MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,935 Commits 1 Branch 0 Tags 96 MiB
095cc75838
Commit Graph

8254 Commits

Author SHA1 Message Date
Scott Lahteine
df75e9d692 Fix BLTOUCH compile error 
Followup to #10249
 2018-03-29 17:57:49 -05:00
AnHardt
86c3be7089 No delay in sensorless quick homing (#10253) 2018-03-29 16:09:19 -05:00
Scott Lahteine
575b099e40 Alert users about low Z jerk values 2018-03-28 22:58:41 -05:00
Scott Lahteine
360166f626
Merge pull request #10249 from thinkyhead/bf1_homing_move_adjustments 
[1.1.x] Improvements to general and delta homing
 2018-03-28 22:05:40 -05:00
Scott Lahteine
b5f1a4141c "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
Scott Lahteine
0401f4ce14 Clear sensorless homing in home_delta after first move-to-top 2018-03-28 21:19:14 -05:00
Scott Lahteine
9f3b4d537d Do moves towards endstops differently in do_homing_move 2018-03-28 21:19:14 -05:00
Scott Lahteine
deefd2defa
Wait before turning off PRINTER_EVENT_LEDS at print end (#10247) 2018-03-28 20:32:32 -05:00
Scott Lahteine
1e31b56b0f Fix checksum + card.saving 
Followup to #10204
 2018-03-28 18:40:36 -05:00
Scott Lahteine
86e58df324 Fix G10/G11 debug logging 2018-03-28 18:40:36 -05:00
Scott Lahteine
3edf9904f4 Fix linear/3-point manual leveling buffer overrun 
Fixes #10137
 2018-03-28 18:40:36 -05:00
Scott Lahteine
8f461568e0 Undo German changes 
See 941e9bd329 (commitcomment-28262166)
 2018-03-28 14:46:42 -05:00
Scott Lahteine
e848bebb10 Fix missing comma in tmc_sgt 
Fixes #10209
 2018-03-28 14:44:30 -05:00
Adrian Cuzman
f84f7e5a38 Require a checksum when writing to SD (#10204) 
When streaming commands to SD with XON/XOFF, errors can occur and cause incomplete commands to be written to the file. This change ensures that only commands with line numbers and checksum will be saved to SD.
 2018-03-28 14:43:41 -04:00
Rob Power
677bd19dbf [1.1.x] NANODLP_Z_SYNC requires linear axes (#10239) 2018-03-28 14:02:58 -04:00
Scott Lahteine
dc05d7fc2b Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
Thomas Karl Pietrowski
bfdd14be4f bq Hephestos2: Allow bed leveling (#10234) 
* Increases the offset, needed to allow the nozzle to touch the bed
* By default uses an offset of -4. This one is minimally far way from the buildplate and therefore only fine-tuning is needed to set the correct distance.
 2018-03-27 22:06:14 -04:00
Kai
941e9bd329 Update language_de.h (#10216) 
Wrong meaning
 2018-03-25 15:21:26 -04:00
Scott Lahteine
e1f8c97b21
Chinese updates (#10215) 
From #10211 by @yhfudev
 2018-03-25 12:38:08 -04:00
Scott Lahteine
71c05f1b57 Enforce minimum TMC2130 / TMC2208 libs 2018-03-24 15:56:09 -04:00
Scott Lahteine
2c79faede9
Z correction on tool-change for all HAS_MESH (#10198) 2018-03-23 13:11:51 -05:00
Scott Lahteine
94badcbace Use pgm_read_ptr for tables of pointers 2018-03-23 02:17:51 -04:00
Scott Lahteine
2746eb589e Fix size of EEPROM tmc_hybrid_threshold 
Followup to #10101
 2018-03-23 02:04:45 -04:00
teemuatlut
f264228074 [1.1.x] TMC: Match axis label order (#10189) 2018-03-23 01:02:42 -05:00
Roxy-3D
994fdb5179
Get data declarations consistent... 2018-03-22 19:22:49 -05:00
Scott Lahteine
c57545ee08 blocks_queued => has_blocks_queued 2018-03-21 19:08:02 -05:00
Scott Lahteine
647c04def8 Automatically reset stepper timeout in manage_inactivity 
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
 2018-03-21 19:08:02 -05:00
Roxy-3D
9e987e4971
Correct truncated comment 2018-03-21 16:53:40 -05:00
Scott Lahteine
ba55602462 Tweaks to M915 2018-03-21 05:41:00 -05:00
Scott Lahteine
ec46336df7 For MK2_MULTIPLEXER undef DISABLE_INACTIVE_EXTRUDER 
Fix #10098
 2018-03-21 05:41:00 -05:00
Scott Lahteine
d57adbb88b Trust the bootloader to clear globals 2018-03-21 05:41:00 -05:00
Scott Lahteine
b24099c9d0 Allow G53 to go back to native space 2018-03-21 01:38:41 -05:00
Scott Lahteine
203d3f8f56 UBL G29 parity with 2.0.x 2018-03-21 01:36:16 -05:00
Scott Lahteine
d9e1cbebea Tweak use of move_z_after_probing 2018-03-21 01:36:16 -05:00
Scott Lahteine
e5fbbbc068 Allow no raise after run_z_probe in probe_pt 2018-03-21 01:36:16 -05:00
Scott Lahteine
4eddcf9142 Also suspend keepalive messages with suspend_auto_report 2018-03-21 00:26:00 -05:00
Scott Lahteine
bc01200495
Merge pull request #10101 from thinkyhead/bf1_eeprom_M913 
[1.1.x] More complete Trinamic driver options
 2018-03-20 23:14:10 -05:00
AnHardt
105c81217c Make 2 constants in autotune configurable 
But hidden, since changes are rarely needed.
 2018-03-20 16:39:27 -05:00
AnHardt
3911c38d5e Fix autotune Thermal Protection 
When `THERMAL_PROTECTION_BED` is off but `THERMAL_PROTECTION_HOTENDS` is on, `watch_temp_period` and `watch_temp_increase` are initialized with the values for `THERMAL_PROTECTION_HOTENDS`. Later it is not tested if these values are for the bed or the nozzles.

- Add test.
- Name a constant.

Fix for #10150
 2018-03-20 16:38:38 -05:00
Bob-the-Kuhn
80adb124f7 remove MARLIN line , change to logical pin (#10163) 
delete physical pins from AT90USB
 2018-03-20 16:24:17 -05:00
teemuatlut
8e783e24e8 [1.1.x] TMC: Fix CURRENT_STEP_DOWN (#10169) 2018-03-20 15:15:15 -05:00
Scott Lahteine
8a19bc0c0e Prevent null pointer crash in Endstops::update 
Thanks to Evgeny Kotsuba!
 2018-03-20 04:23:38 -05:00
Scott Lahteine
312bebff9a Add 'I' parameter to M906/M913/M914; 'T' to M906/M913 2018-03-19 22:06:04 -05:00
Scott Lahteine
4995e0ebfa Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS. 2018-03-19 22:06:04 -05:00
Scott Lahteine
84bbd018ab Improve Trinamic support in the EEPROM 2018-03-19 22:06:04 -05:00
Scott Lahteine
a03502080e Consolidate smart stepper driver initialization 2018-03-19 22:06:04 -05:00
Scott Lahteine
72776f647b Move _AXIS macro to macros.h 2018-03-19 17:59:59 -05:00
Scott Lahteine
4eb4476ce6
Merge pull request #10153 from thinkyhead/bf1_fewer_options 
[1.1.x] Consolidate 3-point probing, auto delta probe radius
 2018-03-19 04:47:13 -05:00
Scott Lahteine
a66ae52234
Add CorePQ support for BABYSTEPPING (#10074) 2018-03-19 02:51:30 -05:00
Scott Lahteine
68b9503b96 MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS 2018-03-19 02:17:45 -05:00
Scott Lahteine
cf4e2e507f Consolidate 3-point leveling point options 2018-03-19 01:55:51 -05:00
Scott Lahteine
af3500044a Power off in kill instead of setting PS_ON to input 2018-03-18 20:59:02 -05:00
Scott Lahteine
5793ca42b5 Fix matrix.debug output 2018-03-18 20:03:34 -05:00
Scott Lahteine
07b1ac06a9 More concise tmc_util output, fix a ternary type 2018-03-18 19:10:16 -05:00
Scott Lahteine
bba2a3b906 Prevent lcd_update stack overflow on SD Card change 2018-03-18 18:53:34 -05:00
Scott Lahteine
80c70f33eb Squash UBL G29 postscript comment 2018-03-18 18:35:41 -05:00
Scott Lahteine
d16f443d33
Fix home_delta for SENSORLESS_HOMING (#10144) 2018-03-17 20:52:14 -05:00
Scott Lahteine
f7de05e50c General spacing cleanup 2018-03-17 16:51:34 -05:00
Mitchell Abbott
aef23c9637 [1.1.x] Update X/Y/Z pin assignments for Einsy Rambo (#10131) 2018-03-17 16:40:15 -05:00
Scott Lahteine
7cf2788cc3 Easier override of ST7920 LCD timing 2018-03-17 02:37:24 -05:00
Scott Lahteine
c294613b53 Fix CardReader::getStatus when not printing 2018-03-17 02:37:24 -05:00
Scott Lahteine
6146126b2a Fix SWITCHING_EXTRUDER manual movement 2018-03-16 03:21:56 -05:00
Scott Lahteine
5492f15633 Reduce size of "only one" sanity checks 2018-03-16 02:43:28 -05:00
Scott Lahteine
4d1df2e357 Fix some spelingz 2018-03-16 01:26:38 -05:00
Scott Lahteine
a560c0f7cd Add C parameter to M27 to get the current filename 
In answer to #10001

Add an option to retrieve the currently open file name (long filename if possible).
 2018-03-15 22:55:30 -05:00
Scott Lahteine
ec30e8c9ef Allow NULL prepend in lsDive 2018-03-15 22:41:56 -05:00
Scott Lahteine
bc0e977229
Delta support for multiple hotends with offsets (#10052) 2018-03-15 22:29:33 -05:00
Scott Lahteine
1993365967 Update Marlin for newest TMC libraries 
- TMC2130Stepper v2.2.0
- TMC2208Stepper v0.0.4
 2018-03-15 21:23:15 -05:00
shaktee
c2ba9a03ee BIBO2 default update and Cyclops config (#10107) 2018-03-15 00:17:04 -05:00
Scott Lahteine
7b2ea8febe Sync main adv config with recent change 2018-03-15 00:09:23 -05:00
Scott Lahteine
e38307355e Fix E direction for MK2_MULTIPLEXER and LIN_ADVANCE 2018-03-14 07:57:19 -05:00
Scott Lahteine
5c81ce2bb8
When STATUS_EXPIRE_SECONDS is 0, hide the position. (#10100) 
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
 2018-03-14 02:44:41 -05:00
Studiodyne
7f8984b500 [1.1] FWRetract Reset (Best way) (#10084) 2018-03-14 01:34:15 -05:00
Scott Lahteine
062b955f1d
Merge pull request #10092 from thinkyhead/bf1_trinamic_config 
[1.1.x] Clean up Trinamic config options, sanity check
 2018-03-14 01:16:35 -05:00
Scott Lahteine
ccb2a95456 Update includes for gcode.h => parser.h 2018-03-14 01:01:45 -05:00
Scott Lahteine
00165699e9 Move gcode.* to parser.* for 2.0.x parity 2018-03-14 00:55:20 -05:00
Scott Lahteine
cc4148e246 Use lcd_goto_previous_menu_no_defer more 2018-03-14 00:49:11 -05:00
Scott Lahteine
dc98ee553f Fix compiler warning for ANALOG_SELECT 2018-03-13 22:33:56 -05:00
Scott Lahteine
738a8495ad Improve TMC config organization, naming 2018-03-13 21:43:43 -05:00
Scott Lahteine
17b4ba7c9c Add TMC2208 include in tmc_util.h 2018-03-13 21:41:12 -05:00
Shen Yiming
96c54c188a Fix MKS_12864_OLED blank issue #10071 (#10094) 2018-03-13 04:51:21 -05:00
Scott Lahteine
e63cb5fe8f
[1.1.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10068) 
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
 2018-03-13 01:15:29 -05:00
Scott Lahteine
4dad8628ff Move MKS_12864OLED to lcd_implementation_init 2018-03-12 08:51:48 -05:00
Scott Lahteine
009fd186f8 M218: report with no parameters 2018-03-12 08:08:52 -05:00
Scott Lahteine
8c7e98627f Patch do_blocking_move_to so 'destination' can be used 2018-03-12 08:06:48 -05:00
Scott Lahteine
656c3c3b2a Followup to auto-assign dual axis CS pins 2018-03-12 07:23:02 -05:00
Scott Lahteine
9ec8762497 Fix typo in ubl.prepare_segmented_line_to 2018-03-11 10:22:52 -05:00
Scott Lahteine
33b18dc801 Add Z_AFTER_PROBING to example configs 2018-03-11 09:48:03 -05:00
Scott Lahteine
0aa100a31e Add Z_AFTER_PROBING option 
Some fix-mounted probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
 2018-03-11 09:48:02 -05:00
Scott Lahteine
879b54a8bc
Auto-assign CS pins for X2, Y2, Z2 (#10056) 
Fixes #9211
 2018-03-11 09:25:02 -05:00
Scott Lahteine
d1256be7ec FlushSerialRequestResend => flush_and_request_resend 2018-03-11 07:34:21 -05:00
Scott Lahteine
eb6f44372e Finish scroll_screen, fixing direction/multiplier 
Fixes #10041
 2018-03-11 04:44:28 -05:00
Scott Lahteine
b0abce5a7e Disambiguate 'else' in stepper code 2018-03-10 21:47:08 -06:00
Scott Lahteine
72df10c669
Merge pull request #10038 from thinkyhead/bf1_dual_endstops_offsets 
[1.1.x] Dual XYZ endstops parity with 2.0.x
 2018-03-10 07:17:20 -06:00
Sebastianv650
b8f1b74abd [1.1.x] Silence M204 (#10036) 
`M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.
 2018-03-10 07:15:52 -06:00
Scott Lahteine
e8fc0e9a57 Move [xyz]_endstop_adj to Endstops class 2018-03-10 06:54:18 -06:00
Scott Lahteine
4b5a42f86a Tweaks to E2END, mesh slot offset 2018-03-10 06:54:18 -06:00
Scott Lahteine
83c83e3127 Update Marlin G-codes summary 2018-03-10 06:54:18 -06:00
Scott Lahteine
5ce64f6d16 Combine __AVR__ and USBCON for 2.0.x parity 2018-03-10 01:51:35 -06:00
Scott Lahteine
cce80fd41c Add UNKNOWN_Z_NO_RAISE to example configs 2018-03-09 23:11:35 -06:00
Scott Lahteine
1b79217fbc Add UNKNOWN_Z_NO_RAISE option 
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
 2018-03-09 23:11:35 -06:00
Scott Lahteine
192507b524 Move do_probe_raise closer to set_probe_deployed 
…and limit the raise to Z_MAX_POS
 2018-03-09 23:03:12 -06:00
Scott Lahteine
0d13c5d077 Fix position_is_reachable_by_probe, add comments 
Fix #10029
 2018-03-09 21:18:50 -06:00
Roxy-3D
fd3e243989
prevent steppers from turning off during manual probes 2018-03-09 17:54:41 -07:00
Scott Lahteine
12b697c5cd Fix UPDATE_ENDSTOP for CorePQ compatibility 
Fixes #9939
 2018-03-09 08:49:44 -06:00
Scott Lahteine
03676d8e2f Fix _tmc_say_axis string address 
Fixes #10003
 2018-03-09 06:07:52 -06:00
Scott Lahteine
3c6d2d7711 Add more delay before pulse off in Linear Advance ISR 
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
 2018-03-09 05:24:10 -06:00
Scott Lahteine
a9392c6b27 Set a safe default MINIMUM_STEPPER_PULSE of 2 2018-03-09 03:59:18 -06:00
Scott Lahteine
fa12866de3
Have position_is_reachable_by_probe use the whole bed (#10019) 
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
 2018-03-09 03:38:00 -06:00
Scott Lahteine
9508f9ec75 Fix: utility.h requires types.h 2018-03-09 03:33:25 -06:00
Scott Lahteine
beb7e2ed93 Allow servo.cpp to use safe_delay 2018-03-09 03:07:55 -06:00
Scott Lahteine
f24cdf1081
Add Einsy RAMBo board (#10018) 2018-03-09 01:40:34 -06:00
Scott Lahteine
ba1c2a9819 Update servo.* for parity with 2.0.x 2018-03-08 19:32:32 -06:00
Scott Lahteine
e5e3c3ff35
Update powersupply_on in power_on/off (#10014) 
Fix #10004
 2018-03-08 18:56:41 -06:00
Scott Lahteine
9c667b5436 Init old_red to 127 to ensure initial change 
Fix #10012
 2018-03-08 18:27:39 -06:00
Scott Lahteine
de8fbdea6d Init watchdog last in setup() 2018-03-08 17:36:01 -06:00
Scott Lahteine
282170a259 Tweak manual move eindex arg 2018-03-08 16:26:11 -06:00
Scott Lahteine
31980f01ba Wrap stepper_indirection macros in do{}while(0) 2018-03-08 16:23:49 -06:00
Scott Lahteine
dcd2fa9291 Fix compile error with MAX_MESSAGE_LENGTH 
Fix #9988
 2018-03-07 21:58:19 -06:00
Bob-the-Kuhn
179de4423d remove conditional download of custom character RAM 2018-03-07 17:50:18 -06:00
Scott Lahteine
d11ed30584 Fix compile error with char LCD 
Followup to f177da4
 2018-03-07 16:53:03 -06:00
Scott Lahteine
1381b5d57d Fix LA_active_extruder (static) 2018-03-07 05:50:35 -06:00
Scott Lahteine
63d6dddae1 Wrap stepper_indirection macros 2018-03-07 05:45:30 -06:00
Sebastianv650
e5d69d313c Fix for LA (#9965) 
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
 2018-03-07 05:32:49 -06:00
Scott Lahteine
f177da45bb Fix encoder position for sddirectory 2018-03-07 05:20:15 -06:00
Scott Lahteine
dc40b3ec00 Suspend auto-report during UBL map output 2018-03-07 01:58:37 -06:00
Scott Lahteine
e7d519c898 Add suspend_auto_report flag to suppress auto-report 2018-03-07 01:58:37 -06:00
Scott Lahteine
2bf1bbf399 Add HAS_TEMP_SENSOR conditional 2018-03-07 01:58:31 -06:00
Scott Lahteine
2d0d5eccd8 Move AUTO_REPORT_SD_STATUS to SDSUPPORT block 2018-03-07 01:58:31 -06:00
Scott Lahteine
1f77930e01
Rebuild SD file sort array on Stop SD Print (#9975) 
Thanks Chuck Hellebuyck.
 2018-03-07 01:42:30 -06:00
Scott Lahteine
1ed1882766 Strip extra newline 2018-03-07 00:22:31 -06:00
Scott Lahteine
dc733192be Add AUTO_REPORT_SD_STATUS to example configs 2018-03-07 00:06:17 -06:00
Scott Lahteine
fb9de6e787 Add AUTO_REPORT_SD_STATUS feature 
For parity with 2.0.x ahead of 1.1.9 release.
 2018-03-07 00:06:03 -06:00
Scott Lahteine
ecddd2a655 Make enums into implicit char 2018-03-06 23:36:56 -06:00
Scott Lahteine
fa998178e9 Move extended_axis_codes to PROGMEM 2018-03-06 22:20:35 -06:00
Scott Lahteine
73aa7ffff9 LIN_ADVANCE single stepper optimization 2018-03-06 19:27:43 -06:00
Scott Lahteine
50ad30259f Support duplication mode in LIN_ADVANCE 2018-03-06 19:12:54 -06:00
Scott Lahteine
fa3492fc6e Support DISTINCT_E_FACTORS in tmc_util.cpp 2018-03-06 18:34:43 -06:00
Scott Lahteine
536fa07ed5 Show E0-E4 in monitor_tmc_driver output 
Fix #9966
 2018-03-06 18:27:37 -06:00
Scott Lahteine
828dea2ee0
Improvements to Lightweight ST7920 status screen. (#9960) 
- Show units on lightweight status screen.
- Fixed progress bar so it works with M73
 2018-03-06 01:49:45 -06:00
Scott Lahteine
3bae28a5e1
Put more code between pulse start and stop (#9956) 2018-03-05 23:05:42 -06:00
Scott Lahteine
70e9c07b2d
Fix menu highlight glitch, tweak scrolling code (#9954) 2018-03-05 23:05:05 -06:00
Scott Lahteine
0b016c08c9 M851 - report only with no Z parameter 2018-03-05 02:10:32 -06:00
Scott Lahteine
890a396a2a
Import FilamentRunoutSensor with debounce (#9947) 2018-03-05 01:49:19 -06:00
Scott Lahteine
b01f10dfac Fix custom bootscreen compiler warning 2018-03-04 23:37:32 -06:00
Scott Lahteine
f0d8d76f68
Use static classes for job timers (#9940) 2018-03-04 22:52:25 -06:00
Sebastianv650
bc08ce86be Fix broken reverse planner (#9914) 
See MarlinFirmware/Marlin#9913 for details.
 2018-03-04 21:18:35 -06:00
Scott Lahteine
081ab35e82 Remove some trailing whitespace 2018-03-04 21:13:36 -06:00
Scott Lahteine
eacb8346af Fix #9904 - toDigital should show 00-99 hours 2018-03-04 15:03:31 -06:00
Scott Lahteine
d77be210c1 Fix EXTRA_CYCLES_E handling in LIN_ADVANCE 2018-03-04 15:03:31 -06:00
teemuatlut
36a94ac586 Fix M915 compiling 2018-03-04 11:26:30 +02:00
Scott Lahteine
5ad60d89a8 autotemp_factor is not value_celsius_diff 
See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822
 2018-03-03 23:29:35 -06:00
Thomas Moore
bdfeb54a9d Clear retracted status when homing the Z axis 2018-03-03 23:17:10 -06:00
Scott Lahteine
1f488292cd
Add board MKS_BASE_HEROIC (#9924) 
Followup to #9008

- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
 2018-03-03 23:14:28 -06:00
Scott Lahteine
b6fa55aa37
Fix: M112 calling kill from interrupt (#9922) 
Fix #9906
 2018-03-03 23:13:53 -06:00
Scott Lahteine
7450b7c36e Sanity check for custom boot / status bitmaps 2018-03-03 20:31:06 -06:00
Scott Lahteine
3cdd2591ed Update custom boot screen description 2018-03-03 20:10:35 -06:00
Scott Lahteine
cd4c35c543 Correct M401 / M402 description 2018-03-01 19:11:30 -06:00
Scott Lahteine
b86125c6d6 Update M900 verbiage 2018-03-01 15:25:33 -06:00
Ben Lye
432b72e7a8 Fix DIGITAL_PIN_TO_ANALOG_PIN macro for Atmega1284p (#9883) 2018-03-01 15:14:08 -06:00
Scott Lahteine
a6326d25fb Drop SCARA_FEEDRATE_SCALING 
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
 2018-03-01 04:28:42 -06:00
Bob-the-Kuhn
de26374746 [1.1.x] Add 1284 support & misc. bug fixes (#9869) 2018-03-01 03:05:27 -06:00
Studiodyne
d25f0a5a21 Fix for Fwretract bugfix1.1.x (#9872) 2018-03-01 02:59:42 -06:00
Sebastianv650
951b65c2de Add sanity checks to Linear Advance 1.5 (#9859) 2018-03-01 02:10:39 -06:00
Scott Lahteine
f7b44ac2a6
Fix SENSORLESS_HOMING for Core Kinematics (#9871) 2018-03-01 01:49:41 -06:00
Scott Lahteine
803c3169ad Fix lcd_quick_feedback for BTN_BACK 2018-02-28 20:23:34 -06:00
AnHardt
f151bf8bb7 Fix some mapper, charsize problems (#9865) 2018-02-28 18:56:45 -06:00
Scott Lahteine
198b059b44 Fix manual move axis display value 
The workspace offset is now added to the XYZ values.
 2018-02-28 17:31:38 -06:00
Scott Lahteine
a18d6171a6 Fix Z safe homing sanity check for no probe 
Fix #9851
 2018-02-28 05:30:24 -06:00
Scott Lahteine
8af3c04e7d Fix BTN_BACK 
Followup to #9836
 2018-02-28 03:27:36 -06:00
Anton Piliugin
c5fd486e91 [bugfix-1.1.x] Update russian language 28 Feb 2017 (#9849) 2018-02-28 03:06:33 -06:00
Ben Lye
897170294c Fix Zonestar / ADC keypad with RAMPS. (#9841) 2018-02-28 00:07:42 -06:00
Scott Lahteine
2bde53bd46
Add support for BACK button (if any) (#9836) 2018-02-26 22:53:08 -06:00
Scott Lahteine
1eb3364ac9
Import ENABLE_LEVELING_FADE_HEIGHT from 2.0.x (#9834) 2018-02-26 22:16:09 -06:00
Scott Lahteine
ce5c848284 Remove dupes from pinsDebug_list.h 2018-02-26 19:19:13 -06:00
Scott Lahteine
114e9b0f56 Fix CR-10 status screen missing commas 
Fix #9660
 2018-02-26 15:50:04 -06:00
geigerg
3f56bd91d2 Add files via upload (#9827) 2018-02-26 15:44:24 -06:00
Scott Lahteine
ddfddae4f4 Fix subsequent G29 J commands 
Fix #9826. Solution by @gloomyandy
 2018-02-26 14:51:40 -06:00
Scott Lahteine
c776cda9fa Pins parity with 2.0.x 2018-02-26 01:20:57 -06:00
Scott Lahteine
9d7a1ae9f5
Mesh export in Bilinear + UBL M503 (#9818) 2018-02-26 01:00:56 -06:00
Scott Lahteine
97a35dd534 Compile flags needed in UBL.h 2018-02-25 22:18:13 -06:00
Scott Lahteine
e3e51a9a8d Fix types.h dependency 2018-02-25 22:01:01 -06:00
Scott Lahteine
d0720a565f Finish ubl header patch 
Followup to aa380ae
 2018-02-25 21:35:11 -06:00
Sebastianv650
72d5029f42 Useless line removed (#9813) 
nextAdvanceISR is set in the next if structure in every possible
situation, so it's useless to set it once more before.
 2018-02-25 21:21:15 -06:00
Scott Lahteine
aa380aeb4b
Parity with 2.0.x in ubl and EEPROM (#9817) 2018-02-25 21:17:36 -06:00
Scott Lahteine
1617798287 Remove conditional wrap from ubl.h 2018-02-25 20:40:05 -06:00
Scott Lahteine
8f6a5d538f Fix CONFIG_ECHO_START 
In reference to #9633
 2018-02-25 05:37:05 -06:00
Scott Lahteine
c1a1f80fff Standardize encoder buzz defaults 2018-02-24 22:55:46 -06:00
Scott Lahteine
8488d64062 Standardize encoder defaults 2018-02-24 22:37:55 -06:00
Scott Lahteine
7dab8ca5dc Add Creality Ender-4 configurations 2018-02-24 22:01:16 -06:00
Scott Lahteine
d0c8aabd28 Move Creality Ender-2 configurations 2018-02-24 22:01:11 -06:00
Scott Lahteine
8c22f9fd4f Bring some example configs up to speed 2018-02-24 22:00:15 -06:00
Scott Lahteine
2e3d74f60f Drop a conditional only used once 2018-02-24 16:31:05 -06:00
Roxy-3D
9e3025e07b
Change Folger Tech i3-2020 defaults... 2018-02-24 10:28:08 -06:00
Scott Lahteine
5299b577d1
Spanish (UTF8) Language (#9785) 
From #7314 by @MrAmericanMike
 2018-02-23 20:23:35 -06:00
Scott Lahteine
47619e4476 Fix a progress bar condition 2018-02-23 19:42:01 -06:00
Scott Lahteine
6845f17fb2 Prettify LCD_PROGRESS_BAR options 2018-02-23 19:13:03 -06:00
Zachary Hill
2aaa1a5815 Further fix of LCD_PROGRESS_BAR (#9784) 2018-02-23 18:52:25 -06:00
Scott Lahteine
f36da47b85 tweak pins_RAMPS.h 2018-02-23 15:10:25 -06:00
Scott Lahteine
03da273ea6 Fix LCD_PROGRESS bar 
Fix #9208
 2018-02-23 13:59:55 -06:00
Scott Lahteine
1c1d444b0c
Merge pull request #9774 from thinkyhead/bf1_g28_restore_leveling 
[1.1.x] Add RESTORE_LEVELING_AFTER_G28 option
 2018-02-23 13:43:03 -06:00
Scott Lahteine
742733d714
Un-pause on print cancellation (#9779) 2018-02-23 13:42:21 -06:00
Scott Lahteine
235d024505 Add RESTORE_LEVELING_AFTER_G28 to example configs 2018-02-23 12:42:21 -06:00
Scott Lahteine
921001f004 Add RESTORE_LEVELING_AFTER_G28 option 
Reference #8670
 2018-02-23 12:42:17 -06:00
Scott Lahteine
0d9d11a2d5 Fix HardwareSerial include for TMC2208 2018-02-23 12:33:14 -06:00
Scott Lahteine
113a5fa80e Fix broken LEVEL_BED_CORNERS 
Fix #8805
 2018-02-23 09:10:33 -06:00
Scott Lahteine
4ea058260b Fix #9732 again 2018-02-23 03:59:40 -06:00
Sebastianv650
9c65890644 [1.1.x] LIN_ADVANCE v1.5 (#9700) 2018-02-23 00:53:41 -06:00
Roman Moravčík
e41b2274b0 [1.1.x] Added missing slovak translation of MSG_THERMAL_RUNAWAY_BED. (#9764) 2018-02-23 00:48:16 -06:00
Scott Lahteine
85162da0df
Fix Z value on HD44780 (#9770) 2018-02-23 00:42:55 -06:00
Scott Lahteine
d55aaf95e8
Merge pull request #9761 from thinkyhead/bf1_lightweight_glcd 
[1.1.x] Lightweight status screen for ST7920
 2018-02-22 23:55:24 -06:00
Roman Moravčík
d6c416bb22 [1.1.x] Slovak translation update. (#9760) 2018-02-22 03:01:00 -06:00
Masterkookus
5f6a8588c5 [1.1.x] Hatchbox Alpha Config with E3Dv6 (#9721) 2018-02-22 02:57:38 -06:00
Scott Lahteine
1c95c13224 Lightweight status screen for ST7920 
- This status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller.
 2018-02-22 00:46:25 -06:00
Scott Lahteine
967076b080 Add LIGHTWEIGHT_UI to example configs 2018-02-22 00:25:53 -06:00
Scott Lahteine
855b188102
Hephestos2 heated bed kit for all (#9756) 2018-02-21 22:26:56 -06:00
Scott Lahteine
6759be43ea Add CR-10S _Bootscreen.h 2018-02-21 20:19:12 -06:00
Scott Lahteine
6e0001b4f8 Add CR-10mini configuration 2018-02-21 20:19:12 -06:00
Scott Lahteine
84f0ce4751 Some encoder steps handled in Conditionals_LCD.h 2018-02-21 20:19:11 -06:00
Scott Lahteine
d9e2acd1b2 Configs parity with 2.0.x 2018-02-21 20:19:11 -06:00
Scott Lahteine
e8f9473be2 Fix progress bar on DOGM with LCD_SET_PROGRESS_MANUALLY 2018-02-21 19:43:45 -06:00
Scott Lahteine
126a80ea83
Reduce Creality3D bootscreens flash usage (#9745) 2018-02-21 16:08:27 -06:00
Scott Lahteine
aa635fe9f1 pinsDebug patch 2018-02-21 14:21:07 -06:00
Roxy-3D
d473456a08
Fix botched check for being off the mesh... 2018-02-21 13:50:27 -06:00
Scott Lahteine
18881e6725 Add 20x4 option for Sainsmart LCD 2018-02-20 20:09:49 -06:00
Scott Lahteine
1d78bdac82 quick_home_xy sensorless homing 2018-02-20 20:09:45 -06:00
Scott Lahteine
e1fc89c83f Sanitycheck 2.0.x parity 2018-02-20 20:06:17 -06:00
Scott Lahteine
35800eec02 Fix big edit font width calculation 
Fix #9685
 2018-02-20 06:43:48 -06:00
Scott Lahteine
83e093f5cc Fix MALYAN_LCD message bug 
Fix #9711
Based on #9731
 2018-02-20 05:43:18 -06:00
Scott Lahteine
2b7e5c8e6c Extend menu items for SWITCHING_EXTRUDER 
In reference to #5367
 2018-02-19 11:11:04 -06:00
Scott Lahteine
3c2f735fb8 Conditionals for SWITCHING_EXTRUDER 
In reference to #5367. SWITCHING_EXTRUDER was not fully implemented for EXTRUDERS > 2.
 2018-02-19 10:58:06 -06:00
Scott Lahteine
e3370d097a Add a SENSORLESS_HOMING delay to quick_home_xy 
Fix #9471
 2018-02-19 10:11:25 -06:00
Scott Lahteine
f39b28b6a9 Null-terminate lcd_status_message 2018-02-19 10:07:22 -06:00
Scott Lahteine
b1ec140f0b Don't raise FIX_MOUNTED_PROBE on stow 
Reference #9336
 2018-02-19 08:34:25 -06:00
Scott Lahteine
6e932f979d CR-10 Bootscreen 
From @plainpylut in #9660
 2018-02-19 08:05:32 -06:00
Scott Lahteine
cc8711419e Add NUM_RUNOUT_SENSORS to example configs 2018-02-19 06:25:36 -06:00
Scott Lahteine
c04f8e8c9d Support for multiple filament runout sensors 2018-02-19 06:25:35 -06:00
Scott Lahteine
4813938a87 Update configs for 2.0.x parity 2018-02-18 19:42:20 -06:00
quittenkaes
971732b9f6 Add a delay before moving to z_safe_homing position if using TMC2130 sensorless homing (#9705) 
A short delay is needed after homing an axis with TMC 2130 sensorless homing. Otherwise the axis wont move.
 2018-02-18 19:29:06 -06:00
Scott Lahteine
1997640e41
Sync pinsDebug_list.h and apply macros (#9690) 2018-02-18 02:25:47 -06:00
Scott Lahteine
b45a277c52
ENDER can use BOARD_MELZI_CREALITY (#9694) 2018-02-18 02:24:23 -06:00
Scott Lahteine
016bd86c28
Add MSG_THERMAL_RUNAWAY_BED (#9695) 2018-02-18 02:24:08 -06:00
Scott Lahteine
65d69e9507 Strip excess G28 debug logging 2018-02-18 01:09:56 -06:00
Scott Lahteine
28e7562e7a Add CODEPENDENT_XY_HOMING to example configs 2018-02-18 01:09:51 -06:00
Scott Lahteine
2e5a6243df Option to force X or Y to home first when homing the other axis 2018-02-18 01:06:57 -06:00
Bob-the-Kuhn
d413781b98 Fix setPwmFrequency declaration (#9687) 2018-02-17 23:19:49 -06:00
Scott Lahteine
50d38e7d03 Pins spacing, 2.0.x parity 2018-02-17 21:49:00 -06:00
Scott Lahteine
80784c4d11 Remove sanity check for delta probe plug 2018-02-17 18:51:25 -06:00
Scott Lahteine
8761cb0464
Merge pull request #9682 from thinkyhead/bf1_m73_without_sd 
[1.1.x] Allow M73 without SDSUPPORT
 2018-02-17 15:50:19 -06:00
Scott Lahteine
aceadabe89
Merge pull request #9674 from bytespider/bugfix-1.1.x 
Add TronXY XY100 config
 2018-02-17 15:49:29 -06:00
Scott Lahteine
3a1fedaee6 Update LCD_SET_PROGRESS_MANUALLY in configs 2018-02-17 15:41:20 -06:00
Scott Lahteine
a1f0d9d349 Allow LCD_SET_PROGRESS_MANUALLY without SDSUPPORT 2018-02-17 15:41:20 -06:00
Scott Lahteine
c67cefd913 2.0.x parity in ultralcd__impl_HD44780.h 2018-02-17 15:41:20 -06:00
Scott Lahteine
c71f542d61 LCD_PROGRESS_BAR w/out SDSUPPORT for character LCD 2018-02-17 15:41:20 -06:00
Scott Lahteine
fe5ba25a00 Fix #9681 2018-02-17 15:39:46 -06:00
Scott Lahteine
4ae9afcc56 Fix compile error with SHOW_BOOTSCREEN disabled 
Fix #9530
Fix #9524
 2018-02-17 15:39:46 -06:00
Scott Lahteine
c3ff130127
Merge pull request #9672 from thinkyhead/bf1_czech_mate 
[1.1.x] Update Czech language
 2018-02-16 22:47:47 -06:00
Scott Lahteine
fbf8819253 Make safe_delay available for neopixel startup test 
Fix #9033
 2018-02-16 22:25:57 -06:00
Scott Lahteine
a7ebbe6dcd Update Czech advanced pause 2018-02-16 22:22:12 -06:00
Scott Lahteine
ada40af5d6 Move <avr/pgmspace.h> include to MarlinConfig.h 
For parity with 2.0.x, which includes pgmspace.h in the HAL.
 2018-02-16 18:40:39 -06:00
Scott Lahteine
ba4a17f251 Tweak serial.h 2018-02-16 17:54:07 -06:00
Scott Lahteine
12628d43ce Use serial macros where possible 2018-02-16 17:53:47 -06:00
Scott Lahteine
023d21a1cf Add SERIAL_FLUSH and SERIAL_FLUSHTX macros 2018-02-16 17:50:58 -06:00
Scott Lahteine
a8a64f19f4 serial_echopair_P => serial_echopair_PGM 2018-02-16 17:35:26 -06:00
Rob Griffiths
529e6ed1ea added TronXY XY100 config 2018-02-16 13:57:01 +00:00
Thomas Moore
acb4dba7cd Fix LCD manual movement on kinematic machines (#9656) 2018-02-16 02:30:05 -06:00
Bob-the-Kuhn
f508bdded4 Fix VIKI2 hardware SPI compatibility (#9642) 2018-02-16 02:28:42 -06:00
teemuatlut
20f8c9b950 TMC SGT is int8 (#9650) 2018-02-16 02:19:17 -06:00
Scott Lahteine
d7e2e655ca Followup to #9663 2018-02-16 02:14:20 -06:00
Bob-the-Kuhn
15204bd5e9 Fix compile issue with USE_CONTROLLER_FAN (#9665) 2018-02-16 02:02:20 -06:00
Scott Lahteine
2ec90d2162 Followup to #9663 
`ENABLED` only works for flag type options. Floats must use `#ifdef`.
 2018-02-15 22:23:27 -06:00
Scott Lahteine
b56c6b9e13
Patch G26 circles (#9626) 
Easier to configure. Catch an odd divisor.
 2018-02-15 22:11:06 -06:00
Bob-the-Kuhn
1647db8fad Set CONTROLLER_FAN_PIN example to -1 2018-02-15 21:29:09 -06:00
Roxy-3D
c8d3069580
UBL - Allow user to control Z-Height correction for off mesh movements (#9663) 
* UBL - Allow user to control Z-Height correction for off mesh movements

* Enable UBL_Z_RAISE_WHEN_OFF_MESH on test machine for time being
 2018-02-15 19:23:01 -06:00
Roxy-3D
b7e245036b
Fix a comment about M105 buffer over runs... 2018-02-14 17:49:50 -06:00
Roxy-3D
66370006bb
Fix G26 Circles... (#9638) 
Will get this duplicated in bugfix_2.0.0 tomorrow...
 2018-02-14 17:31:25 -06:00
Roxy-3D
3fcd131f46
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES 
There is significant downside to breaking up the long line segments on UBL Cartesian machines via the SEGMENT_LEVELED_MOVES mechanism.   It adds a lot of extra computation but worse...  It cuts out all of UBL's off mesh Z-Height correction checks.    There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately.   They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
 2018-02-14 14:19:52 -06:00
Scott Lahteine
0e7999915d Fix #9361 2018-02-14 07:47:39 -06:00
AnHardt
e301e28e45 Complete M48 description_1 (#9630) 2018-02-14 05:17:48 -06:00
Scott Lahteine
6e4a7e2dcb Init lcd message string programmatically 2018-02-14 05:08:06 -06:00
studiodyne
8fbba6abd9 [1.1.x] French update (#9610) 2018-02-14 04:17:54 -06:00
Scott Lahteine
e2fef4df6f Fix #9201 
FILAMENT_LCD_DISPLAY and SDSUPPORT are a-ok together.
 2018-02-14 03:28:05 -06:00
Scott Lahteine
c93dab2307 MYSERIAL => MYSERIAL0 
For cleaner diffing with Marlin 2.0.x.
 2018-02-14 02:56:56 -06:00
Scott Lahteine
d89a61bd51 Update DIGIPOT_I2C_MOTOR_CURRENTS comments 2018-02-13 22:56:03 -06:00
studiodyne
2683b2636b Update French language (#9590) 2018-02-12 01:08:33 -06:00
Scott Lahteine
7cb3640ea4 Restore welcome message 2018-02-12 01:01:09 -06:00
Scott Lahteine
dc85b604bb
Merge pull request #9591 from teemuatlut/bf1_fix_M914 
[1.1.x] Fix M914 macro
 2018-02-11 08:21:24 -06:00
Scott Lahteine
7e17a2cfd0 26-day-old buried patch to U.B.L. 2018-02-11 06:06:50 -06:00
Scott Lahteine
0acaaf536d Update gMax1.5+ for 2.0.x parity 2018-02-11 05:20:57 -06:00
Scott Lahteine
30b08e218d Patch Max7219 for parity with 2.0.x 2018-02-11 05:19:36 -06:00
teemuatlut
7babfbbcb2 Fix M914 macro 2018-02-11 13:08:55 +02:00
Scott Lahteine
2e7a754ac1 Megatronics baud rate 115200 
Fix #9092
 2018-02-11 03:42:27 -06:00
Scott Lahteine
61f3051982 Fix plan_arc clockwise (G2) 
Fix #9482
 2018-02-11 03:32:18 -06:00
Scott Lahteine
73419681dc Update PB Rev.F pins 2018-02-11 01:36:20 -06:00
Scott Lahteine
bb155ed38e Correct MOTHERBOARD for Geeetech i3 Pro X 
Fix #8856
 2018-02-10 20:27:11 -06:00
Scott Lahteine
7aad82cccd Fix auto_fan in pins.h 2018-02-10 20:02:17 -06:00
Scott Lahteine
18aa682954 Patch SILVER_GATE auto fan 2018-02-10 19:29:36 -06:00
Scott Lahteine
5e72729c67 Fix #8744 2018-02-10 16:51:55 -06:00
Scott Lahteine
f6a73bbd84 Patch Power class 2018-02-10 15:36:42 -06:00
Scott Lahteine
baaf79b755 Use signed for pin_t 2018-02-10 15:30:29 -06:00
Douglas Hammond
1e00ba5433 Add Tronxy X5S 2018-02-10 15:03:20 -06:00
Scott Lahteine
abda89437d Melzi boards include melzi pins 2018-02-10 15:03:20 -06:00
Scott Lahteine
d6d01f1f8e
Merge pull request #9571 from thinkyhead/bf1_french_update 
Update French language
 2018-02-10 14:15:13 -06:00
GMagician
5a39afb81b [1.1.x] Memory overflow protection (#9563) 2018-02-10 14:14:22 -06:00
Scott Lahteine
017e0e6951 Update French language 
Based on #9556 by @gege2b
 2018-02-10 14:06:02 -06:00
teemuatlut
7ee87dc2db Init CS pins before loading settings 2018-02-10 19:16:08 +02:00
Scott Lahteine
5a53e4d921
Merge pull request #9548 from thinkyhead/bf1_prevent_comments_resetting 
[1.1.0] Prevent watchdog reset due to many comments
 2018-02-09 07:15:10 -06:00
Scott Lahteine
8979990805
Merge pull request #9543 from thinkyhead/bf1_reliable_probe_heaters_off 
[1.1.x] More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
 2018-02-09 07:10:33 -06:00
Matteo Ragni
4e276c6e00 [1.1.x] Support for the Anycubic Trigorilla Board (1.3 at least) (#8367) 2018-02-09 05:38:21 -06:00
Scott Lahteine
96bcf08477 Tweak escape handling in serial input 2018-02-09 04:06:44 -06:00
Scott Lahteine
68cc5c72fd No EXTRUDER_RUNOUT_PREVENT during print 2018-02-09 03:36:42 -06:00
Scott Lahteine
06dff0b7ec Fix HAS_CONTROLLER_FAN in is_power_needed 2018-02-09 03:33:45 -06:00
Scott Lahteine
c4dbedd5b6 Prevent watchdog reset due to many comments 
Addressing #7449
 2018-02-09 01:50:42 -06:00
Scott Lahteine
9727e5e3d6 Minor comment/condition cleanup 2018-02-09 00:53:04 -06:00
Scott Lahteine
ad323d852e
Sanity check for SERIAL_PORT 
Addressing #7400
 2018-02-09 00:41:39 -06:00
Scott Lahteine
4300547c66
Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
Scott Lahteine
f61ff9c813 Firmware retraction lost change 2018-02-08 22:20:31 -06:00
Scott Lahteine
55071749b7 Minor changes for 2.0.x parity 2018-02-08 22:20:31 -06:00
Scott Lahteine
9dd8a49f82 Add pin_t to Marln 1.1 branch 2018-02-08 21:01:41 -06:00
Scott Lahteine
36ba754842 More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING 2018-02-08 21:01:41 -06:00
Scott Lahteine
3e838bf6b6 Cyclops has SINGLENOZZLE and higher temp 2018-02-08 19:07:43 -06:00
Scott Lahteine
b81980a439 TouchX base config differences 2018-02-08 19:07:43 -06:00
Rajesh Vaidheeswarran
98e7b821b4 Add Cyclops configuration for BIBO 2018-02-08 18:24:40 -06:00
GMagician
03f27a5e41 [1.1.x] Fix compile warning (#9540) 2018-02-08 17:59:24 -06:00
Scott Lahteine
cffbb146ea
Correct some retract() comments 2018-02-08 17:56:53 -06:00
Scott Lahteine
1ddbdd0321 Not yet, HAS_DISPLAY 2018-02-08 04:03:05 -06:00
Scott Lahteine
4f04f4e6b8 Followup to #9532 2018-02-08 03:39:20 -06:00
Scott Lahteine
c1a3ec1228
Tweaky followup to I2CPEM update 2018-02-08 03:21:46 -06:00
Scott Lahteine
bdbd15e6d9
Merge pull request #9504 from jaysonkelly/patch-1 
[1.1.x] I2C Position Encoders update
 2018-02-08 02:57:45 -06:00
Scott Lahteine
5c2cb60f03
Merge pull request #9518 from melvinisken/bugfix-1.1.x 
[1.1.x] Changed software serial pins to enable R/W access to TMC2208 drivers
 2018-02-08 02:56:58 -06:00
jaysonkelly
f8a8711075 I2C position encoders update 
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
 2018-02-08 02:46:12 -06:00
Scott Lahteine
b509567567
Merge pull request #9514 from FreeJaus/bugfix-1.1.x-eu 
update eu language
 2018-02-08 02:10:58 -06:00
Scott Lahteine
2c6c9e90df
Merge pull request #9508 from tnw513/fix-italian 
Fix italian translation
 2018-02-08 02:10:46 -06:00
Scott Lahteine
8438a57910 Followup to #9532 2018-02-08 02:05:18 -06:00
Thomas Moore
a471cd26e1 [1.1.x] Enable Z axis and delta sensorless homing (#9532) 2018-02-08 02:02:48 -06:00
Scott Lahteine
f3a09768e8 Tweak early handling of M108/M112/M410 2018-02-07 22:43:51 -06:00
Scott Lahteine
9509568b7e Patch utility for debug-leveling 2018-02-07 22:43:51 -06:00
Scott Lahteine
252ae1b52d Drop ubl.h include from steppers.cpp 2018-02-07 22:16:07 -06:00
Scott Lahteine
3137df9ad4 Special override of LCD_WIDTH 2018-02-07 22:16:07 -06:00
Scott Lahteine
42866db251 Fix compile with BLUETOOTH 
Addressing #7110
 2018-02-07 18:06:26 -06:00
Melvin Isken
0c6c96bb60 Changed software serial pins to enable R/W access to TMC2208 drivers 2018-02-07 09:52:49 +01:00
Scott Lahteine
3621f21fb2 Clean trailing space 2018-02-07 02:40:41 -06:00
1138-4EB
3d346f8398 update eu language 2018-02-07 01:12:37 +01:00
tnw513
41785a10dd Fix italian translation 2018-02-06 15:09:06 +01:00
Scott Lahteine
c4f1a191c3 Marlin.ino needs no content 2018-02-06 01:09:51 -06:00
Scott Lahteine
967bf41080 Add a proper comment for G26 2018-02-06 00:59:54 -06:00
Christopher Reimer
254417e8b0 Enable and disable power supply automatically 2018-02-06 00:20:33 -06:00
Scott Lahteine
80946a17ee Add AUTO_POWER_CONTROL to example configs 2018-02-06 00:20:26 -06:00
1138-4EB
b86dfd35ae Configs for Prusa i3 Pro B GT2560 Rev.A Plus 
One without probe and one with BLTOUCH.
 2018-02-05 23:54:19 -06:00
Scott Lahteine
527d260581 Add ULTI_CONTROLLER to example configs 2018-02-05 22:24:08 -06:00