahteine
0b5b03d9dc Tweak for soft endstops 2017-10-29 20:16:22 -05:00
Scott Lahteine
9288d80613
Merge pull request #8156 from thinkyhead/bf1_anet_10_servo 
[1.1.x] Define a default SERVO0_PIN for Anet 1.0
 2017-10-29 19:53:49 -05:00
Scott Lahteine
6698db29de
Update LCD draw condition 2017-10-29 19:17:32 -05:00
Scott Lahteine
25e86a520d
Merge pull request #8114 from thinkyhead/bf1_print_sd_file_again 
[1.1.x] Cleanup for SD Print Again
 2017-10-29 19:09:34 -05:00
Scott Lahteine
b0e282a74b Cleanups for SD_REPRINT_LAST_SELECTED_FILE 2017-10-29 19:02:17 -05:00
Scott Lahteine
46ed54cd8e Include time scale in some planner vars 2017-10-29 18:48:14 -05:00
Scott Lahteine
9c870baf84 Add a hidden 8s watchdog option for easier debugging 2017-10-29 18:34:57 -05:00
Scott Lahteine
471c2b5d5c Provide a default SERVO0_PIN for Anet 1.0 2017-10-29 18:34:57 -05:00
Scott Lahteine
e792c2b234 Followup to #8123 - to match 2.0.x changes 2017-10-29 05:39:44 -05:00
Scott Lahteine
daa85f71e1
Merge pull request #8123 from thinkyhead/bf1_dual_xyz_endstops 
[1.1.x] Dual endstops XYZ
 2017-10-29 04:36:09 -05:00
Rowan Meara
9850ba0cbd [1.1.x] Fix M303 thermal protection #8103 (#8126) 
* Fixed M303 thermal protection

The temperature sanity checking logic was not being applied during M303
(pid autotuning) because instead of setting a target temperature, it
directly manipulated the pwm values.  When PIDTEMP/PIDTEMPBED is
enabled, PWM values rather than the target temperature determine whether
the heater is on.  I changed this to look directly at the PWM amount
when pid is enabled.

* Turn off heaters on M303 error

Currently, PID autotuning stops if it overshoots the temperature by 20C
or if if the temperature does not change for 20 minutes and it times
out.  I added calls to disable the heaters in these scenarios.

* Removed unnecessary if statement.

Added changes suggested by GMagician.

* Update temperature.cpp

* Update temperature.cpp

* Update temperature.cpp
 2017-10-29 04:34:47 -05:00
Scott Lahteine
318c419f77 Implement support for Dual X and Y endstops 2017-10-29 03:49:45 -05:00
Scott Lahteine
7e1232269a Add Dual Steppers / Endstops to configs 2017-10-29 03:49:45 -05:00
Scott Lahteine
62d52d62dc Cleanup for DIGIPOTS settings 2017-10-29 03:49:32 -05:00
LVD-AC
77cf42588f (1.1.x) serious bug G33 2017-10-29 00:22:55 +02:00
Scott Lahteine
a979c428ee Revert default BABYSTEP_MULTIPLICATOR to 1 2017-10-27 19:42:51 -05:00
jmdearras
6920769a9a Added MKS GEN L board (#8088) 
[1.1.x] Add MKS GEN L board
 2017-10-27 02:13:41 -05:00
Scott Lahteine
410aa0716d Concise SD_REPRINT_LAST_SELECTED_FILE description 2017-10-27 00:10:04 -05:00
Scott Lahteine
445a7f65cd Clean up trailing whitespace 2017-10-27 00:02:35 -05:00
Luc Van Daele
e64cfb13b8 (1.1.x) auto tune calibration parameters (#8031) 
* auto tune calibration parameters

* solve warnings

* Tweaks to formatting

* review Thinkyhead

* Error
 2017-10-26 23:49:20 -05:00
Scott Lahteine
2296d98845 Tweak neopixel self-test 2017-10-26 22:46:11 -05:00
Scott Lahteine
9aac3d8773 Add some Polish translations 
Thanks @SCiunczyk
 2017-10-26 22:44:23 -05:00
Scott Lahteine
6569b9ba56 Fix FWRETRACT logic, apply common sense 2017-10-26 22:36:41 -05:00
Bob-the-Kuhn
7ab9abe4ef Merge pull request #8107 from Bob-the-Kuhn/1.1.x-reduced-font-fix 
(bug fix) 1.1.x - save 1400 bytes of FLASH by using reduced font for some languages
 2017-10-26 16:09:52 -05:00
Bob-the-Kuhn
3357170b18 give this language an unique name 2017-10-26 15:48:00 -05:00
Roxy-3D
2e746f2b8b Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE (#8104) 
* Initial conflict resolution

All previous items resolved:
- Use of ELAPSED() on timer code
- Switch to use of defer_return_to_status=true as much as possible
- Update & Clean Up of Max7219 routines

* Resolve non-SD case in ultralcd.cpp
 2017-10-26 11:44:55 -05:00
Bob-the-Kuhn
594c075377 1.1.x - save 1400 bytes of FLASH by using reduced font for some languages (#8095) 
* use reduced sized font for some languages

* Fit Portuguese language files to existing scheme

* Rename language_pl-DOGM.h to language_pl_utf8.h

* Rename language_pl_utf8.h to language_pl-DOGM.h

* Update dogm_font_data_ISO10646_1.h

* Update dogm_font_data_ISO10646_1.h
 2017-10-25 18:32:38 -05:00
Scott Lahteine
8bb1e91afd More specific M100 description 2017-10-25 16:11:09 -05:00
Scott Lahteine
a12d1b21b5 Merge pull request #8048 from madmo/mks-mini-gt2560 
[1.1.x] Add MKS MINI 12864 support to GT2560
 2017-10-25 01:13:07 -05:00
Scott Lahteine
5bed2f351a Fix spacing, use single instances of similar pins 2017-10-24 19:12:40 -05:00
Scott Lahteine
ec9d7b639d Encourage users to re-examine their configs 2017-10-24 18:33:31 -05:00
Scott Lahteine
1c97c1582c Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h 2017-10-24 18:25:50 -05:00
Scott Lahteine
f06f4b40b8 Apply physical limits to mesh bounds 2017-10-24 16:49:00 -05:00
Scott Lahteine
3235beef6d Merge pull request #8073 from thinkyhead/bf1_fix_M600 
[1.1.x] Fix position sync in M600 pause/resume
 2017-10-24 14:56:01 -05:00
Scott Lahteine
e5ab783b08 Merge pull request #8061 from thinkyhead/bf1_general_cleanup 
[1.1.x] Patch up some verbiage in configs
 2017-10-24 14:44:31 -05:00
Scott Lahteine
355ebec92d Fix position sync in M600 pause/resume 2017-10-24 14:41:54 -05:00
montri2025
fa157f08ff lcd <20 disply Bed Temperature cast ty (#8068) 2017-10-23 23:46:26 -05:00
Scott Lahteine
39a545b3f8 Patch up some verbiage in configs 2017-10-22 17:14:50 -05:00
Roxy-3D
e9bc9a2ab4 change to better (more clear) names (#8049) 
set_destination_to_current() changed to set_destination_from_current()

set_current_to_destination() changed to set_current_from_destination()
 2017-10-21 10:58:17 -05:00
Moritz Bitsch
b22c87183f Add MKS MINI 12864 support for GT2560 2017-10-21 13:05:21 +02:00
tweichselbaumer
fa44130734 Add M290 babystepping (#8014) 
* Add M290 babystepping

* Allow `Z` for `M290`

* fix spacing

* Support BABYSTEP_XY in M290

* Not just Z

* Extend M290 for BABYSTEP_ZPROBE_OFFSET

* tweak
 2017-10-21 03:58:53 -05:00
MetalSearch
9b3f27f02a Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041) 
[1.1.x] Fix EndStops don't work with BOARD_RAMPS_14_EFB on Micromake C1
 2017-10-21 00:24:22 -05:00
Scott Lahteine
a7398a0459 Prevent SDCARD_SORT_ALPHA from exploding 2017-10-20 19:14:11 -05:00
Scott Lahteine
91c5c2538a Add SCROLL_LONG_FILENAMES advanced option 
Based on #7637 by @marcio-ao
 2017-10-20 19:14:10 -05:00
Scott Lahteine
259cf1b0b2 BQ enables this in the config. Remove here 2017-10-18 23:23:56 -05:00
Scott Lahteine
2338632270 Simplify Cartesian probing bounds 
Followup to #8011
 2017-10-18 17:16:14 -05:00
Luc Van Daele
2a88a3fd33 boolval revised (#8017) 2017-10-18 14:19:01 -05:00
Thomas Moore
84470f6b2a Update UBL mesh boundaries to accomidate beds centered at 0, 0 (#8011) 2017-10-18 10:03:00 -05:00
studiodyne
e04902f589 Add EXTRA_FAN_SPEED feature 2017-10-16 02:32:30 -05:00
Scott Lahteine
d63d08ef8b Merge pull request #7948 from gallynero/patch-1 
Enable change feedrate in delta
 2017-10-15 16:28:45 -05:00
Scott Lahteine
5c2ff6ed19 Add Capability BUILD_PERCENT 2017-10-15 03:01:36 -05:00
Scott Lahteine
5f708d47ce Add LCD_SET_PROGRESS_MANUALLY 2017-10-15 02:21:09 -05:00
Scott Lahteine
3b4b9c6d68 Unaccented French for Character Display 2017-10-14 20:17:29 -05:00
MetalSearch
8df47d76c7 Add control board MAKEBOARD Mini 
+Add French language without accent for japanese LCD
 2017-10-14 20:10:03 -05:00
Scott Lahteine
be55a49946 Merge pull request #7980 from thinkyhead/bf1_granular_sw_endstops 
[1.1.x] Software endstop options by axis
 2017-10-14 17:37:35 -05:00
Scott Lahteine
e05af35678 Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs 2017-10-14 17:14:19 -05:00
Scott Lahteine
060d16d26b Split the software endstop capability by axis. 
Based on #7975 and #7979
 2017-10-14 17:14:08 -05:00
Scott Lahteine
e17869ca20 Fix Emergency Parser 
Followup to #7459
 2017-10-14 15:58:07 -05:00
Scott Lahteine
662105c1b6 ADC sensor fix inspired by 'Evgen2' on Twitter 2017-10-14 02:39:13 -05:00
Scott Lahteine
b8ddae61e2 ubl_state no longer needed 2017-10-14 02:39:13 -05:00
Scott Lahteine
ece14af556 Improve LCD leveling value edits 2017-10-14 02:39:13 -05:00
Scott Lahteine
b07a2aa23c Add HAS_MESH conditional 2017-10-14 02:39:12 -05:00
Scott Lahteine
88857e8028 Move fade_scaling_factor_for_z to Planner 2017-10-14 02:10:46 -05:00
Scott Lahteine
8e808fcadc General cleanup, apply const 2017-10-13 16:13:36 -05:00
Scott Lahteine
da93a272a0 Move leveling_is_active to a macro 2017-10-13 16:11:27 -05:00
Scott Lahteine
3d5b10735f Remove obsolete UBL z_offset 2017-10-13 08:23:01 -05:00
gallynero
94228d4522 Enable change feedrate in delta 
Enable change the relative feedrate on a printing job in delta machines with UBL
 2017-10-12 01:55:51 +02:00
Slawomir Ciunczyk
167058b61f Different NEOPIXEL types 
Changes to support NEOPIXEL LED strips
- Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h
- ability to setup startup brightness
- ability to define sequential/non-sequential transition of color change during heating-up
- additional parameter to M150 P<brightness>
 2017-10-10 01:58:40 -05:00
Scott Lahteine
f835245ee1 Merge pull request #7908 from thinkyhead/bf1_goodbye_legacy_advance 
[1.1.x] Remove legacy ADVANCE feature
 2017-10-10 00:31:39 -05:00
Scott Lahteine
38110e220d Segmented manual moves for kinematics 2017-10-09 23:10:17 -05:00
deram
9239fcf0da Allow UBL G29 and G26 to build without a probe 2017-10-09 18:37:53 -05:00
Scott Lahteine
381ebc043f Add support for ST7565-64128N 
Based on #7447 by @Bob-the-Kuhn
 2017-10-09 17:39:03 -05:00
jmdearras
c7e0a49c94 Add some new LCD displays 
- Original CR-10
- MKS Mini Display
 2017-10-09 17:39:03 -05:00
Scott Lahteine
067622fcc6 Apply some tweaks based on 2.0.x 2017-10-09 17:39:03 -05:00
Scott Lahteine
ae256576e1 Bring configs into parity with 2.0.x 2017-10-09 17:38:39 -05:00
Scott Lahteine
cbfcce09fa Remove legacy ADVANCE feature 2017-10-09 04:27:45 -05:00
Scott Lahteine
a21201a713 LCD filename already concatentated 2017-10-07 15:14:58 -05:00
Scott Lahteine
53f2f188f2 LCD filename already concatenated 2017-10-07 15:11:28 -05:00
Scott Lahteine
a6e95c7d25 Fix display issue with SD_ALPHA_SORT caching 2017-10-07 15:07:05 -05:00
Dave Johnson
97e6663bb3 [1.1.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled (#7878) 
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled

If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print.  Saves 60 bytes PROGMEM.
add HD44780 too

* Reduce lines used

* Reduce lines used
 2017-10-07 15:00:56 -05:00
Scott Lahteine
e2ceb1b800 Merge pull request #7632 from GMagician/Wrong-sanitycheck-message-fix 
Addressing #7612
 2017-10-07 02:25:35 -05:00
Scott Lahteine
8c93295d62 Merge pull request #7873 from thinkyhead/bf1_anet_encoder_pulses 
[1.1.x] Fixing ANET encoder pulses
 2017-10-07 01:21:14 -05:00
Phr3d13
c26242a553 Fixing #7833 2017-10-07 00:07:24 -05:00
Scott Lahteine
dac5f20a01 Patch SD file draw bug 2017-10-06 23:53:08 -05:00
Scott Lahteine
b211fa4e1f Remove extra NEWPANEL settings in Conditionals_LCD.h 2017-10-06 17:23:32 -05:00
LVD-AC
355cba4aa7 Fixes for G33 2017-10-06 15:52:53 -05:00
Scott Lahteine
e287e14354 Tweak spacing in utf8_mapper.h 2017-10-06 15:11:27 -05:00
Scott Lahteine
5e63ba970d Merge pull request #7862 from thinkyhead/bf1_mapper_c2c3c4_sk 
[1.1.x] Added Slovak C2C3C4 mapper implementation.
 2017-10-06 14:56:26 -05:00
Roman Moravčík
2a46ab288e Added Slovak C2C3C4 mapper implementation. 2017-10-06 14:40:15 -05:00
Scott Lahteine
7999249a5c Set TEMP_SENSOR_0 to 1 in CR-10 example config 
As pointed out in #7692 by @totalitarian
 2017-10-06 14:29:00 -05:00
Scott Lahteine
0ec9a7f090 Fix xon_xoff_state initialization 2017-10-04 12:10:15 -05:00
Scott Lahteine
a47c5c093d Merge pull request #7459 from ejtagle/xon-xoff-sdxfer 
[1.1.x] XON/XOFF serial handshake (for faster transfers to SD)
 2017-10-02 23:52:41 -05:00
Scott Lahteine
bcb8722513 Fix DUAL_X_CARRIAGE manual move 
Addressing #7745
 2017-10-02 23:28:52 -05:00
Scott Lahteine
4c34b3ad9c Stop redundant E4_IS_TMC2130 current control 2017-10-02 23:10:34 -05:00
Scott Lahteine
1b8b5c4b06 Make prepare_move_to_destination_dualx a full move function 2017-10-02 23:10:18 -05:00
Scott Lahteine
4e19ff75b6 XON/XOFF corrections, tweaks, formatting, etc. 2017-10-02 03:52:42 -05:00
Scott Lahteine
94caabf89a Add XON/XOFF options to example configs 2017-10-02 03:52:41 -05:00
Scott Lahteine
f365448338 Merge pull request #7811 from thinkyhead/bf1_fix_resume_print 
[1.1.x] Fix broken M600 resume_print
 2017-10-01 22:54:34 -05:00
GMagician
8ab426c3a4 Updated all examples configurations 
Forgot to update examples configurations. Done now
 2017-10-01 21:04:12 -05:00
GMagician
33d28c24bf Implementing [FR] #7548 
Added new configuration to inhibit XYZ movements when home is not done
 2017-10-01 21:02:42 -05:00
Scott Lahteine
ac70048945 Only MarlinConfig.h ahead of feature block 2017-10-01 20:55:14 -05:00
MasterPIC
40a4a716e1 Fix filament change bug in resume_print 
Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion.

Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position.
So the extrusion step is mixed with the movement required to go back to the printing position.

The provided code seems to be working but probably a better fix is required.
 2017-10-01 18:42:29 -05:00
Scott Lahteine
802f147686 Remove some excess whitepsace 2017-10-01 18:25:04 -05:00
Scott Lahteine
80a0f935a1 Fix G10-G11 by adding a synchronize 
Based on #7792 by @tcm0116
 2017-09-30 17:46:31 -05:00
MasterPIC
7f8ff0a724 Show leveling status on character LCD 2017-09-27 12:18:41 -05:00
Scott Lahteine
723a34d9c7 Add confirmation to Init EEPROM command 2017-09-27 11:27:47 -05:00
Scott Lahteine
2efd5b119d Add USER_SCRIPT_RETURN option 2017-09-27 11:23:34 -05:00
Scott Lahteine
b105e47cb5 Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled 
Based on #7769
 2017-09-27 10:39:44 -05:00
DecoyPlatypus
41dcbe89dd Fixed ST7920_DELAY typo 
Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3
 2017-09-27 03:01:09 -05:00
DecoyPlatypus
70a64355f6 Fixed LCD_FOR_MELZI SanityCheck 
Sanity Check for LCD_FOR_MELZI  would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.
 2017-09-27 03:01:09 -05:00
Scott Lahteine
e37a1ded0d Increase BABYSTEP_MULTIPLICATOR to 100 
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
 2017-09-27 00:14:26 -05:00
Scott Lahteine
3e28243076 No need for LCD_PINS_Dn when unused 2017-09-27 00:12:20 -05:00
Scott Lahteine
bbb94b8f68 babystepping tweak 2017-09-27 00:12:20 -05:00
Scott Lahteine
a277b43e30 Fix babystep menu display 2017-09-27 00:12:20 -05:00
Scott Lahteine
8a994fb1b1 Fix encoder pulses for G3D_PANEL 2017-09-27 00:12:20 -05:00
Scott Lahteine
ac2ac99e15 Fix bad logic in autostart 
As pointed out by @marcio-ao in #7638
 2017-09-24 17:52:35 -05:00
Scott Lahteine
c1cc79176c Full-featured Creality configs 2017-09-24 16:52:42 -05:00
Scott Lahteine
f25dccd6d1 Disable BABYSTEP_XY by default in all configs 2017-09-24 16:52:42 -05:00
Scott Lahteine
cd09a83cfa Add size note to SDSORT_LIMIT 2017-09-24 16:52:41 -05:00
Scott Lahteine
9bbc2df217 General code cleanup, spacing 2017-09-24 16:52:41 -05:00
Luc Van Daele
74d430cb97 matrix names update (#7697) 
* matrix names update

* symplified names

* new angle normalization

* ABC

* axis

* least squares

* recalc_delta_settings

* endstop_adj

* 0p

* bug
 2017-09-24 01:45:31 -05:00
Scott Lahteine
9d4d53e2fd Update links to old wiki page 2017-09-23 22:06:45 -05:00
Scott Lahteine
00896f1713 Fix LEVEL_BED_CORNERS (No leveling required) 2017-09-23 22:00:45 -05:00
Scott Lahteine
c3a9e95a5f Define drawmenu items once, in ultralcd.cpp 2017-09-23 22:00:45 -05:00
Scott Lahteine
0afd25a010 Fix caselight compile issues 2017-09-23 22:00:44 -05:00
GMagician
5b87843fae Addressing #7612 
Replaced extruder with hotend
 2017-09-07 19:07:36 +02:00
Scott Lahteine
386b74f8c2 Merge pull request #7593 from marcio-ao/bugfix-1.1.x 
Added option for graphical overlay for Z-offset (Resubmission of #7350 and #7586)
 2017-09-02 00:01:38 -05:00
Tannoo
2a963fb5d1 UBL LCD Bugfixes (#7598) 2017-09-01 16:59:06 -05:00
Marcio Teixeira
d69c5317df Added option for graphical overlay for Z-offset 2017-08-31 14:21:39 -06:00
Scott Lahteine
367e1b54ba Merge pull request #7591 from thinkyhead/bf1_misc_patches 
M111: no args reports current flags
 2017-08-31 15:19:29 -05:00
Scott Lahteine
8a184a526a Marlin: Patch G33, allow M111 to give status 2017-08-31 14:35:00 -05:00
Scott Lahteine
353c23b16e Enforce BED_CENTER_AT_0_0 on Delta, SCARA 2017-08-31 14:34:59 -05:00
Scott Lahteine
898f48e331 CNC workspace planes for G5 
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
 2017-08-31 14:29:29 -05:00
Scott Lahteine
5851c2d36f MAX7219 followup (#7564) 
* Add MAX7219_DEBUG to Travis CI testing

* Tweak config and use standard pin naming for MAX7219_DEBUG

* MAX7219: Apply coding standards, use macros, etc.

* Make code work...
 2017-08-31 11:44:43 -05:00
Scott Lahteine
52073f21c5 Merge pull request #7556 from thinkyhead/bf1_slovak_language 
Slovak UTF-8 translation
 2017-08-27 21:05:53 -05:00
Scott Lahteine
321f98f867 Fix servo delay in Folgertech config 2017-08-27 20:53:27 -05:00
jneilliii
36771e9492 Fixes required for Creality CR-10 2017-08-27 20:39:16 -05:00
Roxy-3D
3f0b38ed5d Add Max7219 LED Matrix Debug Support (#7563) 
* Add Max7219 LED Matrix Debug Support

The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.

The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.

* Try to keep Makefile up to date.
 2017-08-25 17:03:07 -05:00
GMagician
0067bb2840 Addressing #7552 
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
 2017-08-25 03:23:16 -05:00
Scott Lahteine
2b12093589 Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben 
New feature: Part-Cooling Fan Multiplexer
 2017-08-25 03:16:40 -05:00
Michal Holes
54d48130f3 Slovak UTF-8 translation 
Slovak UTF-8 translation
 2017-08-23 19:14:35 -05:00
Scott Lahteine
86c024ce98 Organize, document pins.h include lines 2017-08-23 18:33:00 -05:00
Scott Lahteine
c7b07d20f2 Minor patches to pins files 2017-08-23 18:32:59 -05:00
Scott Lahteine
356af7dcb0 Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
Scott Lahteine
11a724d8fc Sanguinololu example configuration 2017-08-23 18:32:59 -05:00
Scott Lahteine
e337df2e98 Miscellaneous tweaks to serial outputs, code cleanups 2017-08-23 18:32:58 -05:00
Vben
c0409b85e7 New feature: Part-Cooling Fan Multiplexer 2017-08-18 15:59:04 -05:00
Scott Lahteine
e82e9073d6 Merge pull request #7530 from GMagician/Code-reduction 
Code reduction with some configurations
 2017-08-18 13:57:59 -05:00
GMagician
6127154af3 Fix identation by tab 
There was a tab instead of spaces
 2017-08-18 11:34:55 +02:00
GMagician
b94a1c6b9f Code reduction this some configurations 
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
 2017-08-18 11:11:00 +02:00
GMagician
405a2132f3 #7529 compile fix 
I made an error in previous fix
 2017-08-17 22:04:28 +02:00
GMagician
869d7f3703 #7504 missing part 
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
 2017-08-17 21:43:47 +02:00
Scott Lahteine
101ba70517 Merge pull request #7505 from thinkyhead/bf1_anet_1_pio 
Add Anet 1.0 to Platformio.ini
 2017-08-17 00:33:20 -05:00
Vben
4817b39d98 Added new feature for AutoParking Extruder (APE) 2017-08-16 17:33:11 -05:00
Scott Lahteine
6772e33ef6 Use [XY]_CENTER for error correction 
Followup to #7512
 2017-08-16 16:13:09 -05:00
Scott Lahteine
385f1bb9e5 Merge pull request #7504 from thinkyhead/bf1_servo_delays 
Individual servo delays
 2017-08-16 16:05:22 -05:00
Scott Lahteine
2a31c9f2ce Merge pull request #7515 from cdedwards/bugfix-1.1.x 
Fix for G26 spam output
 2017-08-16 16:01:10 -05:00
MTrab
5fa61c0ad3 Add Anet 1.0 to Platformio.ini 
Added env:anet10 to platformio.ini for easy compile and upload to this board
 2017-08-16 15:59:20 -05:00
Scott Lahteine
b3f59ec945 Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16 
Add "Level Corners" menu item
 2017-08-16 15:58:15 -05:00
Tannoo
b33739d493 UBL_Language_Update (#7520) 
* UBL_Language_Update

Translatable strings

* Use slightly better wording...

* Use slightly better wording...
 2017-08-16 09:49:04 -05:00
Scott Lahteine
a1878cd1c0 Add "Level Corners" menu option 2017-08-16 02:54:33 -05:00
Scott Lahteine
0a18fb735e Use "PSU" label to fit on screen 2017-08-16 02:51:00 -05:00
Scott Lahteine
30887feae3 Tweak some formatting in ABL G29 2017-08-16 02:51:00 -05:00
Thomas Moore
257b693ab0 Advanced pause fixes (#7518) 
* Disallow filament change while paused

* Use kinematic movemements in pause_print and resume_print
 2017-08-15 22:57:13 -05:00
Tannoo
ab2ac1af71 UBL_LCD_storage_corrections (#7517) 
Correcting the storage selection.
Also EEPROM error handling on the LCD.
 2017-08-15 21:01:11 -05:00
cdedwards
f1843211e6 Fix for G26 spam output 
while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.
 2017-08-15 17:04:53 -06:00
Roxy-3D
be5ca34215 Allow G29 to work correctly even if nozzle is off the mesh. (#7512) 
* work around previous regressions...
 2017-08-15 17:04:52 -05:00
Scott Lahteine
06541ec885 Merge pull request #7448 from thinkyhead/bf1_delta_fixes 
Prevent damage if DELTA_HEIGHT is set badly
 2017-08-15 16:35:09 -05:00
GMagician
e9c72978c7 Implement SERVO_DELAY as array 
This modify give SERVO_DELAY x servo basis
 2017-08-15 00:28:47 -05:00
Scott Lahteine
96ae53cf41 Use MOVE_SERVO macro where possible 2017-08-15 00:28:39 -05:00
Scott Lahteine
3be9c19f12 Hold on move axis screens 2017-08-14 22:51:47 -05:00
Scott Lahteine
8fd58cd6dc Patch goto labels for consistency 2017-08-14 22:51:47 -05:00
Scott Lahteine
75e6f72c89 Fix hexadecimal number formatting 2017-08-14 22:50:44 -05:00
Scott Lahteine
ac76101ec3 Eliminate goto in gcode_M48 2017-08-11 17:00:40 -05:00
Scott Lahteine
75e6ead5fd Eliminate goto in gcode_G33 2017-08-11 17:00:40 -05:00
Scott Lahteine
6bd63d27b5 Updates to G29 for probe error handling 2017-08-11 17:00:40 -05:00
Thomas Moore
f54e0fc90f Prevent damage if DELTA_HEIGHT is incorrect 2017-08-11 16:09:14 -05:00
Scott Lahteine
0938c62b48 Neater position_is_reachable call 2017-08-11 15:55:32 -05:00
Scott Lahteine
9d95b1b4df Tweak Conditionals_post.h 2017-08-11 15:55:32 -05:00
Scott Lahteine
35d5a7bdff Tweak CR-10 config/pins 2017-08-11 15:55:31 -05:00
Scott Lahteine
419c8969a7 Merge pull request #7479 from thinkyhead/bf1_fix_italian 
Fix Italian string length
 2017-08-10 18:42:35 -05:00
Frederik Kemner
25a11cd485 Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 (#7480) 2017-08-10 16:53:04 -05:00
Scott Lahteine
7f3406d47b Fix Italian string length 
Addressing #7264
 2017-08-10 15:41:35 -05:00
etagle
2864ef8c7f Slight improvement to the line parsing logic, saving 8 cycles per character 2017-08-08 02:57:55 -03:00
etagle
534bbb81ff Adding XON/XOFF and STATISTICS implementation 2017-08-08 02:46:37 -03:00
etagle
3e5485de92 Enforcing requirements so XON/XOFF software handshake works and no drops of data are experienced while transferring data to an SD Card. I tested this with a CH340 USB to serial adapter (quite typical) at baudrates as high as 1000000 on a Atmega2560 running at 16Mhz, with no problems at all. We need a 1024 byte RX buffer. Less than that and we will have drops, higher than that is not needed 2017-08-08 02:30:04 -03:00
etagle
9e147e9ac4 Adding XON/XOFF and STATISTICS configuration settings and proper documentation on their usage for serial port 2017-08-08 02:22:33 -03:00
etagle
8ab2e420f6 Adding separate RX_BUFFER_SIZE configuration setting and proper documentation on its usage 2017-08-08 02:18:42 -03:00
etagle
b4c53af07d Adding a new macro to be able to determine if a given integer value is a power of 2 2017-08-08 02:09:50 -03:00
Jozsef Kiraly
97c21e9007 Support for Geeetech GT2560 Rev.A/Rev.A+ 2017-08-06 00:42:54 -05:00
Scott Lahteine
b2822a59f9 Add a sanity check for valid bed size 2017-08-05 03:49:04 -05:00
Scott Lahteine
a7e5c1bf19 Use float to init TMC2133 steps-per-mm 2017-08-05 03:48:52 -05:00
Scott Lahteine
dd66d21749 Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check 
As proposed in #7429
 2017-08-05 03:48:52 -05:00
richarddeweerd
b370906031 Example config for Geeetech I3 Pro X with GT2560 controller 2017-08-05 03:48:52 -05:00
Scott Lahteine
804818b4d9 Bring configs up to date 2017-08-05 03:48:52 -05:00
Scott Lahteine
dd841a3675 Merge pull request #7410 from benlye/user-script-feedback 
Make audible user script feedback optional
 2017-08-05 02:59:56 -05:00
Florian Heilmann
0fd2923a9f Fix compilation with ADVANCED_PAUSE_FEATURE without SDSUPPORT (#7412) 
* Fix compilation of ADVANCED_PAUSE_FEATURE without SDSUPPORT

* Fix Identation

* Make use of IS_SD_PRINTING macro

as per @MagoKimbra
 2017-08-05 02:58:38 -05:00
benlye
24af9e1bf4 Make audible user script feedback optional 
Add a parameter to enable/disable audible user script feedback
 2017-08-04 17:24:10 +01:00
Florian Heilmann
6827a162bb Update language_de.h 
Add
MSG_BLTOUCH                    
MSG_DELTA_SETTINGS            
MSG_UBL_MESH_EDIT                
MSG_UBL_OUTPUT_MAP_BACKUP        
MSG_UBL_STEP_BY_STEP_MENU       
MSG_Z_FADE_HEIGHT
 2017-08-04 09:35:21 +02:00
Scott Lahteine
3497153cf1 Followup cleanup patch 
Fix regression in #7428
 2017-08-03 14:55:22 -05:00